Has anyone got a questionnaire template they could share with me for Office for Mac

Hi everyone
I am trying to create a questionnaire to print out for people to fill in by hand, I can see that on Microsoft website, there are loads of questionnaire templates but it will not let me open them on my Mac. Can anyone point me indirection of one or how I can open the Microsoft ones on my Mac. I am really desperate as need it for my uni work.
Many thanks
amfox1

Office templates are the same for Mac and Windows, I assume this is a Word template (or maybe Excel) what is the extension of the template file?
Forget it
I just went to Microsoft's template collection online, I downloaded 3 questionnaires, Risk Assessment, Customer Satisfaction and a Parent Survey, they all work in Word for Mac, so the question now is what are you doing that is different from what I am doing?
Microsoft Templates for Office

Similar Messages

Time Sheets - anyone have a template they could share?

Does any one have a time sheet template they could share. Trying to put together a sheet that can calculate the following:
IN LUNCH OUT TOTAL
8am 1 hr 5pm 7
ANy help would be appreciated.

I realize this is a year old post but am donating a timesheet I created in case it may be helpful to others. Disclaimer: I am an absolute newcomer to Livescycle designer, but this form is a place to start for others to add features.
The form uses JavaScript and accepts input from the user for the start date of the 2 week pay period, and then it calculates all the dates for the days of the week. It totals the hours entered and can be printed or emailed.
The target email address has been left intentionally blank, and will need to be entered manually.
Hope some find it useful...
> http://www.davidbartholomew.com/PDF_TimeSheet.pdf
---and that Karma returns other kindnesses to me.
-David

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Has anyone got a belkin f1up0002uk print server working with OS X 10.4.10

I've got an HP all-in-one printer and want to share it wirelessly with my Macs and PCs. I've got a netgear wireless router/access point. I've just bought a belkin print server (model # f1up0002uk) but this appears to be windows only compatible.
Before opening the belkin box I did a search on the internet - I couldn't find anything specific on this model of router working with a Mac.... however, from my research I get the feeling it should be possible to get it working on a Mac through IP printing.
Has anyone used this print server with a Mac and got it working? Failing that, any pointers would be greatly appreciated.
Thanks
VP

Greg,
Thanks for your response. It turns out that my original fears were unfounded.
Installing the print server was very straight foward and after getting it working on one of my XP boxes I was able to install it on my MacBook using *Print & Fax* ---> *IP Printer* ---> Protocol ---> _Line Printer Daemon - LPD_ ---> Address ---> _Belkin Print Server IP Address_.
I checked to see if OS X provided a driver for my all-in-one printer (HP PSC 2175) and the following page http://docs.info.apple.com/article.html?artnum=303057 said there was one but it wasn't available in my printer pull down list. Further research through HP revealed that other drivers could be used and fortunately there were Gimp-Print 5.0.0 beta 2's available so I used the HP 500C driver.
I also had to reserve the IP address of the print server on my wireless (Netgear) router but I left DHCP on for the rest of my devices.
The end result is that the Belkin Print Server now works across my mixed Mac and PC network. Unfortunately I'm not able to use the scanner through my Macs but this isn't an issue as my priority was to share printing. I should also mention that the Belkin manual also includes instructions for Unix/Linux and OS X, although this is not stated on the box.
VP.

I want to save battery life on the new iPod touch 5th Generation, but I cannot find any solutions on the web? Has anyone got any solutions that I could use to extend the battery life?

If you have any solutions, please leave some under this discussion.
Thank you :-)

I'd say this article does a good job with that.
Apple - Batteries - iPod

Has anyone got elisa running?

has anyone got elisa running?
i've installed now elisa for the 3-4 time in ~one year and it's still not running. at least i get now the shiny start menu, but when i choose video, music, etc entry and then a directory it simply does nothing and gives out tons of debug errors/messages. and yes, i ugraded to the latest plugins package. don't trust shiny things...
vlad
ps: ??? the youtube plugin seems to work ... no it doesn't: i get this strange error "Message: don't know how to handle video/x-h264". though i have _all_ gstreamer-{ugly,dirty,good,evil}-plugins installed.
elisa is made for the ubuntu people. should it then just simply work? hmm
Last edited by DonVla (2008-07-15 19:19:05)

wonder wrote:there are missing dependency: pil and python-pysqlite.
extra/python-pysqlite-legacy 1.0.1-4 [installed]
A Python DB-API 2.0 interface for the legacy SQLite 2
extra/python-pysqlite 2.3.5-1 [installed]
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
extra/pil 1.1.6-4 [installed]
Python imaging library
all installed....
btw: i don't get the packaging policy for elisa: why is there elisa and elisa-plugins? and why is elisa a dep for elisa-plugins and not the other way round? the install file says: "PLEASE NOTE: elisa-plugins package is needed at elisa to work". hence it's a dependency...
Last edited by DonVla (2008-07-15 19:24:55)

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

Hi Vivek,
Thanks a lot for replying, actually i am creating a short LAMP animation. In which i used Blur filter on the fire flares(SVG images), everything works just fine on google chrome, but for IE10 & Firefox the filter seems not working, so i need to know is it possible to override the fallbacks for the Blur Filter through external StyleSheet.
IE10 & firefox rendered Image, blur filter not working Google Chrome rendered Image, blur filter working perfectly
So, can you please guide me, what shall i do in maintaining quality of my graphics as well while such animation's.

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone got PPTP VPN to work on Lion Server?

Has anyone got PPTP VPN to work on Lion Server?
I had a go with the terminal commnds posted by apple support but no joy. Since then Apple has pulled the suport article - is it because it didn't work?
I get PPTP is less secure but PPTP seems to be more reliable don't know whey they can't keep as GUI. I've got them both running on our 10.4 server and L2TP stoped allowing connections for no reason PPTP was still working L2TP started working again on its own. Plus L2TP drops my connection when I connect with a 2nd device e.g connected with my Macbook connect with my iPhone (different username) it drops my Macbook.
Any advice getting PPTP to work on Lion Server would be appreciated
Thanks
Ben

Hi,
I have posted a bugreport on this issue to Apple. Currently (10.7.2) it is not possible to run PPTP on any Mac OS X Server when using a 10.7 Server as Directory Server.
I have tried 'everything', but the MPPE encryption mechanism seems to be broken.
Edit: I see now that the bugreport is filed as a duplicate to an older case, which is now closed. I hope this means they have found the problem and will release a fix in the next update.

Has anyone got Python to work on the N96???

Has anyone got Python to wok on the N96?
I have downloaded and installed the latest edition 3rd 1.4.4 i think. it goes on the phone without any problems.
However when trying to use app that use python specifically pyPiow at the moment the app goes on the phone but nothing happens when i try to open it!
is it somthing i am doing wrong, where go i install the pictures, or the apps for that matter, can the apps go on the mass memory where they are now or do they have to go on the very small phone memory?!
does current python work at all on the n96
has anyone had any joy?
please help!
cheers

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Has anyone got experience of Windows 10 please ?

Hi,
Aplogies if this is the wrong board, I could not find a better one. I'm sure a CL will move it if it is.
I tried a search for "Windows 10" and all it returned was a post about NetProtect.
Has anyone got experience of Windows 10 please ? Is it better or worse than Windows 7, 8 or 8.1 ?
Best regards,
dfenceman

gg30340 wrote:
As the "free" upgrade option is available for a year after the launch of Windows 10, I would advise against being an early adopter. There will be the inevitable initial problems that seem to happen to all new Windows operating systems so I would wait for a few months until any problems/glitches etc are ironed out before upgrading your system.
@barnpiece
and @gg30340
Wise comments, I think.
Upgrading to Vista from XP destroyed a very expensive, and powerful 3d graphics program of mine. It's going to cost another £400+ just to upgrade to the Windows 8 version.
It can be run, with considerable difficulty on Windows 7, in Windows compatibility mode.
For Windows 10, there are similar considerations.
There are posts on the Windows, or perhaps Internet Security websites, assuring us that all will be fixed on the day
Windows states that "most" programs compatible with Windows 7 or Windows 8.1, will be compatible with Windows 10.
Just wait for a while.

Has anyone got an answer to fix ios5 problem, no sim card inserted...

Has anyone got an answer to fix ios5 problem, no sim card inserted...

I bought a new sim card today at the t-mobile shop and they activated the card just by putting credit on, i got home put the sim in the iphone and still got the same message. I have restored and shut down I dont know how many times and updated itunes, I am wishing i had said no to updating the phone as i have no iphone to use and apple say i should go to an apple shop.

Back to Mac - Has anyone got it working?

I've hooked my laptop up to another ISP and i can't see my desktop in the Shared Section. When i'm on the same network I can see the desktop, share the screen and all that fun stuff. Has anyone got it working? Could it be my network configuration?

I had a read through the manual that came with Leopard last night and was a little dissapointed to read this part in regard to Back to My Mac:
With your .Mac membership, an internet connection, and Back to My Mac and sharing services turned on, you can access any of your computers from anywhere on the internet."
Sounds like you might need a .Mac account for Back to My Mac. I think you can do the same kind of thing with iChat though so i guess you can still take control of someones Mac over the net to help them fix a problem. But you may need .Mac account to, for example, access your home computer from your work computer.
I could be completely wrong and im certain someone will point this out if i am wrong. Im still getting to grips with all the new features here.

Has anyone got a questionnaire template they could share with me for Office for Mac

Similar Messages

Maybe you are looking for