Has anyone got a replacement magic mouse out of Apple?

Having my mouse lose connection about 6 or more times per day since mid-July, and having tried all the remedies on this and other Discussions, and advice from AppleCare, with no success, I plan to ask Apple for a replacement Magic Mouse under my iMac guarantee.
Has anyone succeeded in getting a replacement for any reason?

Steve,
I haven't needed to but I've read of many users who got a "no questions asked" replacement. I think you should persue it.
Regards,
Captfred

Similar Messages

HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Has ANYONE got a 'faulty' superdrive to work without replacing it?

There are many tales of people here with dodgy sauperdrives. Now I have one in a 2 year old eMac. So before I spend money replacing the superdrive, has anyone got their's going by way of software or cleaning or dancing around their Mac chanting to the sky?
Steve

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has anyone got there iPod nano replacement

Has anyone got there iPod nano replacement and is it a 6th gen or a referbed 1st gen? my replacement has be stuck on step 3 for about a week Pictures would be nice, Thanks

Im not complaining really I just really want to know what ipod i will get

I just noticed that when I talk on skype, my friends can not hear me as clear. I went to sound setting on the mac and noticed that my voice was getting picked up to good regardless of chaning the setting. Has anyone got any idea??

I just noticed that when I talk on skype, my friends can not hear me as clear. I went to sound setting on the mac and noticed that my voice was getting picked up to good regardless of chaning the setting. Has anyone got any idea??

Basic troubleshooting from the User's Guide is reset, restart, restore. Has any of this been tried?
It is possible that dropping the device has caused the issue.... regardless, it's unlikely Apple would do a warranty exchange since there is obvious user damage.
If basic troubleshooting does not resolve the issue, take it to an Apple store for evaluation... if determined to be a hardware issue and you ask nicely, they may be able to assist you, but they may also only provide the option of an Out of Warranty replacement.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone got elisa running?

has anyone got elisa running?
i've installed now elisa for the 3-4 time in ~one year and it's still not running. at least i get now the shiny start menu, but when i choose video, music, etc entry and then a directory it simply does nothing and gives out tons of debug errors/messages. and yes, i ugraded to the latest plugins package. don't trust shiny things...
vlad
ps: ??? the youtube plugin seems to work ... no it doesn't: i get this strange error "Message: don't know how to handle video/x-h264". though i have _all_ gstreamer-{ugly,dirty,good,evil}-plugins installed.
elisa is made for the ubuntu people. should it then just simply work? hmm
Last edited by DonVla (2008-07-15 19:19:05)

wonder wrote:there are missing dependency: pil and python-pysqlite.
extra/python-pysqlite-legacy 1.0.1-4 [installed]
A Python DB-API 2.0 interface for the legacy SQLite 2
extra/python-pysqlite 2.3.5-1 [installed]
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
extra/pil 1.1.6-4 [installed]
Python imaging library
all installed....
btw: i don't get the packaging policy for elisa: why is there elisa and elisa-plugins? and why is elisa a dep for elisa-plugins and not the other way round? the install file says: "PLEASE NOTE: elisa-plugins package is needed at elisa to work". hence it's a dependency...
Last edited by DonVla (2008-07-15 19:24:55)

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

Has anyone got Safari to work with Kerberos (SPNEGO) ?

Has anyone got Safari to with using Negotiate (SPNEGO with Kerberos) when the system is not bound to ActiveDirectory or Macs OpenDirectory?
I can load Firefox and it works fine, but Safari does not work. I keep hearing that Safari works out of the box, but its looks like its somehow tied to AD or Macs Opendirectory and its deployment of Kerberos.

I am having the same problem and checked out the Apple Discussions for a solution.
I too am meticulous with my addresses.
Seeing no solution I went back to testing.
I have tried:
From Shrewsbury
To Telford
The result was a trip in the US taking 14 hours.
Then I tried:
From Shrewsbury UK
To Telford UK
This worked.
When on the "Get Directions" screen there is a "Globe" icon by the "Space" icon. Pressing this brings up "English (US)". Press again and you get "English (UK).
Any ideas?
When I use the "Contacts" to get the Start and End fields the iPhone is bringing up the correct address but with "United States" at the end of the address.
Again any ideas?
In my Address book I never use the "Country" field as all my contacts are in the UK. I wonder if this is the problem and the iPhone is defaulting to US in the absence of no "Country"?
Help!

Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Ios 8 keeps crashing on my iPad 2. Has anyone got a solution to this. My iPad 2 was great before upgrading.

ios 8 keeps crashing on my iPad 2. Has anyone got a solution to this. My iPad 2 was great before upgrading. It's so bad that now I want to throw my iPad out so if anyone has tips to enhance my iPads performance please share.

I would read up on restoring your device
Restore
http://support.apple.com/kb/HT1414
Especially if you installed the update over the air, a restore, which will use a computer to install the iOS again sometimes helps. There seems to be better results from doing it via iTunes than over the air

Has anyone got iFS working in Tomcat ?

iFS 1.1.9
We have a urgent need to get iFS running in a Servlet 2.2 container and OC4J does not support iFS yet. I know this is not supported but has anyone got iFS working in Tomcat ? If so, pls do me a BIG favour by letting me have your config files, such as
- server.xml
- <tomcat home>\conf\web.xml
- web.xml for the tomcat context)
- wrapper.properties (if you are using tomcat as an NT service)
- tomcat-apache.conf (or equivalent)
- <oracle home>/apache/apache/conf/httd.conf
- A listing of relevant environment variables (by doing a "set>env.lis" or similar)
- and any other files you might think is relevant
Thanks a million in advance.
null

iFS 1.1.9 / Oracle 8.1.7 / Tomcat 4.0.1 / Windows 2000
After several hours of fiddling around with the configuration
files, I finally got the iFS up and running on my test machine.
Briefly here's what I did:
1) create application directories
<tomcat_home>/ifs/files/WEB-INF/classes
<tomcat_home>/ifs/files/WEB-INF/lib
2) Add the following to <tomcat_home>/conf/server.xml:
<Context path="/ifs/files" docBase="ifs/files"
debug="0" reloadable="true">

<Environment name="ORACLE_HOME" type="java.lang.String"
value="oracle_home"/>
<Environment name="ORACLE_SID" type="java.lang.String"
value="sid"/>
<Environment name="LD_LIBRARY_PATH" type="java.lang.String"
value="oracle_home/lib:oracle_home/ctx/lib"/>
<Environment name="NLS_LANG" type="java.lang.String"
value=".UTF8"/>
</Context>
Please replace oracle_home with your installation directory and
fill in your SID as well.
3) create <tomcat_home>/<tomcat_home>/ifs/files/WEB-INF/web.xml
with the following definitions:
<servlet>
<servlet-name>oracle-jsp</servlet-name>
<servlet-class>oracle.jsp.JspServlet</servlet-class>
<init-param>
<param-name>logVerbosityLevel</param-name>
<param-value>WARNING</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>oracle-ifs-servlet</servlet-name>
<servlet-
class>oracle.ifs.protocols.dav.impl.IfsDavServlet</servlet-class>
<init-param>
<param-name>classpath</param-name>

<param-value>
tomcat_home/webapps/ifs/files/WEB-INF/lib/ojsp.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/webui.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/adk.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/http.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/repos.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/email.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/release.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/utils.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/settings.jar;
tomcat_home/webapps/ifs/files/WEB-INF/classes;
tomcat_home/lib/xmlparserv2.jar;
tomcat_home/lib/classes12.jar;
tomcat_home/common/lib/servlet.jar;
</param-value>
</init-param>
<init-param>
<param-name>ifs.dav.servicepassword</param-name>
<param-value>manager</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>page_provider</param-name>
<param-
value>oracle.ifs.protocols.dav.impl.jsp.IfsJspResourceProvider</p
aram-value>
</init-param>
<init-param>
<param-name>page_repository_root</param-name>
<param-value>ifs_home/ifsjsps</param-value>
</init-param>
<init-param>
<param-name>unsafe_reload</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>oracle-ifs-servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>oracle-jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
tomcat_home and ifs_home must be replaced with your installation
directories.
4) Copy the iFS and Oracle JARs to the locations specified in
web.xml
You may choose either the applications lib directory or the more
general tomcat_home/lib for that purpose.
One hint on libraries: Tomcat will ignore ZIP files, you have to
use JAR. I renamed Oracle's classes12.zip to classes12.jar for
that reason.
5) Create settings.jar
This was the most tricky part. I packed everything under
ifs_home/settings into the file settings.zip, renamed this to
settings.jar and moved it to the WEB-INF/lib directory. Seems a
bit of a kludge to me, anyone with a better solution is welcome.
6) Start tomcat
7) try http://yourtomcathost:8080/ifs/files/index.html
You should see the ifs login screen then.
One word about the application environment. In this
configuration every user class has to go into
<tomcat_home>/ifs/files/WEB-INF/classes, the
ifs_home/user_classes is of no use here. And don't try to set
the classpath within catalina.bat, tomcat will completely ignore
this setting.
Finally, I know that this environment is not supported but as
long as the iFS servlet meets the standards, every standard
compliant servlet engine should do the job.
Good luck

Has anyone got experience of Windows 10 please ?

Hi,
Aplogies if this is the wrong board, I could not find a better one. I'm sure a CL will move it if it is.
I tried a search for "Windows 10" and all it returned was a post about NetProtect.
Has anyone got experience of Windows 10 please ? Is it better or worse than Windows 7, 8 or 8.1 ?
Best regards,
dfenceman

gg30340 wrote:
As the "free" upgrade option is available for a year after the launch of Windows 10, I would advise against being an early adopter. There will be the inevitable initial problems that seem to happen to all new Windows operating systems so I would wait for a few months until any problems/glitches etc are ironed out before upgrading your system.
@barnpiece
and @gg30340
Wise comments, I think.
Upgrading to Vista from XP destroyed a very expensive, and powerful 3d graphics program of mine. It's going to cost another £400+ just to upgrade to the Windows 8 version.
It can be run, with considerable difficulty on Windows 7, in Windows compatibility mode.
For Windows 10, there are similar considerations.
There are posts on the Windows, or perhaps Internet Security websites, assuring us that all will be fixed on the day
Windows states that "most" programs compatible with Windows 7 or Windows 8.1, will be compatible with Windows 10.
Just wait for a while.

Has anyone got a clue how to solve this conundrum?

Just bought ipad air. Entered ID details. Received email on my PC. Checked 'Verify Now' box. Link failed. Repeated over 50 times. All failed. Has anyone got a clue how to solve this conundrum? The wife is tearing her hair out and ranting on about litigation.

Thanks for reply Demo. What I mean by 'failed' is nothing happened when I hit the 'Verify Now' box on the email from Apple in my Inbox I expected to move to another page to enter further details but that didn't happen and there was no message saying 'verification accepted' or similar. I spoke to Apple Support and after about an hour she advised me to speak to a friend. If my friend can solve this, Apple needs to give her a job. Thanks again.

Back to Mac - Has anyone got it working?

I've hooked my laptop up to another ISP and i can't see my desktop in the Shared Section. When i'm on the same network I can see the desktop, share the screen and all that fun stuff. Has anyone got it working? Could it be my network configuration?

I had a read through the manual that came with Leopard last night and was a little dissapointed to read this part in regard to Back to My Mac:
With your .Mac membership, an internet connection, and Back to My Mac and sharing services turned on, you can access any of your computers from anywhere on the internet."
Sounds like you might need a .Mac account for Back to My Mac. I think you can do the same kind of thing with iChat though so i guess you can still take control of someones Mac over the net to help them fix a problem. But you may need .Mac account to, for example, access your home computer from your work computer.
I could be completely wrong and im certain someone will point this out if i am wrong. Im still getting to grips with all the new features here.

Has anyone got a replacement magic mouse out of Apple?

Similar Messages

Maybe you are looking for