Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Similar Messages

Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Has anyone got the saaj or server service working in the coffee break app

i get both FAIL - Service could not be started at context path server and saaj-coffee-break, is there any obvious thing it could be

i build the common first
then i build the jaxrpc service and publish it in registry
then i build and install the saaj service, but it fails to start in tomcat manager
same with server.
i use tomcat and j2sdk1.4

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

Has anyone gotten the new 640x480 videos to work?

Has anyone gotten the new videos to transfer to their ipod? Mine keeps saying that they are not supported by ipod. Also does anyone know what bitrate for video is now supported?

On Tuesday I updated my 8 month old video iPod with 1.2. This morning I successfully transferred Mulan I downloaded off iTunes and played it out to a normal TV. I did not see any compression artifacts that I would normally see from the previously downloaded TV shows such as Battlestar Galactica. This probably means that it has the more updated resolution.
Core Duo Mini Mac OS X (10.4.7)

Has anyone got the 850 4010 I/B EDI file processed & translated via B2B?

Has anyone successfully translated an inbound EDI 850 4010 file via B2B?
We are using 11.1.1.4 weblogic, B2B Document Editor 6.6.0.2801
Eventually, it needs to be integrated to SOA
For us, it is failing on the console with B2B-50037: B2B inbound message processing error & SOA diagnostic log has the following errors:
oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/Seeded_850_4010.ecs
B2B-50025: Repository error at oracle.tip.b2b.mds.QueryManager.getBlob(QueryManager.java:2904)

Seems your B2B repository has got corrupted. You are using older version of B2B Document Editor but it will not cause this issue.
Take an export of your B2B repository, purge the design time repository and re-import it again. Deploy the agreement and test again.
Regards,
Anuj

Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
Versions I've tried this on:
Kubuntu 10.04, 32- and 64-bit
Ubuntu 10.04, 32-bit
Kubuntu 9.10, 32-and 64-bit
I am stumped. Has anyone successfully gotten this to work?
best,
-p.
Solved!
Go to Solution.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

Hi,
Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
I have installed the 32bit version of the agent as my web site must support 32 bit applications.
I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
Thanks in advance,
Tommy.

I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
Thanks

Has anyone a jasper 6.8 example that works fine with JSC/JSF ???

Has anyone just a jasper 6.8 example that works fine with JSC 2 / JSF ???
Because I tried everything and it still doesn't want to do anything, and the code provided in this forum : http://swforum.sun.com/jive/thread.jspa?threadID=50166&tstart=0 doesn't work will other files or other than 6.1 Jasper version.
thanks a lot
Pierre

Thank you for your answer, but this is exactly the thread I used and that I mentionned in my first message !!!
this jasper example works fine with Creator only with the provided jasper file and the provided library. If I try to compile the jrxml provided, to change the library and so on, it doesn't work anymore, I don't know why.
On this thread you can see more details :
http://sourceforge.net/forum/forum.php?thread_id=1311641&forum_id=113530
thanks for your help,
Pierre

Has anyone got a belkin f1up0002uk print server working with OS X 10.4.10

I've got an HP all-in-one printer and want to share it wirelessly with my Macs and PCs. I've got a netgear wireless router/access point. I've just bought a belkin print server (model # f1up0002uk) but this appears to be windows only compatible.
Before opening the belkin box I did a search on the internet - I couldn't find anything specific on this model of router working with a Mac.... however, from my research I get the feeling it should be possible to get it working on a Mac through IP printing.
Has anyone used this print server with a Mac and got it working? Failing that, any pointers would be greatly appreciated.
Thanks
VP

Greg,
Thanks for your response. It turns out that my original fears were unfounded.
Installing the print server was very straight foward and after getting it working on one of my XP boxes I was able to install it on my MacBook using *Print & Fax* ---> *IP Printer* ---> Protocol ---> _Line Printer Daemon - LPD_ ---> Address ---> _Belkin Print Server IP Address_.
I checked to see if OS X provided a driver for my all-in-one printer (HP PSC 2175) and the following page http://docs.info.apple.com/article.html?artnum=303057 said there was one but it wasn't available in my printer pull down list. Further research through HP revealed that other drivers could be used and fortunately there were Gimp-Print 5.0.0 beta 2's available so I used the HP 500C driver.
I also had to reserve the IP address of the print server on my wireless (Netgear) router but I left DHCP on for the rest of my devices.
The end result is that the Belkin Print Server now works across my mixed Mac and PC network. Unfortunately I'm not able to use the scanner through my Macs but this isn't an issue as my priority was to share printing. I should also mention that the Belkin manual also includes instructions for Unix/Linux and OS X, although this is not stated on the box.
VP.

Parental Controls - Has anyone in the world actually made it work?

This function has got to be the least thought out, badly implemented area of any Mac OS X operating system. To put it bluntly, it's a pile of $hit! Normally I don't complain about my macs but the parental controls are driving me up the wall.
It's so bad I've had remove it from the kids account which defeats the object of it being there in the first place. I tried using the restricted access but impeded them enormously when researching for school projects etc, so I switched it to unrestricted accesss but even that doesn't allow any kind of accesss to secure webpages, so they can't upload their school work on the school's database, etc. I've resorted to manually dumping some restricted websites into the hosts file, which is a right pain in the arse.
I haven't even got as far as some of the other complaints that I have read. The time controls that don't work, circumventing passwords when pressing cancel, etc, etc. Who did Apples assign this programming to? The catering staff? Microsoft? Even Microsoft have got an infinitely better built in parental controls system in Vista.

Try downloading and installing the Leopard Server Admin Tools (works fine on standard Leopard; OS X Server not needed), and then use Workgroup Manager to set limits on accounts. There's a whole lot more fine-grained control with WM. It's like Parental Controls on steroids.

Has anyone got the AirPort Client Update 2009-00 to work

As I have frequently posted here SL has killed my Airport.
Having waited patiently for FOUR MONTHS Apple have finally issued AirPort Client Update 2009-00.
It makes no difference to me.
Has this actually worked for anyone?

In my case, I bought my MBP with Tiger then upgraded to SL and it made my airport behave randomly soo I opted to roll back the OS until a fix is made to the issue.

Has anyone got the Comsoft Profinet example code working??

Similar Messages

Maybe you are looking for