Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Similar Messages

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

TS4069 Has anyone resolved the yahoo server unavailable on the iPad when trying to rest email account

Has anyone resolved the yahoo server unavailable issue with iPad

the issues are on Yahoo's end. They have been updating/upgrading their servers for the past few weeks, and when they are working on the server your mail is on, you will experience outages.
Usually all you can do is just wait it out or try a different way to access. For example I accessed my mail via safari when mine weren't working.

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

I am trying to import external CSS in Edge Animate, Has anyone got a "simple" example showing this working that I could have a look at?

Hi Vivek,
Thanks a lot for replying, actually i am creating a short LAMP animation. In which i used Blur filter on the fire flares(SVG images), everything works just fine on google chrome, but for IE10 & Firefox the filter seems not working, so i need to know is it possible to override the fallbacks for the Blur Filter through external StyleSheet.
IE10 & firefox rendered Image, blur filter not working Google Chrome rendered Image, blur filter working perfectly
So, can you please guide me, what shall i do in maintaining quality of my graphics as well while such animation's.

Has anyone got Contact and Calendar sharing to work?

I cannot believe I've been duped again. This borders on false advertising as far as I am concerned. How is it that Apple can connect and share Contact and Calendars with Exchange beautifully, but can't create this functionality in their own Server? Maybe it can be configured via the command line, but if I wanted to do that, I wouldn't be a Mac User. I am an Apple Consultant and every small business I service wants this more than any other function. They don't want a stupid WIki page, they want to use iCal and Address Book. Ultimately, I have to recommend MS Small Business Server. An absolutely pathetic situation.

BrianFL -
I guess it depends on your needs. I run a shared mac-only office environment and came up with a few solutions with Lion Server. (minding that I don't interact with Exchange at all)
I'm in an environment where all users are authenticated to the Lion Server
== iCal ==
1. Delegated Locations & Resources: From the Server App, with iCal Server on, you can create Location / Resource calendars, and then designate who has the authority to manage the calendar. For our purposes, I created one Calendar, and then the the delegate, I added the apropriate use group. From there - each user has creates a CalDAV with their user cred's in iCal - and then (this is the important part) Select the created account - and select the calendar(s) you wish to view in the delegation tab. From there - that one Resource calendar can house any number of calendars inside it.
The only downside here - is that iOS doesn't really deal with delegated calendars well - so you won't be able to see shared calendars you've setup.
Create a phantom account. This isn't quite as clean, but you could create a dummy user on the Lion Server - and then have users all create accounts in iCal using the same Cred's. Not as secure though.
An Upside is that iOS devices will be able to get at these.
== Address Book ==
Unfortunately, Here, I've had to rely on a phantom user account called "OfficeShared" which contains groups, contacts etc. that everyone in the office shares. I'd be interested if anyone had any tips here. (Keeping in mind that Open Directory may very well be a possible option if you're dealing with MS server)
Of course, if you're using Microsoft Applications, your MS Small Business server will always be ideal - but I've found OSX server to be a no-maintenance, no babysitting solution for an office full of Macs.

Parental Controls - Has anyone in the world actually made it work?

This function has got to be the least thought out, badly implemented area of any Mac OS X operating system. To put it bluntly, it's a pile of $hit! Normally I don't complain about my macs but the parental controls are driving me up the wall.
It's so bad I've had remove it from the kids account which defeats the object of it being there in the first place. I tried using the restricted access but impeded them enormously when researching for school projects etc, so I switched it to unrestricted accesss but even that doesn't allow any kind of accesss to secure webpages, so they can't upload their school work on the school's database, etc. I've resorted to manually dumping some restricted websites into the hosts file, which is a right pain in the arse.
I haven't even got as far as some of the other complaints that I have read. The time controls that don't work, circumventing passwords when pressing cancel, etc, etc. Who did Apples assign this programming to? The catering staff? Microsoft? Even Microsoft have got an infinitely better built in parental controls system in Vista.

Try downloading and installing the Leopard Server Admin Tools (works fine on standard Leopard; OS X Server not needed), and then use Workgroup Manager to set limits on accounts. There's a whole lot more fine-grained control with WM. It's like Parental Controls on steroids.

Has anyone gotten the new 640x480 videos to work?

Has anyone gotten the new videos to transfer to their ipod? Mine keeps saying that they are not supported by ipod. Also does anyone know what bitrate for video is now supported?

On Tuesday I updated my 8 month old video iPod with 1.2. This morning I successfully transferred Mulan I downloaded off iTunes and played it out to a normal TV. I did not see any compression artifacts that I would normally see from the previously downloaded TV shows such as Battlestar Galactica. This probably means that it has the more updated resolution.
Core Duo Mini Mac OS X (10.4.7)

Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
Versions I've tried this on:
Kubuntu 10.04, 32- and 64-bit
Ubuntu 10.04, 32-bit
Kubuntu 9.10, 32-and 64-bit
I am stumped. Has anyone successfully gotten this to work?
best,
-p.
Solved!
Go to Solution.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

Hi,
Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
I have installed the 32bit version of the agent as my web site must support 32 bit applications.
I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
Thanks in advance,
Tommy.

I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
Thanks

Has anyone got the 850 4010 I/B EDI file processed & translated via B2B?

Has anyone successfully translated an inbound EDI 850 4010 file via B2B?
We are using 11.1.1.4 weblogic, B2B Document Editor 6.6.0.2801
Eventually, it needs to be integrated to SOA
For us, it is failing on the console with B2B-50037: B2B inbound message processing error & SOA diagnostic log has the following errors:
oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/Seeded_850_4010.ecs
B2B-50025: Repository error at oracle.tip.b2b.mds.QueryManager.getBlob(QueryManager.java:2904)

Seems your B2B repository has got corrupted. You are using older version of B2B Document Editor but it will not cause this issue.
Take an export of your B2B repository, purge the design time repository and re-import it again. Deploy the agreement and test again.
Regards,
Anuj

Has anyone got the saaj or server service working in the coffee break app

i get both FAIL - Service could not be started at context path server and saaj-coffee-break, is there any obvious thing it could be

i build the common first
then i build the jaxrpc service and publish it in registry
then i build and install the saaj service, but it fails to start in tomcat manager
same with server.
i use tomcat and j2sdk1.4

Has anyone got the Lion Server wiki to work?

Similar Messages

Maybe you are looking for