Has anyone got the screen flick problem solved?

as above thanks.
(i am starting to get irritated of the flicking screen)

finally got my computer back with more problems than I sent it in with I think. They put in a new logic board, battery, and super drive. I no longer can see my serial number in the about this mac window. also, the battery is loose and sometimes the meter reads 0% and sometimes it will not turn on. I dont know what the deal is. The people that fixed it are in the middle of selling the store so I dont feel like deeling with them for a while until they get all moved. I might just call applecare in the morning or something. I hate this, I am having the worst luck with all my electronics lately.

Similar Messages

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

Has anyone got a clue how to solve this conundrum?

Just bought ipad air. Entered ID details. Received email on my PC. Checked 'Verify Now' box. Link failed. Repeated over 50 times. All failed. Has anyone got a clue how to solve this conundrum? The wife is tearing her hair out and ranting on about litigation.

Thanks for reply Demo. What I mean by 'failed' is nothing happened when I hit the 'Verify Now' box on the email from Apple in my Inbox I expected to move to another page to enter further details but that didn't happen and there was no message saying 'verification accepted' or similar. I spoke to Apple Support and after about an hour she advised me to speak to a friend. If my friend can solve this, Apple needs to give her a job. Thanks again.

Has anyone removed the screen protector from Otterbox?

I have the Otterbox on top of Apple's anti-glare screen protector as suggested in this forum. I'm having way too much trouble getting a response out of buttons on the edge of the screen or in the corners. I touch and touch, even press hard but no response. Even getting the phone to snap a picture is near impossible. I have no problems when I remove the Otterbox case, so I know it isn't a screen issue. I love the feel and protection afforded by the Otterbox case and would like to use it. Has anyone removed the screen protector from their case, and if you have, can you comment on the subsequent performance of it? Of note, I use the Otterbox case because I have young kids who use the phone - we don't have a landline. In other words, it's not dust protection I'm looking for, but impact protection. I hate to tear up a $50 case if it won't function anymore.

I removed the screen protector that was part of the Otterbox case and it now works much better. Still have the Power Support anti-glare screen protector on it. Also removed the small cover over the camera lense and now my pictures are more clear. Finally, I removed the covers over the speakers and I can hear the speakerphone again. These mods made the case an A+ for me. A little less protection but much better functionality.

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
Versions I've tried this on:
Kubuntu 10.04, 32- and 64-bit
Ubuntu 10.04, 32-bit
Kubuntu 9.10, 32-and 64-bit
I am stumped. Has anyone successfully gotten this to work?
best,
-p.
Solved!
Go to Solution.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Do Core 2 Duo Macbooks have the screen-flicker problem?

Hi,
I have an Intel Macbook (single core) and the screen has started to flicker regularly (its a problem that has built-up over the six months I've owned it....) I'm going to take it for repair, but was wondering whether the Core 2 Duo Macbooks have the same problem... if not, I might consider e-baying mine and geting a new one...
Any responses much appreciated.
Steve.

From what I've heard... Apple corrected all those problems the first generation Macbooks had in the C2D model. Even though no computer will be perfect, these are a good improvement.
You're much more likely to get a "good" macbook, I think. It's a great purchase (though you may want to wait till after macworld), enjoy it when you get it!

Has anyone got the 850 4010 I/B EDI file processed & translated via B2B?

Has anyone successfully translated an inbound EDI 850 4010 file via B2B?
We are using 11.1.1.4 weblogic, B2B Document Editor 6.6.0.2801
Eventually, it needs to be integrated to SOA
For us, it is failing on the console with B2B-50037: B2B inbound message processing error & SOA diagnostic log has the following errors:
oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/Seeded_850_4010.ecs
B2B-50025: Repository error at oracle.tip.b2b.mds.QueryManager.getBlob(QueryManager.java:2904)

Seems your B2B repository has got corrupted. You are using older version of B2B Document Editor but it will not cause this issue.
Take an export of your B2B repository, purge the design time repository and re-import it again. Deploy the agreement and test again.
Regards,
Anuj

Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

Hi,
Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
I have installed the 32bit version of the agent as my web site must support 32 bit applications.
I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
Thanks in advance,
Tommy.

I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
Thanks

Has anyone got the QTP "Siebel Test Optimizer/Express API" workng?

Hi,
We are trying to demo the "test optimizer" (earlier called "test express") capability of synchronizing the siebel repository with the QTP object repository.
We have tried installing the EAR files given by Oracle on both JBoss and Weblogic servers but keep getting an error "database name lookup failed" when trying to connect QTP to Siebel via the test optimizer wizard.
Siebel version is 8.0
Please let us know if anyone has managed to get this working and detailed steps / any error encountered and their resolution!
Regards,
Hemant

Hi,
I know it's a little too late to reply to this thread but wanted to know if you were able to figure out the problem. If not, please reply back and I think I will be able to help you out.
Regards,
Rahul

Has anyone got the linux driver installed on Fedora Core

Hi I've read a heap on the forum about the linux beta driver and the horror people seem to have to install it. I have no idea what I need to do to recompile a copy of the kernel so I am hoping there's someone with Fedora Core 7 that has got this driver to install that would be willing to help me out with it.
All help would be appreciated
Thanks.

Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
Short version of the fix:
1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
2. Save the edid.bin file in /etc/X11 (or wherever you like)
3. Include the following in the device section of your xorg.conf:
"Option" "ConnectedMonitor" "DFP-0"
"Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
Fire up X and you're good to go.

Has anyone got the screen flick problem solved?

Similar Messages

Maybe you are looking for