Has anyone got UCM 11g running on Windows 7 64bit?

Hi,
I've just installed UCM 11g on a 64bit Windows 7. During installation I had some issues concerning the user rights, but now almost everything works fine.
Except of two issues:
1. when starting the UCM (startManagedWebLogic.cmd) I get the following exception:
!csNativeOsUtilsError!syNativeOsUtilsNotLoaded!syJavaExceptionWrapper,java.lang.UnsatisfiedLinkError: intradoc.common.NativeOsUtilsBase.getNativeVersion()Ljava/lang/String;
java.lang.AssertionError: !syNativeOsUtilsNotLoaded
     at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:386)
     at intradoc.common.NativeOsUtilsBase.<init>(NativeOsUtilsBase.java:352)
     at intradoc.common.NativeOsUtils.<init>(NativeOsUtils.java:26)
But the server is running.
2. Fulltext-Search doesn't work.
Message in the UI:
!csUserEventMessage,weblogic,localhost:16200!$!csSearchUnableToReturnResults
intradoc.common.ServiceException: !csSearchUnableToReturnResults
at intradoc.server.SearchManager.retrieveSearchInfo(SearchManager.java:269)
at intradoc.server.SearchService.retrieveSearchInfo(SearchService.java:1811)
at intradoc.server.SearchService.doLocalSearch(SearchService.java:1360)
at intradoc.server.SearchService.getSearchResults(SearchService.java:654)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
As UCM is not certified for Windows 7 I'm not sure if this is a configuration issue or a generel problem with Windows 7.
Has anyone got this installation run on Windows 7 (64bit)?
bye Stephan...

Assuming that you want to install the 64 bit UCM 11g version:
Issue with installer closing screen could be related with JAVA_HOME variable or wrong java version.
1. Check if 64 bit JDK (not JRE) is installed in a directory without spaces (not default Program Files… but something like C:\Java\).
2. Check if windows environment variable JAVA_HOME exists and is pointing to JDK directory (like C:\Java\jdk1.6.0_24)
3. Open command prompt and check java version with: java –version. It should return “Java HotSpot 64-Bit Server”.
A little bit more deatils here: Re: Installation issues with WebCenter UCM 11g
Regards,
Boris

Similar Messages

Has ANYONE got dbassist to run in Slackware 7?

I need to get Oracle 8.1.5i or 8.1.6.1i running in a Slackware 7 environment. It consistantly crashes with a java NumberFormatException error.
Does anyone know what in Slackware causes this to happen, and know what the fix is? I know that I can use scripts, this isn't the point. I need to get dbassist running.
Any help would be greatly appreciated.
Kurt Fitzner

Add a link
ln -sf /usr/bin/free /bin/free
see if it helps.
BTW, this was posted earlier for O8i 815.

Has anyone got experience of Windows 10 please ?

Hi,
Aplogies if this is the wrong board, I could not find a better one. I'm sure a CL will move it if it is.
I tried a search for "Windows 10" and all it returned was a post about NetProtect.
Has anyone got experience of Windows 10 please ? Is it better or worse than Windows 7, 8 or 8.1 ?
Best regards,
dfenceman

gg30340 wrote:
As the "free" upgrade option is available for a year after the launch of Windows 10, I would advise against being an early adopter. There will be the inevitable initial problems that seem to happen to all new Windows operating systems so I would wait for a few months until any problems/glitches etc are ironed out before upgrading your system.
@barnpiece
and @gg30340
Wise comments, I think.
Upgrading to Vista from XP destroyed a very expensive, and powerful 3d graphics program of mine. It's going to cost another £400+ just to upgrade to the Windows 8 version.
It can be run, with considerable difficulty on Windows 7, in Windows compatibility mode.
For Windows 10, there are similar considerations.
There are posts on the Windows, or perhaps Internet Security websites, assuring us that all will be fixed on the day
Windows states that "most" programs compatible with Windows 7 or Windows 8.1, will be compatible with Windows 10.
Just wait for a while.

Has anyone got elisa running?

has anyone got elisa running?
i've installed now elisa for the 3-4 time in ~one year and it's still not running. at least i get now the shiny start menu, but when i choose video, music, etc entry and then a directory it simply does nothing and gives out tons of debug errors/messages. and yes, i ugraded to the latest plugins package. don't trust shiny things...
vlad
ps: ??? the youtube plugin seems to work ... no it doesn't: i get this strange error "Message: don't know how to handle video/x-h264". though i have _all_ gstreamer-{ugly,dirty,good,evil}-plugins installed.
elisa is made for the ubuntu people. should it then just simply work? hmm
Last edited by DonVla (2008-07-15 19:19:05)

wonder wrote:there are missing dependency: pil and python-pysqlite.
extra/python-pysqlite-legacy 1.0.1-4 [installed]
A Python DB-API 2.0 interface for the legacy SQLite 2
extra/python-pysqlite 2.3.5-1 [installed]
A Python DB-API 2.0 interface for the SQLite embedded relational database engine
extra/pil 1.1.6-4 [installed]
Python imaging library
all installed....
btw: i don't get the packaging policy for elisa: why is there elisa and elisa-plugins? and why is elisa a dep for elisa-plugins and not the other way round? the install file says: "PLEASE NOTE: elisa-plugins package is needed at elisa to work". hence it's a dependency...
Last edited by DonVla (2008-07-15 19:24:55)

Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

Has anyone got iFS working in Tomcat ?

iFS 1.1.9
We have a urgent need to get iFS running in a Servlet 2.2 container and OC4J does not support iFS yet. I know this is not supported but has anyone got iFS working in Tomcat ? If so, pls do me a BIG favour by letting me have your config files, such as
- server.xml
- <tomcat home>\conf\web.xml
- web.xml for the tomcat context)
- wrapper.properties (if you are using tomcat as an NT service)
- tomcat-apache.conf (or equivalent)
- <oracle home>/apache/apache/conf/httd.conf
- A listing of relevant environment variables (by doing a "set>env.lis" or similar)
- and any other files you might think is relevant
Thanks a million in advance.
null

iFS 1.1.9 / Oracle 8.1.7 / Tomcat 4.0.1 / Windows 2000
After several hours of fiddling around with the configuration
files, I finally got the iFS up and running on my test machine.
Briefly here's what I did:
1) create application directories
<tomcat_home>/ifs/files/WEB-INF/classes
<tomcat_home>/ifs/files/WEB-INF/lib
2) Add the following to <tomcat_home>/conf/server.xml:
<Context path="/ifs/files" docBase="ifs/files"
debug="0" reloadable="true">

<Environment name="ORACLE_HOME" type="java.lang.String"
value="oracle_home"/>
<Environment name="ORACLE_SID" type="java.lang.String"
value="sid"/>
<Environment name="LD_LIBRARY_PATH" type="java.lang.String"
value="oracle_home/lib:oracle_home/ctx/lib"/>
<Environment name="NLS_LANG" type="java.lang.String"
value=".UTF8"/>
</Context>
Please replace oracle_home with your installation directory and
fill in your SID as well.
3) create <tomcat_home>/<tomcat_home>/ifs/files/WEB-INF/web.xml
with the following definitions:
<servlet>
<servlet-name>oracle-jsp</servlet-name>
<servlet-class>oracle.jsp.JspServlet</servlet-class>
<init-param>
<param-name>logVerbosityLevel</param-name>
<param-value>WARNING</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>oracle-ifs-servlet</servlet-name>
<servlet-
class>oracle.ifs.protocols.dav.impl.IfsDavServlet</servlet-class>
<init-param>
<param-name>classpath</param-name>

<param-value>
tomcat_home/webapps/ifs/files/WEB-INF/lib/ojsp.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/webui.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/adk.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/http.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/repos.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/email.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/release.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/utils.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/settings.jar;
tomcat_home/webapps/ifs/files/WEB-INF/classes;
tomcat_home/lib/xmlparserv2.jar;
tomcat_home/lib/classes12.jar;
tomcat_home/common/lib/servlet.jar;
</param-value>
</init-param>
<init-param>
<param-name>ifs.dav.servicepassword</param-name>
<param-value>manager</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>page_provider</param-name>
<param-
value>oracle.ifs.protocols.dav.impl.jsp.IfsJspResourceProvider</p
aram-value>
</init-param>
<init-param>
<param-name>page_repository_root</param-name>
<param-value>ifs_home/ifsjsps</param-value>
</init-param>
<init-param>
<param-name>unsafe_reload</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>oracle-ifs-servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>oracle-jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
tomcat_home and ifs_home must be replaced with your installation
directories.
4) Copy the iFS and Oracle JARs to the locations specified in
web.xml
You may choose either the applications lib directory or the more
general tomcat_home/lib for that purpose.
One hint on libraries: Tomcat will ignore ZIP files, you have to
use JAR. I renamed Oracle's classes12.zip to classes12.jar for
that reason.
5) Create settings.jar
This was the most tricky part. I packed everything under
ifs_home/settings into the file settings.zip, renamed this to
settings.jar and moved it to the WEB-INF/lib directory. Seems a
bit of a kludge to me, anyone with a better solution is welcome.
6) Start tomcat
7) try http://yourtomcathost:8080/ifs/files/index.html
You should see the ifs login screen then.
One word about the application environment. In this
configuration every user class has to go into
<tomcat_home>/ifs/files/WEB-INF/classes, the
ifs_home/user_classes is of no use here. And don't try to set
the classpath within catalina.bat, tomcat will completely ignore
this setting.
Finally, I know that this environment is not supported but as
long as the iFS servlet meets the standards, every standard
compliant servlet engine should do the job.
Good luck

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has ANYONE got a 'faulty' superdrive to work without replacing it?

There are many tales of people here with dodgy sauperdrives. Now I have one in a 2 year old eMac. So before I spend money replacing the superdrive, has anyone got their's going by way of software or cleaning or dancing around their Mac chanting to the sky?
Steve

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

Has anyone got PPTP VPN to work on Lion Server?

Has anyone got PPTP VPN to work on Lion Server?
I had a go with the terminal commnds posted by apple support but no joy. Since then Apple has pulled the suport article - is it because it didn't work?
I get PPTP is less secure but PPTP seems to be more reliable don't know whey they can't keep as GUI. I've got them both running on our 10.4 server and L2TP stoped allowing connections for no reason PPTP was still working L2TP started working again on its own. Plus L2TP drops my connection when I connect with a 2nd device e.g connected with my Macbook connect with my iPhone (different username) it drops my Macbook.
Any advice getting PPTP to work on Lion Server would be appreciated
Thanks
Ben

Hi,
I have posted a bugreport on this issue to Apple. Currently (10.7.2) it is not possible to run PPTP on any Mac OS X Server when using a 10.7 Server as Directory Server.
I have tried 'everything', but the MPPE encryption mechanism seems to be broken.
Edit: I see now that the bugreport is filed as a duplicate to an older case, which is now closed. I hope this means they have found the problem and will release a fix in the next update.

Has anyone got NVrotate to work under Win98SE?

I installed the latest driver for this card for Win98
NVrotate is not available as an option in Win98SE
Display properties-->settings -->GeForce FX5200
I temporarily moved a drive with WinXP Pro onto this machine.
NVrotate is an available option in
Display properties-->settings -->GeForce FX5200
and works fine.
But for various compatibility reasons this machine has to been running Win98SE.
Has ANYONE got NVrotate to work under Win98 ??????
MSI FX5200 TD128
Gigabyte GA-7VAX
AMD 2400+
17" Analog LCD & 18.1" Analog LCD

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got the Lion Server wiki to work?

I can get the Lion Server wiki to work on the default website, but cannot figure out how to get it to work on an additional website I have created in the Server app. Has anyone got this to work? If so, how do you do it? I imagine it has something to do with an alias or something in one of the conf files in /etc/apache2/sites, but cannot get past this. Thank you in advance for any guidance.

I finally relented and just put all of my website files in the /Library/Server/Web/Data/Sites/Default directory and got my wiki running off of my website properly at www.mydomainname.com/wiki. I am still looking for a way for having this wiki to run off of a website that is not stored in the Default directory if someone knows how to do that. It would also be nice to have several wikis served up (one per website, or even several per website) by the wiki server in the same way that more than one website can be served up by the web server. Anyway, the problem is solved for now.

Has anyone got a Sony EX3 to work in this program?

Has anyone got a Sony EX3 to work in this program?

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

I have downloaded a movie in iTunes which will play in iTunes but it has has no audio. Has anyone got an idea what to do because all the audio is on & working in other applications.

I have downloaded a movie in iTunes which will play in iTunes but it has has no audio. Has anyone got an idea what to do because all the audio is on & working in other applications.

Hi there Fijiforme,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows XP: Troubleshooting video playback
http://support.apple.com/kb/TS1386
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
-Griff W.

Has anyone got UCM 11g running on Windows 7 64bit?

Similar Messages

Maybe you are looking for