Has anyone gotten a missing file error when installing 10.5 on windows 7

I have tried to install iTunes 10.5 on my windows 7 64 bit laptop and keep getting a "missing file error" but it doesn't say what file is missing and I haven't been able to find any info to help resolve the issue. Any help would be appreciated!

Ok, if you get this message I've read a bit further and found that you must uninstal everything that has something to do with apple. this includes the device driver. this link may help you with that. http://support.apple.com/kb/ht1925 Once I went through the list and deleted everything (device support is a *****). I installed it again and it came up with the same error. I then clicked ok and it rolled back but automatically started installing again and it worked. I know have itunes 10.5. but know my iphone 4 wont connect to it, lol. it says i have to reinstal because the driver didn't take or something. I really want the OS update for my phone but gd this is a bit much.

Similar Messages

Missing file error when installing SAP Front End

When installing SAP front end, i am receiving following file missing error, please assist:
I am using Windows XP Professional
The SAP Front-End Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
Click Finish to exit the wizard.
The following program files are missing on the installation source:
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\filc\odbc\mscreate.dir
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotgr.gid
c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotuk.gid
The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://C:\SAPEXP1\Others\SAPGUI1\GUI\WINDOWS\WIN32\setup\saplogvw.exe .

Hi Anand,
I would not care about those files, because they are unneccessary. mscreate.dir is a 0 byte file which just tells that microsoft has created this directory. The *.gid files are winhelp files that get created when you first use the help function.
Regards,
Pascal

CRC missing file error when installing windows

When trying to instal windows on my Mac Pro desktop I keep getting the same error message. I must have tried it 6 times and always get the same message whether I am trying to my main disk partitioned, or to my secondary disk. It tells me to check my disk and I have, and cleaned it, plus I have ued the same disk to instal windows on my laptop Mac Pro without problems.
The message follows...
Error:
SXS.dll: syntax error in manifest or policy file "f:\i386\asms\6000\msft\windows\common\controls\controls.man" on line 4
xxx
error:
installation failed f:\i386\asms. Error message: Data error (cycle redundancy check)
xxx
fatal error:
one of the components that windows needs to continue setup could not be installed.
Data error (cycle redundancy check)
If you are installing from a CD there might be a problem with the disk; try cleaning the disk or using another disk.
Please help!
Doug

It should be "Cyclic Redundancy Check" I believe. If I were you I would check the disc for scratches...etc., and even if you can't detect any that are very visible, it would still be a good idea to go out and purchase some stuff designed for fixing scratches/blemishes on CD's so you can use them again. If that doesn't work, I'm at a loss.

Missing File error when trying to install HP 5610xi using Windows 7 64 bit download

I have tried several times to download and install the software and drivers for my old 5610xi on my new computer running Windows 7 Home Premium 64-bit OS. I keep getting a "missing file" message when trying to run the download, and it will not install. Can someone please help!?!?

Hi computeir, sorry to hear that you are having issues with getting your printer installed on to your computer. If you are connecting the printer to the computer with a usb cable, please remove it from the printer and the computer and set it aside. Please click the link I have provided for the HP Printer Install Wizard for Windows.
The installation will prompt you as to when to connect the usb cable. If you are still having issues, please feel free to write back.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Missing file error when downloading cs6

I bought cs6 and downloaded it fine on my laptop. Bought a new computer and tried to download it here but it just says installer failed to initialize. This could be due to a missing file. Please download adobe support advisor to detect the problem. I clicked the link but it says it's been discontinued. I deleted all adobe files off of my computer, used the adobe file cleaner and restarted only to get the same error. Please help! I am running the windows 8.1 pro software.

uninstall anything cs6 that's installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.

[SOLVED] mkdir: missing operand error when installing Arch

I am on my first attempt of installing Arch Linux and when i type the command /arch/setup i get the following error
Welcome to Arch Linux Installation Framework
/usr/lib/libui.sh: line 120: /usr/bin/dirname: Input/output error
mkdir: missing operand
Try 'mkdir --help' for more information.
ERROR: Cannot create log directory
I am attempting to install from an ISO cd i burned.
I am extremely new to this and searched the Installation section of the forum with no luck. Thanks for any help.
Last edited by gnuub (2011-05-18 03:30:07)

I am using the 2010.05-core image. I tried installing on a different machine and it worked. I swapped the harddrive and it worked this time, but i received the following error before the arch boot screen came up.
Buffer I/O error on device sr0, logical block 82944
I must have missed this error the first time by not paying attention, because the process continues after repeating the error a few times.

Can't get past OCX error when installing ODAC 11g on Windows Server 2003

I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
Thanks!
Michael Young
Latitude Geographics
Victoria, BC

Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
So you say you checked instant client and you still got the error? That doesn't add up...
Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
You can do this as follows:
1) Under the download links on OTN, go to the database download page.
2) Download the Oracle Database client 11g for Microsoft Windows
3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
4) Close the installer
5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
Christian

Oiix.Spawn error when installing 9iAS EE on Windows 2000

I am performing a silent installation (with a response file) of
Oracle9iAS Enterprise Edition on Windows 2000 with 512 MB RAM.
At 59%, I get an error stating "This install was unsuccessful
because: oracle.sysman.oii.oiix.OiixSpawner. Would you like to
end this session now?" After looking at the InstallActions.log
file, the OUI is trying to spawn a command to invoke ORAINST (to
install the 806-based Discoverer). If I answer "No" to the
error dialog to continue with installation, I get the same error
every time the OUI tries to spawn a command, no matter the
command. I am able to copy the spawn command from
InstallActions.log to a command window and successfully run the
command manually.
Has anyone experience this before or have any ideas?
Thanks in advance.

Hi,
As per the technet article, I dont see Windows Server 2000 as a supported operating system to perform a P2v.
http://technet.microsoft.com/en-us/library/cc917954.aspx
Good luck !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

MaxDB error when installing J2EE engine on Windows

when installing a development Java instance with MAxDB on Windows, I get the following error:
ERROR 2006-05-19 07:27:17
MDB-07000 Execution of action DB_WARM failed.
WARNING 2006-05-19 07:27:17
The step Sapdb_db_dbstart with step key J2EE_Workplace|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDefault|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|J2EE_Engine_DB_INSTALL_internal|ind|ind|ind|ind|ind|0|Sapdb_db_dbstart was executed with status ERROR.
Can someone help?

Hello Kirk,
could you check the errors in the XCMDOUT.LOG file (in your installation-dir) and/or knldiag (and knldiag.err) file (in your SAPDB/MaxDB Rundirector(/sapdb/data/wrk/<SID>)?
The error information in those files should help to get clear on your problem.
Thank you and best regards, Natalia Khlopina

Cannot find device or file error when installing 6.1 from cd or from hard drive

installation error - LabVIEW 6.1 AUG 2000 - this is the only software I had a problem installing

Contact NI for support at ni.com/ask. You will need to provide extensive information about your system.

Error when install Oracle Beehive on Windows

Hi All,
I try to install and configure Oracle Beehive 1.2.2 on Win Server 2003 EE sp1 against Oracle 10.2.0.4 DB. The installation was succeed, but the configurations were failed in preparation phase.
This is the error message:
Launching tool "Oracle Beehive Product Preparation"
Invocation timestamp: 8:33:08 AM
Executing command: oracle.ocs.install.plugins.product.main.ClonePlugin ${enc_old_admin_passwd} ${enc_admin_passwd} ${obf_db_admin_passwd} D:\oracle\beehive 7780 6103 6203 6006 false Beehive_home_1 SeatechINS sys 192.168.1.6 1522 ito /var/opt/oracle/oraInst.loc
1 file(s) copied.
1 file(s) copied.
Tool "Oracle Beehive Product Preparation" returned Failed status.
=============================================================
Please help me on this.
Thanks and Regards,
Phong

Hi,
I would not to give the impression to make a standart answer but 10.2.0.4 is not yet certified to be used with Beehive. - Only 10.2.0.3 - Even is alot of patch we have to install on top of the 10.2.0.3 are included on 10.2.0.4 all are not there.
As well when you specified your password
- for the db you need at least one number
- for Beehive Beedadmin account you need at least on uppercase character and one number
Hope that help,
Frederic Daurelle

ACL Error when install Oracle 10G on Windows XP

I tried to install Oracle 10G Personal Edition on my Windows XP box. I see the following error in the log file:
INFO: Calling Action w32OcxRegActions10.2.0.0.0 RegisterOCX
OcxPath = C:\oracle\product\10.2.0\db_1\oraconfig\oraconfigps10.dll
WorkingDir = C:\oracle\product\10.2.0\db_1\oraconfig
INFO: Calling Action SpawnActions10.1.0.2.0 Spawn
installcommand = "C:\oracle\product\10.2.0\db_1\oraconfig\ocfgperm" -aa {A1F205B4-4418-11D2-B2F1-00805FC19E2E} set ORA_DBA permit
deinstallcommand = null
WaitForCompletion = true
INFO:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: ERROR: Cannot add user to application access ACL.
No mapping between account names and security IDs was done.(534)
INFO: End output from spawned process.
In addition if I try to create a DB later via command line or via the DB Config tool I get all these windows dialogs popping up saying: "Oracle SQL*PLUS has encountered a problem and needs to close. We are sorry for the inconvenience."
Any ideas what might be wrong with my installation?
David

Hi David,
i got the same error on a Windows 2003 Server. At this time no password was set for the Administraor account!.
After setting a password for the Administraor i could install the SW withaout any Problem!
Rudi

Error when installing itunes 10 on windows 7 64 bit

why do I keep n getting the error messages when i try and install itunes on windows 7 64 bit. But sometimes it will install but once it gets done it say that something is not install I need to uninstall and reinstall itunes..... is there something I need to do to get this to work....

HRESULT:0x800736FD
It's rarer to see these on Windows 7 than it is on Vista. Somtimes they're a bit easier to deal with on 7, too.
First, head to Windows Update and see if you can update the PC. If you can, and you collect updates without any errors, try another iTunes install.
If you get errors installing Windows Updates, double click on the failed updates in your Update history to bring up a small window containing alphanumeric codes for the erros. Are they also 800736FDs, or are you getting other error codes?

Error when installing IDES ECC6 on Windows 2008

Hi Experts,
I'm now trying to install IDES ECC6 SR2 on Windows 2008. However, I'm stuck at the very beginning of the installation - Oracle cannot be installed. I always get error which says something like program stopped due to exception, internal error ...
The JVM I'm using is jre 1.4.2-19.
Any suggestion?
Thanks a lot!!
Best,
Roger

Hi,
On windows server 2008, you cannot install oracle 10.2.0.1.0 and then patche that to 10.2.0.4.0. But u need to install the RDBMS 10.2.0.4.0 directly. This DB software is available in the oracle failsafe DVD.
Regd the JDK, it is better to go with JDK version 1.4.2.24 or 1.4.2.25.
BTW: I hope the OS u r using is not windows server 2008 R2(R2 is not yet supported by SAP)
Hope this clarifies.
Regards,
Varadharajan M

11.5.9 to 11.5.10 upgrade missing file error - adrelink exiting status 1

I am in the processing of upgrading our system from 11.5.9 to 11.5.10.2 on a Linux 4.5 system.
While applying patches 4337683 I ran into missing files which required me to apply patches 2214446 and 2284692. After going through the steps on both of those patches I am still getting a missing file error when it tries to relink ENCACN.
I am getting the following error:
$APPL_TOP/sht/11.5.0/lib/rwave/libstd8s.a: No such file or directory
I have searched for anything referencing this particular file and can find nothing on the web. I also noticed that I have no rwave directory and I have also searched the whole partition and that file does not exist. I must be missing another patch that I can not find.
Can someone point me to the missing patch?
Thanks
Tim
Edited by: user12055581 on Nov 5, 2009 12:45 PM

Thanks for your help, that document worked great.
I have since experienced another issue now that is resolved. This issue is almost identical to an issue I started with originally.
When relinking ENCACN
a couple messages about "more undefined refereces to '__pure_virtual' follow'
/usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libgcc_.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
I had originally gotten an error about GLIBC_2.2.4 that was corrected by
mv gcc gcc344
mv g++ g++344
ln -s gcc32 gcc
ln -s g++32 g++
in /usr/bin
My searches on this error seem to point to the same solution to fix this but it has been done. Is it perhaps a version problem the gcc344 and gcc32 were what I pulled from the website, are those based off of versions installed so they should be something different for my system?
Thanks again for the help
Edited by: user12055581 on Nov 6, 2009 12:14 PM

Has anyone gotten a missing file error when installing 10.5 on windows 7

Similar Messages

Maybe you are looking for