Has Anyone gotten the HP USB Tunner (KS523AA) to work on a Sandy Bridge Laptop (DV7-4290us)

Just Wondering what the heck the deal is.  I have two older DV7s that do work with their TV Tuner But this new one is driving me nuts.  I also noticed that it appears HP has changed MediaSmart in that on the two older laptops the module/program that is used to watch/record live TV is called MediaSmart Live TV.  On this new laptop the Module appears to be MediaSmart Movies and TV.  So I was also wondering if anyone with a Windows 7 Home Premium has gotten the MediaSmart Movies and TV program to work with the KS523AA tuner.
Since this is one of the Sandy Bridge laptops (with the Intel Chip problem I may end up returning the entire laptop) so has anyone gotten the KS523AA working on either a DV7-4280us or an Envy 17-1190NR
Thank You

Hi Beechwood54,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY m6 Notebook and the headset not working correctly. Here is a link to resolving microphone issues with Windows 8.1. You have the option to do a system restore to when the product was working correctly.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Has anyone gotten the Digi 002 to work on Mavericks?

    Has anyone gotten the Digi 002 rack to work on OSX Mavericks?
    I know it says '002 rack and console are not supported (untested)' according to Avid's site, but I was curious if anyone has got it to run.
    I am currently using Logic Pro 9 with it right now under OSX 10.8.5, but would like to upgrade my OS. (Logic Pro X is out until I can find a reliable 32 bit bridge for all of my plugs.)
    Thnaks in advance.

    the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
    heere is the note they sent - but some of the urls dont resolve
    Jaff said:
    If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
    http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
    Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
    http://www.whatismyip.com/
    Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
    http://portforward.com/english/applications/port_forwarding/Splasht...

  • Has anyone gotten the new 640x480 videos to work?

    Has anyone gotten the new videos to transfer to their ipod? Mine keeps saying that they are not supported by ipod. Also does anyone know what bitrate for video is now supported?

    On Tuesday I updated my 8 month old video iPod with 1.2. This morning I successfully transferred Mulan I downloaded off iTunes and played it out to a normal TV. I did not see any compression artifacts that I would normally see from the previously downloaded TV shows such as Battlestar Galactica. This probably means that it has the more updated resolution.
    Core Duo Mini   Mac OS X (10.4.7)  

  • Has anyone got the QT stand alone installer to work?

    OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
    You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
    and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
    Mark

    I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

  • Has Anyone gotten the Intelligent Agent to work???

    I have Oracle installed and all is well except for a few minor
    problems that I think the Intelligent Agent will solve. Has
    anyone gotten this to work on RedHat 6.0 with Oracle
    Enterprise Edition 8.0.5.1??? I was able to get it to work
    under Oracle8 SE, but I need EE for the ConText Cartridge.
    I have gotten to the point where I can get the dbsnmp process
    running, but OEM cannot talk to it.
    Please help
    --Bryan
    null

    I'm having the same problem. Does anyone out there have a
    solution?
    I am running RedHat Linux 6.0 straight out of the box. The only
    change I made was to set the kernel parameters according to the
    release notes and recompile the kernel.
    P.S. Oracle deserves our thanks for providing free developer
    licenses to so many of its products, but this is the buggiest
    install I've ever seen in my 12 years of working with their
    products. Didn't anyone from Oracle test the install? This
    problem and the zero length libnjni8.so file are the real
    doozies.
    I've followed the release notes and installation guide to the
    letter and have found several documentation / distribution bugs
    that should have leapt out at the first person who tried it.
    Thorsten Khnemann (guest) wrote:
    : Bryan Batchelder (guest) wrote:
    : : anyone else who could not get it to compile with TCL 7.5 to
    : : please at least let me know other people are having the same
    : : problem.
    : Same problem here, the
    : "gmake -f ins_oemagent.mk agent" gives the message
    : "gcc: unrecognized option
    : `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
    : of unresolved references.
    : Tested on RedHat 6.0, egcs 1.1.2
    null

  • Has anyone gotten the automatic upload to YouTube to actually work?

    I've read about a lot of people who have had trouble getting Compressor's "Publish to YouTube" to work properly, but no stories of anyone actually getting it to do it. Has anyone gotten it to work? And if so, how?

    I have tried to get all of FCP's new social networking uploads to work, and they don't here. I just export the file, and use the Utube uploader. I don't think any of the sharing in FCS is ready for primetime:)

  • Has anyone gotten the new Iphone 5 yet

    Has anyone received the new Iphone 5 yet in the preorder?  I paid for mine on the prerder date and I still have no tracking number.

    Pat,
    Go to UPS website and clicl on "more options" under the tracking box.
    Then, click on "Track by reference"
    enterthe phone number Apple has on your account or enter your Apple order number but leave out the last two digits.  (Include the "W" at the beginning of the number)

  • Has anyone gotten the new update for windows phone 928

    Anyone gotten the new update for windows phone 928

    You don't have to wait, you can get it now.
    Get Windows Phone 8.1 now legitimately!

  • TS1286 Hello All, I am using a PC and have an iphone - has anyone gotten the error message when sync'g itunes Ox800000A?

    Hello All,
    I have lost the ability to connect to itunes to update software and apps etc., My PC is giving me an error message of Ox800000A - apple says it may be a USB port problem. Has anyone else received this error problem and if so did you fix it and how?
    The USB ports on my PC are working fine? Thanks in advance.

    Hi MarcusAH,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    http://support.apple.com/kb/ts3221?viewlocale=fr_fr#0xE800000a
    About unknown error 0xE800000a
    When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
    Windows XP
    Disconnect all iOS devices from your computer, and quit iTunes.
    Open My Computer from the Start menu.
    Choose Tools > Folder Options in the file browser window then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
    Click OK.
    Navigate to the following folder on your computer, noting that the drive letter can vary depending on which drive letter Windows starts from:
    C:\Documents and Settings\All Users\Application Data\Apple
    Move the Lockdown folder to the Recycle bin.
    Reconnect your iOS device and open iTunes.
    Windows Vista or Windows 7
    Disconnect all iOS devices from your computer, and quit iTunes.
    Open Computer from the Start menu.
    Choose Organize > Folder and search options. In the file browser window, then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
    Click OK.
    Navigate to the following folder on your computer:
    C:\ProgramData\Apple
    Move the Lockdown folder to the Recycle bin.
    Reconnect your iOS device and open iTunes.
    Hope this helps,
    Mario

  • Has Anyone gotten the message Security Status your computer is infected?

    I tried to open my email and a security status message came up. Unfortunately your computer is infected. Has anyone ever gotten this?

    I look at this site to know what the security threats are and how to be more secure. http://www.reedcorner.net/news.php?s=macdefender
    http://www.reedcorner.net/guides/macvirus/
    Be sure to check out the malware catalog here http://www.reedcorner.net/guides/macvirus/malware_catalog.php

  • Has anyone got the IIS Policy Agent 3.0 working with an ASP web application

    Hi,
    Can anyone pllease please confirm if they have managed to get the IIS Policy Agent 3.0 working for a asp/asp.net web site on IIS 7 running on Windows Server 2008 64 bit.?
    I have installed the 32bit version of the agent as my web site must support 32 bit applications.
    I have created a simple web site which works fine with the policy agent configured if the page is html, If I rename the html page to be of type asp I get an Object Move error.
    I would much appreciate if someone could confirm if they have managed to get an asp web site working with the policy agent.
    Note: The Policy Agent 2.2 worked perfectly with asp on IIS 6.0.
    Thanks in advance,
    Tommy.

    I managed to make Agent 3 work with IIS 7 for a sample application based on aspx in Dev environment .... after modifying the sample application, I got the same errors as "Object removed" and others .... I have no idea what the hell. Fortunately, a super .Net start here spent a few minutes to do some twicking on IIS, and make it work again .... don't ask me what he did, I am pretty dump, and no idea. :)
    Thanks

  • Has anyone gotten the FBUS PCMCIA card to work on a PCI to PCMCIA adapter board?

    I have lots of success with the PCMCIA card in laptop PCMCIA slots, but no luck with the PCMCIA card in a desktop PC with a Quatech PCD-B/PCI-E PCI adapter for PCMCIA boards.  I am thinking that my problem resides with the adapter board but I would like to know if anyone has had success with the FBUS series 2 PCMCIA card with a PCI to PCMCIA adapter.  I got a WinXP SP2 IBM ThinkCentre desktop.  Thanks

    We have ever used some PCMCIA to PCI adaptors, they are working properly with NI PCMCIA-FBUS card as well as NI-FBUS software.
    I'd like to recommend the single CardBus PCMCIA slot adaptor from Elan Digital System:
    http://www.elandigitalsystems.com/adapter/pci.php
    We have used the adaptor in a Dell Dimension desktop, running XP SP2, and NI-FBUS Configurator 3.1.1 runs well.
    Another adaptor is a long card, which is Gigabyte GA-MPCI, it works well with some old desktops, but the length of the card is about twice of the card of Elan Digital System; it might not fit your requirement.
    Hope it helps.

  • Has anyone gotten the error message after statement of error from Adobe:  Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

    Help!  Full error statement:
    Adobe Muse CC has encountered an error and will now exit.  Please report the last few actions you took leading up to this error to the Adobe Muse CC team.
    Mismatched begin and rollbackUserAction calls? (Import::import action to. generate page bitmap for CONTACT US)

    Please send us the .muse file and the MuseLog.txt file from your Documents folder to [email protected] Include a link to this thread for context. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (If you use a service, please include your return e-mail address in the body of the message, since not all services include it in the sharing invite they send.) Thanks.

  • Has anyone gotten the following error message when trying to do in-app purchases? Error purchasing from App Store, then underneith that ,Cannot connect to itunes Store (0)

    I'm getting an error message when trying to make in-app purchases.
    Error purchasing from App Store
    Cannot connect to itunes Store (0)
    I can purchase songs in itunes, but not the in-app purchase for Kingdoms at War. I've checked the parental controls and all the other obvious things in settings. Let me know if anyone knows how to correct this. Thanks.

    Here is an update and more information:  I actually have two MBP's.  One is a mid-2009 model and one is a new, mid-2012.  I transferred files from the mid-2009 to the mid-2012, but I use both computers frequently.  This problem only occurs on the mid-2009 and not on the mid-2012.  I have authorized both computers. 

  • Has anyone gotten the remote crawler to work?

    We are using UltraSearch 10g (9.0.4) and have not been able to index any data using the UltraSearch remote crawler. We have been able to crawl data successfully (rows in wk$url and wk$doc) but the data is not indexed (no rows in dr$wk$doc_path_idx$i).

    We have the exact same problem, Oralce support has been unable to resolve the problem. I suggest using another product.

Maybe you are looking for