Has anyone gotten their Hotmail account to work on iPhone?

I'm trying to use my hotmail address for my mail feature, but I don't know what the incoming/outgoing host names are supposed to be, and I don't know if I'm supposed to use IMAP, POP, or Exchange. Help, please!!
iPhone   Windows XP  

I looked into this some. Turns out that hotmail does not support pop3 and imap email clients. Reason being that the greedy corporate fools want you to access your inbox through a web client in order to spit advertisements at you. Thier is a non-comissoned program called Hotpop that you can run on your PC (must always he on and connected for this to work) but it is too much of a hassel of you ask me. Your best bet is to move over to gmail or yahoo mail that do provide these services (and a lot more storage space)
- Richard
Sent from my iPhone

Similar Messages

  • Has Anyone gotten the Intelligent Agent to work???

    I have Oracle installed and all is well except for a few minor
    problems that I think the Intelligent Agent will solve. Has
    anyone gotten this to work on RedHat 6.0 with Oracle
    Enterprise Edition 8.0.5.1??? I was able to get it to work
    under Oracle8 SE, but I need EE for the ConText Cartridge.
    I have gotten to the point where I can get the dbsnmp process
    running, but OEM cannot talk to it.
    Please help
    --Bryan
    null

    I'm having the same problem. Does anyone out there have a
    solution?
    I am running RedHat Linux 6.0 straight out of the box. The only
    change I made was to set the kernel parameters according to the
    release notes and recompile the kernel.
    P.S. Oracle deserves our thanks for providing free developer
    licenses to so many of its products, but this is the buggiest
    install I've ever seen in my 12 years of working with their
    products. Didn't anyone from Oracle test the install? This
    problem and the zero length libnjni8.so file are the real
    doozies.
    I've followed the release notes and installation guide to the
    letter and have found several documentation / distribution bugs
    that should have leapt out at the first person who tried it.
    Thorsten Khnemann (guest) wrote:
    : Bryan Batchelder (guest) wrote:
    : : anyone else who could not get it to compile with TCL 7.5 to
    : : please at least let me know other people are having the same
    : : problem.
    : Same problem here, the
    : "gmake -f ins_oemagent.mk agent" gives the message
    : "gcc: unrecognized option
    : `-R/home/oracle/run/product/8.1.5/lib/'" and hundreds
    : of unresolved references.
    : Tested on RedHat 6.0, egcs 1.1.2
    null

  • Has anyone gotten the Digi 002 to work on Mavericks?

    Has anyone gotten the Digi 002 rack to work on OSX Mavericks?
    I know it says '002 rack and console are not supported (untested)' according to Avid's site, but I was curious if anyone has got it to run.
    I am currently using Logic Pro 9 with it right now under OSX 10.8.5, but would like to upgrade my OS. (Logic Pro X is out until I can find a reliable 32 bit bridge for all of my plugs.)
    Thnaks in advance.

    the folks at Spashtop sent me a note indicating that its possible to get it to work remotely but they werent particularly clear as to how - especially with an aitport express
    heere is the note they sent - but some of the urls dont resolve
    Jaff said:
    If you are attempting to connect your home computer via 3g or outside network, you will need to get another external ip address and do 3 ports forwarding on router as this link described:
    http://support-remote.splashtop.com/entries/514213-how-do-i-connect...
    Please confirm your external ip address by visiting this site and put it on ipad profile for outside connection:
    http://www.whatismyip.com/
    Please check this link to find your home router for more specific help on ports forwarding:(just click top right corner to skip advertisement)
    http://portforward.com/english/applications/port_forwarding/Splasht...

  • TS3899 Hotmail account not working in iPhone 5 mail app

    At first I thought it was a COS, College of the Sequoias,  as in the college I'm going to,  Hotmail situation BUT  it turns out it's a Hotmail in general situation because my other Hotmail account doesn't show my inbox or sent mail at all. I sent up my Hotmail account properly, go to it on the mail app, click on it and the inbox is empty. So is the sent box. Go to hotmail on the browser..there's all my mail! Just not in my Hotmail account in the mail app! I tried to set  my Hotmail account on Jennifer's iPhone 4S.. No luck. Same thing happened when I tried on mum's iPad!
    The strange thing is my COS hotmail account WAS set up on their BEFORE then iOS6 update just flawlessly. I get my iPhone 5 and decide to delete my email accounts from the iPad now that I have my phone. When hotmail decided to go all wonky I tried resynchronize my COS hotmail on the iPad again because I know it worked there. But I had updated the software since then. Thus it not working now!
    My gmail and yahoo accounts  are working flawlessly on my mail app however the Hotmail..not so much! I've been doing some research on the net..could the update be the problem?? If so, I can't wait for the iOS 7 software update!

    Same here.  I, too, have tried everything, including removing and re-adding the Hotmail account and SMTP servers, rebooting, you name it.  Some folders seem to sync sometimes, but some do not ever.  The main inbox does not sync at all.  In addition, the problem seems to be strictly with Apple Mail on my iMac and MacBook Pro.  The issue does not occur on my iPhone 6 or iPad Mini.  I was very pleased with Apple Mail until now.

  • Has anyone gotten X Plane 10 to work on a MACBook Pro?

    I'm trying to get X Plane 10 running on Windows 7. The MacBook Pro is a 2012 purchase new. Has anyone succeded in accomplishing that?
    I read that the most common failures are with the graphics drivers. Tried to update NVIDIA's latest driver but it failed to load.
    I also read that Apple uses a costomized chip set and it only works witih mac drivers? Is this true.
    I know that X-Plane comes with a OS X version, but most of the add on's are in Windows. The specific add on was for a Cessna 208B. We are working with one of  the shipping companies to assess the pheasability of making the C208B a true robot.
    Thanks

    The 3D graphics on X-Plane 10 are very intense, you will need massive power.
    If you can find a copy of X-Plane 9, it will run fine on a MBP running an i7 duocore 2,and at least 4GB of ram.
    It works fine on mine.
    Also contact the X-Plane developers, as I have found them to be helpful in the past.
    http://www.x-plane.com/support/landing/

  • Has anyone gotten their monthly dukes???

    Hi,
    I love to give out dukes!! I wish i had more of 'em.
    So i have kept an eye on my account, waiting to see
    that "monthly" refresher.
    Is anyone getting their monthly dukes? Is this a practice they have stopped, but forgot to update their dukes bullitin board? Its like waiting for Christmas & Christmas never comes : (
    Maybe i've been a bad girl.

    gseel: i think you EARNED those duke dollars... i dont think my code was exactly easy to follow & i sincerely appreciated the help.
    Esoral: the link was good, but it seems there is something not quite right here... the BB regarding dukes says that once a month we get dukes... seems to me im not the onlyone who is missing a few dukes,among other things ; )
    I did write to the webMaster over a week ago... still no response other than "forwarded it to the appropriate person"...

  • Has anyone gotten OAM/WebLogic SSPI to work w/WebLogic Portal Server 9.2?

    Hi,
    I was wondering if anyone here has been able to get the WebLogic SSPI (10.1.4.0.1) working with WebLogic 9.2 (on Solaris 10)?
    I've gotten it installed, but when I switch from the default "myrealm" WebLogic realm to the "NetPointRealm", WebLogic will no longer start.
    After enabling security debugging in WebLogic, it appears that the user that I'm using with the startup is authenticating properly with OAM, but then that user is not getting the WebLogic "admin" role, which then causes the WebLogic boot to fail.
    I have the "admin" role in WebLogic mapped to the "Administrators" group OR the "BEA_Administrators" group, and in OAM, the user is a member of both groups, and in the WebLogic security debug, I can see that the groups are being returned, but the group names are somewhat strange (extra characters), and that may be why the role mapper may be failing (it returns "Anonymous" role).
    Jim

    Hello
    I am also facing problems with OAM 10.X to work with weblogic 9.2 on Solaris 10.
    Presently after instalation & initial configuation, when i enable Netpoint realm, server is not starting. But i can see weblogic boot user getting authenticated successfully in access server audit logs. After switching to debug mode - server startup throws error :
    <Throwing LoginException(NRE005 : Invalid member weblogic)>
    Can you please let me know how did you resolve your problem. It might give me a direction to debug.
    Thanks
    Sumit

  • Has Anyone Gotten their 12 Core Mac yet?2.66 or 2.93 tested Logic on it?

    Hey Guys, I'm one of those that still runs a ppc G5 with dual 2.5 and and SOOOO ready to upgrade, and I want the BIGGEST boy. though I've been reading that logic does not utilize all cores.. is that true? and approximately how much Power Gain will I enjoy if i'll be dropping 6+ K on a hardware unit? I aslo have a all the play instruments all spectrasonics, NI and So on, Im trying to wait and see all of them being tested with the new rig. I don't want to dicomision my studio for too long nor drop 6 g's just to find out none of the software works "just as of yet" for next half a year ...
    Help me out here please I need some guidance
    Thanks
    Paul

    Hey Paul, it doesn't look like anyone will be receiving their new machines before Aug 30th. so we all have to wait a little longer before we get benchmarks and reviews. If we look at "the present", Logic doesn't utilize more than 8 cores and reports have shown degraded performance with the 8 core "Nehalem" and Hyperthreading enabled (8 additional virtual cores). Granted, those results blow away my current Quad G5, it's still disappointing to those who spent so much money for a piece of hardware that can't be fully utilized. Who knows when Logic will effectively use more than 8 cores and what other bugs and "kinks" will have to be worked out? Also, we don't know if it will perform well with 6 cores, even with the hyper-threading disabled.
    I'm in the same boat as you, I'm ready to buy a new machine. But I'm not shelling out a dime until I see some real usage reports and reviews.
    If I were a betting man, I'd bet between September and October there's going to be a new version of Logic (probably 9.2) that utilizes more cores, probably at least 16. I imagine this because it would encourage more higher-end Mac Pro sales.

  • Has anyone gotten a Sony PS3 Controller Working?

    Hey,
    I've been reading that the PS3 controller works in Linux.  Unfortunately, I haven't had much luck.  I don't have much joystick experience (that sounds bad) and I'm just following the directions in the wiki article.  They don't seem to help here.  I modprobe usbhid, joydev, and analog.  I'm thinking analog is the wrong one to load.  There is, however, a /dev/input/js0.  lsusb returns something like this
    Bus 005 Device 006: ID 0781:7460 SanDisk Corp.
    Bus 005 Device 003: ID 054c:0174 Sony Corp.
    Bus 005 Device 002: ID 0bc2:3000 Seagate RSS LLC
    Bus 005 Device 001: ID 0000:0000
    Bus 004 Device 002: ID 054c:0268 Sony Corp.
    Bus 004 Device 001: ID 0000:0000
    Bus 003 Device 001: ID 0000:0000
    Bus 002 Device 001: ID 0000:0000
    Bus 001 Device 001: ID 0000:0000
    So I'm guessing it sees something.  At least I think it might; my computer is a sony product so maybe it sees something else.  So where I'm at, I try to play some game and see if it works... and it... doesn't.
    I did install the joystick package in the repositories.  I tried installing the joyutils in the AUR but returned errors about a version number (the package is supposedly out of date).
    Does anyone have experience with this?  Please let me know!

    Alright, I found that I need to put the controller into "operational mode" by "adding a  USBhid quirk" 
    http://git.kernel.org/?p=linux/kernel/g … 6a0391b964
    I recognize that people may not know anything about the PS3 controller but would you know how I might go about this?
    Last edited by eljoeb (2007-12-12 14:54:30)

  • Has anyone gotten the remote crawler to work?

    We are using UltraSearch 10g (9.0.4) and have not been able to index any data using the UltraSearch remote crawler. We have been able to crawl data successfully (rows in wk$url and wk$doc) but the data is not indexed (no rows in dr$wk$doc_path_idx$i).

    We have the exact same problem, Oralce support has been unable to resolve the problem. I suggest using another product.

  • Hotmail accounts not working on iPhone 6 - IOS 8.3?

    I've realised over the last few days that I've not been getting emails on my iPhone, they do still come through on my Mac.  I read a few threads that seem to put it down to the new IOS upgrade, but I can't remember when I upgraded to IOS 8.3 and when the emails stopped coming, but it does seem quite coincidental.
    I thought I delete the accounts on my iphone but it won't let me, it just keeps hanging with the screen showing deleting, but it doesn't delete.  I have to force a quit out of settings to get out of the screen.
    I also tried sending an email from each account to see if it would work but it also hangs on sending at the bottom of the screen.
    My iPhone 6 is only a few weeks old and I'm not sure what I'm meant to do now.  Why can I not delete the email accounts?  Why has my iPhone stopped sending and receiving them?
    Any help very much appreciated!

    HI, I would like to help you with this FaceTime issue. Can you expand on the problem please?

  • Anyone gotten their Aperture 2.0 serial number yet?

    I ordered it this morning but still haven't gotten it yet. They seemed a little confused about what I was asking about when I tried to call Apple. Has anyone gotten their serial number yet?
    (So far the upgrade looks good, just waiting to import the whole library and get started)

    just be patient, get a good night sleep and you'll probably get the serial tomorrow.. then its play time..
    just be off now, and make some photos! Aperture 2 tomorrow!

  • Has Anyone gotten the HP USB Tunner (KS523AA) to work on a Sandy Bridge Laptop (DV7-4290us)

    Just Wondering what the heck the deal is.  I have two older DV7s that do work with their TV Tuner But this new one is driving me nuts.  I also noticed that it appears HP has changed MediaSmart in that on the two older laptops the module/program that is used to watch/record live TV is called MediaSmart Live TV.  On this new laptop the Module appears to be MediaSmart Movies and TV.  So I was also wondering if anyone with a Windows 7 Home Premium has gotten the MediaSmart Movies and TV program to work with the KS523AA tuner.
    Since this is one of the Sandy Bridge laptops (with the Intel Chip problem I may end up returning the entire laptop) so has anyone gotten the KS523AA working on either a DV7-4280us or an Envy 17-1190NR
    Thank You

    Hi Beechwood54,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP ENVY m6 Notebook and the headset not working correctly. Here is a link to resolving microphone issues with Windows 8.1. You have the option to do a system restore to when the product was working correctly.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • [solved]Catalyst + xorg 1.6 = Has anyone gotten it to work?

    After going over the wiki for ATI and installing the catalyst+catalyst utils (9.4) from AUR using yaourt, the device refused to load. Now, I don't have the error on file as I'm not at home. But the question remains: Has anyone gotten this to work?
    (*) 4870 HD Radeon card
    (*) 9.4 driver + utils from yaurt/AUR (I didn't.. see official 9.4 drivers anyone on the ATI website, how did we get them?)
    (*) no xorg.conf used, just startx to automatically detect hardware. And it worked, attempting to use the catalyst-based driver, but only with red bars and blocks on top of the screen
    (*) xf86-video-ati and radeonhd both work fine, but obviously the 3d support isn't so hot, and I'm a huge gamer
    (*) latest xorg release from pacman -Syu
    (*) Yes, I know official support has ceased
    Thoughts? Shared ideas? What are we waiting for, ATI's new drivers or a patched fix? Got this working, anyone?
    edit: Yes, I've searched the forums. But there's too much scattered information and not enough to really focus on what seems to be the problem and how to resolve it
    Last edited by nocts (2009-04-17 21:34:40)

    Well, I have a hd 4850, but that's generally the same. Here is my xorg.conf:
    Section "ServerLayout"
    Identifier "Xorg Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    Option "AIGLX" "on"
    EndSection
    Section "Files"
    # Additional fonts: Locale, Gimp, TTF...
    # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
    # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
    # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc:unscaled"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/100dpi"
    FontPath "/usr/share/fonts/PEX"
    FontPath "/usr/share/fonts/cyrillic"
    FontPath "/usr/share/fonts/Type1"
    FontPath "/usr/share/fonts/ttf/western"
    FontPath "/usr/share/fonts/ttf/decoratives"
    FontPath "/usr/share/fonts/truetype"
    FontPath "/usr/share/fonts/truetype/openoffice"
    FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
    FontPath "/usr/share/fonts/latex-ttf-fonts"
    FontPath "/usr/share/fonts/defoma/CID"
    FontPath "/usr/share/fonts/defoma/TrueType"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "record"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AutoAddDevices" "True"
    Option "Xinerama" "off"
    Option "Composite" "off"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,cz,sk,hu"
    Option "XkbVariant" ",qwerty,qwerty,"
    Option "XkbOptions" "grp:shifts_toggle"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    Option "XAANoOffscreePixmaps" "on"
    Option "VideoOverlay" "off"
    Option "OpenGLOverlay" "off"
    Option "TexturedVideo" "on"
    Option "TexturedXrender" "on"
    Option "Textured2D" "on"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1680x1050"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "RENDER" "Enable"
    Option "DAMAGE" "Enable"
    Option "Composite" "Disable"
    EndSection
    don't forget to run 'aticonfig --initial --input=/etc/X11/xorg.conf ' as root after you update your driver or change sthing in xorg.conf
    BTW I use catalyst 9.4 from AUR with kernel 2.6.29 and xorg 1.6
    Hope it helps...

  • Has anyone gotten a message when trying to access their itunes that says this version of Itunes has not been correctly localized for this language. Please run the English version.

    Has anyone gotten a message when trying to access their itunes that says this version of Itunes has not been correctly localized for this language. Please run the English version

    Hello didomeda
    Check out the troubleshooting steps in the first article. If it is not resolved, then try and remove iTunes and its related software in the right order and then reinstall.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

Maybe you are looking for