Has anyone had a problem taking successful pictures of checks for a bank app using a Galaxy S5?

I had no problems with making phone deposits on my Galaxy Stratosphere or on my husband's Galaxy S4.  However, after at least 20 tries on my new Galaxy S5, I kept getting error messages from the bank app indicating that it couldn't read it, to make sure the corners were within the frame or to make sure the MICR code was within the frame.  Even though I was certain I met all those criteria, and had plenty of light, nothing worked.  I even tried an old check that had been previously deposited via a different phone to see if it would work, but I had the same issues.  Any advice?  Thanks.

According to BofA Mobile support, the camera on the GS5 is very sensitive to the lighting conditions. They suggested to try a lower lighting. And maybe try toggling the flash on or off. The App uses whatever settings you have set for the camera at that time. So if the flash is turned on for your camera, then the App will use the flash to take pictures as well. Basically you just have to play with the camera settings until the app reads the picture correctly.. Good Luck all!

Similar Messages

  • Has anyone had a problem with depositing a check with the app for Bank of America?

    Has anyone had a problem with depositing a check on a bank app?

    Is the check something like a payroll check where its digitally printed and all in text?, or is it a handwritten check?
    from my experience handwritten checks rarely work, myself and friends have always recieved an error stating the picture was to blurry no matter how many times we took a picture. From what i have read with others who have issues with depositing handwritten checks, some checks are deemed to blurry based on the handwriting, therefore the app wont accept the check, while other handwritten check will be accepted just fine, i hope this resolves your issue's and concerns

  • My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    My iPod is stuck on the startup screen, showing just the apple logo. Has anyone had this problem before? If yes, then how did you solve it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?

    Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'

    Restore from iCloud Backup
    1. Settings>General>Reset>Erase all content and settings
    2. Tap Erase
    3. You'll see Apple logo and progress bar
    4. Hello
    5. Slide to set up
    6. Set language
    7. Set country
    8. Choose Wi-Fi network; enter Wi-Fi password
    9. (a) Use Location Service (b) Don't Use Location Service
    10. Select option
    11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    12. Selected Restore from iCloud Backup
    13. Enter password for iCloud
    14. Agree to Terms and Conditions
    15. Setup Apple ID
    16. Select backup
    17. Restoring from iCloud
    18. Hello
    19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
    20. Continue
    21. Finish setting iCloud enter Password
    22. Updating iCloud settings
    23. Create a Passcode
    24. Welcome to iPad
    25. Get Started
    26. Restoring Apps and Media
    27. Enter Apple ID and Password
    28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
    29. Connect iPad to iTune to sync with computer
    30. Sync Music, Videos and Album Artwork

  • HT5654 after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions

    after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails.  when plugged in to sync with itunes, it remains 'stuck' at syncing  step 2 of 7 backing up.  has anyone had similar problems? any solutions?

    I had this problem.  I held down the power switch to power down completely.  Takes a few seconds.  Then use the power switch to turn on.  Might take a couple goes.
    Kirk

  • Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

    Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

    Hi AKE1919,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • When I try download new os 5.1.0 on my iPhone 4 I get this error message  "stopped (err = -3259)" after it has downloaded.  Has anyone had this problem and if so what is the fix.

    When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download.  I have tried 3 times, it takes about 8 min. to download the 790.7 MB file.  Has anyone had this problem and what is the fix?

    See "error -3259" here.

  • Error: Couldn't unmount disk -- when trying to verify/repair external hard drives.  Has anyone had this problem and solved it?

    I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long.  When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly.  I haven't unplugged it any of them.  When I try to run very/repair disk before they disappear I get the error in the subject line above.  Has anyone had this problem and if so how did you rectify it?

    The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
    Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • Has anyone had a problem installing PSE Elements 8.

    I have installed PSE Elements 8 from a new boxed CD onto a new Dell running Windows 7 Professional (64 Bit).
    PSE has loaded without any warnings and I get to the welcome screen OK. Organiser works fine but if I try and start Edit it just circles around back to the Edit prompt. I have tried getting in via Fix in Organiser which then advises Loading Elements workspace but then drops me back to menu.
    I have tried all the Tech Note suggestions but after hours of trying am still no further forward.
    I even downloaded and installed the trial version but I this performs in the same way.
    All suggestions welcome.  Thanks

    No luck.
    PE Editor does not open with Ctrl/Alt/Shift nothing...zilch
    Running PE Editor from this point using Open produces error message. PE Elements has stopped working - Close Program.
    Thanks anyway.
    Problem has now been escalated to senior tech team within Adobe.
    Date: Mon, 1 Mar 2010 02:47:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: Has anyone had a problem installing PSE Elements 8.
    The only other suggestion is try re-setting the Editor preferences as this often fixes conflicts. You will also be able to check that this part of the application installed correctly.
    Hold down the windows key to the left of Alt and press the letter E to launch Explorer
    In the left side pane click on Computer
    In the right pane double click on Program Files, then double click Adobe, then double click Photoshop Elements 8.0
    Use the right hand  scroll bar to move down the list of files and locate Photoshop Elements Editor With one hand holding down all three keys CtrlShiftAlt right click on the Editor file in the list and select open.
    You should see a pop up box with the words Delete Adobe Photoshop Elements Settings File?
    Click on Yes
    Close down Elements and re-open it in the normal way.
    Please let us know if that works.
    >

  • Has anyone had a problem centering labels from microsoft word 2007 using the hp photosmart 7510? my

    Has anyone had a problem with printing labels centered on HP Photosmart 7510 e-All in one?  My labels are printed from Word 2007 and appear on the screen to be centered, however when I print, they are too high on the label.  Also when printing an e-mail the bottom of the page where it lists your email name is cut off.  Please help!!

    Hi,
    I'd been having this problem for probably round 30 years on many printers. I bought a labels printer few years back but I don't print labels everyday now.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Has anyone had a problem with the letters literally rubbing off the keyboard?

    Has anyone had a problem with the letters actually disappearing from the keybord, like being gradually rubbed out? My macbook air had this problem one year after purchase. They fixed it for free. Now, a year later, I have the same prob. Apple doesnt want to know.
    I would be delighted with any suggestions, reactions etc. thanks in advance.

    I don't have to be doing anything or be anywhere near the computer.
    The machine feels warm but i don't know if thats normal or not.
    Imac, 20-inch,mid 2007
    Processor 2 GB  intel core 2 Duo
    Memory 2 GB 667 MHz DDR2 SDRAM
    Graphics ATI Radeon HD 2400 XT 128 MB
    Software OS X 10.8.2 (12C54)
    No third party extensions that Iknow of

  • Has anyone had a problem with MacAce?

    Has anyone had a problem with MacAce?   I normally pay them £8.39 per month for iWeb hosting - but last week my bank account got dented by £8.39 (twice) and then a further £58.80 from nowhere- that's over £65 in unauthorised debits from my bank account.   No explanation - nothing.
    I sent them 2 E-mails - and no response.   I phoned them - and got through to a voice machine ... and still no response.
    Is there anything going on here?  

    Something must have worked - just got an E-mail from MacAce saying they've seen the problem and are arranging a refund.

  • Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

    Not here;  updated three systems without issues.
    Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
    Russ

  • Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac?

    Has anyone had a problem with CS3 crashing after downloading OS 10.8.1 on a imac? 

    Peggy
    You are probably correct. I tried all different variations to test it. As long as I quit each document separately, i.e., red dot it, I seem to bring up only one document after that whether I click on the document itself or open it within pages. The same is true with numbers.
    Two more questions:
    1) can you turn off the "resume" feature? If so, how? I could not find a way to do it.
    2) why the "save a version" feature in pages? What happened to the old "save" and "save as" features?
    Thanks so much, you saved me a lot of frustration but I am still going to install MS Office for Mac.
    Daveben

  • Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out torrow.

    Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out tomorrow.

    Hi, one question & one suggestion...
    What possible things are connected at home but not at the store, inlude every cable, etc.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

Maybe you are looking for