Has anyone had a system freeze while using Connect?

My system froze today while I was trying to bring up a poll during a seminar.  Has anyone else had this experience and learned why it happens and/or good ways to deal with this problem?
Christine

Hi Christine,
Are you licensed or hosted? When it froze did you lose connectivity? You can tell if you did if the little green box in the upper right corner disappears. If so, contact support. We had issues with crashes and basically were running out of room on our Connect Servers.
Melissa

Similar Messages

  • Has anyone experienced a movie freezing while watching it?

    While watching a rental from iTunes, the movie has frozen w/ 36 mins left. How do I get it running again?

    Have you tried to give your iPad a reset? Hold down the sleep and home keys for about 20 seconds. If you see the silver apple it's rebooting.
    If the reset doesn't help you can try a restore. If that doesn't help then if your device is under warranty and it's deemed to be a manufacturer's defect they should replace it for free. If it's not under warranty then the out of warranty replacement cost starts at 219 for a mini, 249 for a 2 and 299 for iPad 3+ (and more depending on the  model)
    You'd need to make an appointment at your local apple store if you go for the replacement.

  • Has anyone had any issues getting iPad to connect to Apple tv following ios8 update?

    HI i was wondering if anyone has experienced any issues connecting their iPad to watch films through Apple tv following the iOS 8 update. Prior to downloading the update everything worked fine now my iPad isnt picking up the Apple TV device at all despiteairplay being shown as on and them both being connected to the same wifi network.

    I'm saying to wait a bit longer. If it were mine, I would want it to work in every aspect and fashion. I will ocassionaly have connection issues on mine, but only occasionally. I can usually resolve them on the spot.
    It sounds odd to me that it would start working with your home network all of suddent without making any changes. However, I've had similiar experiences with computers and electronic devices in general. Having trouble connecting to one particular network, other than at home, would be something that I could live with. Having trouble with many, I could not live with.
    How did you restore it last time? If you used itunes then try directly on the ipad. Do the opposite of what you did before.
    Be aware, this might put you back at square one again with the wifi issue at home.
    But if it were me, I would restore back to factory settings again, just to satisfy my own curiousity.
    How to restore
    Via itunes
    http://support.apple.com/kb/HT1414
    via device
    settings/general/reset/erase all content and settings

  • Macbook Pro 2.6ghz i7 2013 system freeze when using Premiere/AME CC 2014

    I have a Macbook Pro i7 2.6ghz form late 2013 and I have been experiencing some serious problems with my system freezing while using Premiere Pro and whilst rendering from AME.
    I am running the latest version of CC (8.1) on OSX 10.9.5.
    GFX card: NVIDIA GeForce GT 750M 2048 MB
    RAM: 16 GB 1600 MHz DDR3
    I have CUDA enabled, I need the performance boost so rendering previews of the CPU is not much of a option for me.
    I have experienced this problem since I started running Premiere on my laptop (3 months ago). If I am doing any GPU hungry processes within Premiere or AME the system will freeze, when it freezes nothing will respond and the screen stays frozen, I have to do a manual shut down.
    I went as far as replacing the whole laptop with Apple as they put it down to a faulty GFX card, the new one has the same problem which leads me to think that the problem is with how Premiere and AME work with the new Macbook Pro's.
    These crashes happen up to three times a day if I'm doing a full day of editing and I have to make sure I don't push the system to hard to avoid it, the crashes don't tend to happen when I am editing 5D footage but they are quite frequent when editing 4k GH4 footage. I am working off multiple hard drives with valuable data which are put at risk when the system crashes. I normally work on a 6 core Mac Pro but next week I'll be pushing my laptop pretty hard with a full week of editing and I'd love to avoid these crashes.
    If more info and specs are needed to identify the problem, I'll be happy to provide them.
    Cheers, Moja.
    ps.
    My system just crashed twice today, once while writing this message, I had a project open in Premiere but I wasn't even editing, its currently 30 degrees in Melbourne, one of the hottest days of the year yet, which leads me to believe that the heat is contributing to the GFX card or CPU overloading.

    mojareeves1 wrote:
    I forgot to add that I have also updated to the latest nvidia card driver.
    My music seems to keep playing when the crash occurs which suggests the hard drive and other components are still running fine, its just the GFX card that is crashing.
    The GFX card may be a red herring if it still crashes in software mode and with the internal card.  The fact that you have music playing, however, may be a clue.  Programs that can access your audio hardware (like Soundflower) at the same time as Pr have been known to conflict and cause crashes.  Turn off any background audio processes.  Check your system audio settings, as well as Pr's audio and audio hardware settings. If you can, change the source of Pr's Desktop Audio in Preferences>Audio Hardware.  Try changing the ASIO settings.
    The next (and most painful) step would be to work your way meticulously through this document:
    Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
    The "Re-create Adobe application preferences" step often helps a lot.
    Cheers,
    Jeff

  • When I plug in my ear pod, my 6th generation ipod will play for 60 sec then shut off. If i restart it will play for another 60 sec. Has anyone had this problem?

    Has anyone had this problem? With earbuds connected the ipod keeps turning itself off. I then have to turn it on and it will play for another 60 sec and shut off.
    Susanfrom pickering

    Make sure the plug is fully inserted into the iPod.  There will be a noticeable click, and you may need to push harder than expected.

  • Has anyone had trouble using Adobe Support on line?

    Has anyone had trouble using the Adobe support on line?  For two days, I have tried to use the support system which requires a phone call and being put on hold or a call back of up to one hour wait long.  Four or five times my call was dropped shortly after the agent began to work with me..  One female agent was unable to find my adobe Lightroom serial # registered, so threatened to drop the call.  My # was used a couple of days to download Lt. Rm 3.6.  I asked to speak with her manager, she put me on hold, and hung up the phone after 20 mintues.  I did get her name in case anyone from Adobe  is interested.  I tried again and again to get help, but each time it ended in a hang up.  Does any one know how to get to an agent who can really help?  I am beyond frustration. 

    Try asking your question here, instead. There are lots of people here with great expertise, even though we don't work for Adobe.
    Hal

  • Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Thanks for reminding to at least update the results thus far.
    Update 4:
    I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
    Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
    My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
    About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
    Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
    One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
    Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online)  and I suspect that is one of the main issues why it does not work correctly.
    So at this time, I have not found a working solution to this problem.

  • Have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    have an Adobe PRO 11 user converting a word Document to PDF using PDFMAKER and all of the numbering is disappearing from left column,.  Has anyone had this happen and if so what is the fix?

    Is it possible to post a sample page some place for us to try out (dropbox or acrobat.com)? Is your Acrobat updated? What version of WORD are you using?

  • My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion?

    My problem started when system preferences was unresponsive and would not force quit.  I tryed to restart and got the grey screen, but it never restarted.  I closed the lid and now the screen is blank.  Has anyone had a similar problem after Lion installation?

    No, as I have yet to be convinced on Lion.
    Did a permissions repair help from the install DVD?

  • Has anyone had a problem using e-tax?

    Has anyone had a problem using e-tax? If so, can it be fixed?

    Yes, I had a problem where I could not open an existing data file. And I have a solution. (I found on Whirlpool.)
    Do NOT click Yes to use an existing data file. Instead go to File in the Menu Bar and open an (the) existing file from last used list. Good luck! I hope the ATO can get these issues sorted. ETax for Mac has been a long time coming.

  • Has anyone had any experience with using 'MacKeeper'?

    Has anyone had any experience using 'MacKeeper'?

    I am afraid its worsen then THAT!!. I bought two licences from those fraud spammers, liftetime with "satisfaction or moneyback guarentee".
    Both my Imac and MacPro kept crashing after installing it. All the helpdesk from zeobit did for me was sending me mails i should re-install osx and mackeeper.
    When that didnt help, the gave in. I asked my money back, as in the guarentee. Thet denied flat out. "Sir this is not OUR software causing the problem, but OSX. Go there with your complained!"
    Alsoo there newsletter......i UNLISTED 9 times now and still i get 5-8 spam mails a week.
    It´s a fraud a company !!
    Swindlers!! Alsoo see :
    https://discussions.apple.com/thread/2786697?start=0&tstart=0

  • Has anyone had an email saying Adobe can't bill using current payment information.

    Has anyone had an email from Adobe saying they cannot bill using current payment information on the account? I haven't made any changes and they have been happily taking the monthly subscription for many months. There are no issues with my payment information and the bank cannot find an attempted transaction from Adobe. I'm out of the country at the moment and cannot call their 800 numbers. Is there a number (not the 800 type) that can be used by international callers?

    Hi hansawathie
    Payment was attempted on March 21st & 22nd but it wasn't authorized.  Could you possibly check this with your bank in case they're blocking the payment for any reason.
    We'll automatically attempt to take payment in 7 days or you can contact our Chat team: Manage your membership and payments | Creative Cloud
    Thanks
    Bev

  • Camera on iPhone4 doesn't work, when you use either the icon on the screen all you get the the shutter. I am unable take pictures. Has anyone had the same problem and are there any solutions?

    The camera on my iPhone 4 isn't working and hasn't for quite sometime. I have updated the phone to IOS 6 and it hasn't made any difference.
    When you use the icon that appears at the bottom of the screen or the camera icon on the main screen all you see is the camera shutter.I have tried to restore the camera and that hasn't made any difference. I have spoken to Apple support and they sent me a support site to check out, but there isn't any specific solution for my problem. Has anyone had a similar problem and is there a solution?

    Try:
    - Reset the iPhone. Nothing will be lost
    Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPhone.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • TS3694 My phone keeps freezing, the apple sign appears on the screen and then it freezes again and repeats itself.. has anyone had this before? it's also not letting me restore it from iTunes, it keeps coming up with error (9) or error (14).. help?

    My phone keeps freezing, the apple sign appears on the screen and then it freezes again and repeats itself.. has anyone had this before? if so, what is it? & it's also not letting me restore it from iTunes, it keeps coming up with error (9) or error (14).. help?

    Hi there Holly N,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    -Griff W. 

  • Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

    NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

    Hi,
    I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

Maybe you are looking for

  • Questionable graphics problem on Macbook Pro 13" in Age of Empires III, SOS

    Hey! I was playing Age of Empires III today. I set the settings so that I got between 30-40 fps in FRAPS. Everything was running smoothly accept one really annoying thing. Whenn I scroll over the map, the picture kinda lags, it stops and jumps. But t

  • Start Date Validation

    I've found that when you create a new OIM user using an account other than xelsysadm the system will validate the start date. I usually don't enter anything, but I got an error stating that it does not allow start dates prior to the current date. So

  • Clientgen classpath problem

    Hi there, I have a problem using clientgen to generate the client jar stuff for a web services client. In ant I put webservices.jar and weblogic.jar in my classpath (in the taskdef for clientgen) but the task can't find jax-rpc classes like javax.xml

  • 10.4.6 going back to 10.3.9

    I going to reformat my HD and was thinking about using Carbon Copy Cloner to make a copy of my HD and then using the Migration Assistant to migrate all my porgrams and settings over from my external to my new reformated machine. When I use CCC and th

  • Microphoto Registration/Upgra

    Hi, I purchased a Zen Michophoto a couple of weeks ago and I just have not been able to register it. The registration software that came in the CD just freezes up when I select a country/region and it does not come back to normal. So, I tried an onli