Has anyone had success connecting 3 monitors with a Matrox TripleHead2Go?

I have a Matrox TripleHead2Go Digital Edition external monitor box but have had no luck getting it to work with 3 monitors on Mountain Lion.
First I managed to get it to drive two monitors, except there seemed to be no way to split them into separate monitors, as claimed in the advertising.
Then I got a 3rd monitor and connected it to the box and reconfigured the software. That is when the problems started. For a short time, it displayed on all 3 but with very low resolution, 600x800. When I tried changing the resolution then it would only display on one monitor through Output 1. That is a much as I have managed. I tried many times trying different settings, each time waiting 5 minutes each time. I have uninstalled and re-installed several times, tried different combinations for monitors. Nothing helps.
So I am wondering whether just to give up and use it as a paperweight and assume only PCs can use multiple monitors?

Trying to use a THTG digital (DVI) with a 2014 MBP retina.
Although it isn't supposed to work it does, although the matrox configuration tool is very annoying, keeps rebooting the machine, and I ultimately failed to connect 3 devices.
It is happy run 2 pico projectors at 1280x720@60x2, no problem. Insists on them being in ports 1 and 3.
Trying to connect a 3rd normal sized projector via VGA, resolution changes to 1280x720@50 and the picos won't work with it. Keeps asking to reboot OSX and not setting the resolution asked 1280x720@60x3, keeps setting 50hz.
I have moved from using Ubuntu on a dell laptop to OSX, and I really miss the power of xrandr to configure from the command line. This was my bible for several years: http://www.brandon-harris.com/ubuntu/dualhead2go/triplehead2go/2011/02/01/matrox -dualhead2go-triplehead2go-on-ubuntu-with-ati-amd.html

Similar Messages

TS1398 Has anyone had WiFi connectivity issues with their iPhone 5 after accepting the latest IOS 8.0.2?

Has anyone had WiFi connectivity issues at home with their iPhone 5 after accepting the recent IOS 8.0.2 update?

Yes, despite being it an iPhone5 (8.0.2) attempting to connect to an Airport Express.
In my case the iPhone "connects" to Airport Express 2nd generation, but no Internet packages are available; Airport Utility shows the Airport Express as not connected to the Internet; but the iMac, MBP, Motorola phone, Samsung Smart TV and HP printer connect without any trouble.
The actual issue is the DHCP :
sometimes the iPhone gets none, and
when an address is assigned it just doesn't work,
even renewing the address won't work all the times,
switching off and on the WiFi won't work all the times neither,
going on Airplane mode, then back won't work all the times.
Solutions attempted and failed:
Reseting and reconfiguring Airport Express;
Reseting iPhone;
Switching off and on the iPhone;
Setup the DHCP renewal for every 5 days;
Meditation and stark visualisation;
Other possible patch not yet attempted : setting fixed IP addresses
All suggestions received resemble Windows' "Plug & Pray"
I gave up after reading several notes around the WWW complaining about it.
Last credible suggestion : wait for 8.0.3 or 8.1, whichever fixes the issue first.

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

For $149 they will do an out-of-warranty replacement.

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Has anyone had success using the player in a facebook newsfeed

I'd like to use the player as a previewer in a facebook newsfeed. Has anyone had success? Is there a recipe for this?
Thanks,
Leo

The Juniper VPN is a SSL-based VPN solution whereas the native client supports L2TP and PPTP only - in other words they're completely different beasts.
That said, you shouldn't have any issue connecting to the SSL-VPN. I do it almost daily. You may need to be running the latest (or at least, recent) software on the Juniper box, though - earlier versions of the Juniper software had problems.

Has anyone had problems connecting iPad mini to Jawbone speakers via Bluetooth?

Has anyone had problems connecting iPad mini to a Jawbone speaker system via Bluetooth?

What versions BT are involved? Is AVD2P suppoted on both?

Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

Hi,
I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Has anyone had success in getting Apple to correct Maps mistakes?

On multiple occasions I've submitted a correction using the function within Maps to report errors, but nothing is ever done. Has anyone ever had any success in getting Apple's attention and getting something fixed? Or is the submitting a correction feature just a black hole? I've had to tell friends with iPhones to always use Google Maps rather than Apple to navigate their way to my house because Maps has completely mislabeled the street outside my development. It sure would be nice if they had a human being you could call...

For users who's printer/scanner does not have a compatible driver from their manufacturer:
How do I scan or print with the driver from Apple Software Update?
Depending on your printer and the type of driver update, you might need to scan in a different way than you did before you installed Mountain Lion.
Scan from the Print & Scan window:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu (# ), and then click System Preferences .
Click Print & Scan (# ).
Click your printer in the left pane.
Click the Scan tab, and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.Figure 5: Show Details scanning screen# Image: Show Details scanning screen
Change any settings as necessary, and then click Scan .
NOTE:
Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
Hope this helps

Has anyone had the same problem with IOS 6 install and McAfee flagging certain IOS 6 install components as Malware?

I was using ITunes to install IOS 6 on my 64GB IPad 2 when McAfee on my IMac (Software OS X 10.8.1 (12B19)) reported that it had found Malware and had put the offending file into quarantine. The IOS 6 install process then tried to re-write the file. This happened with three seperate files that the IOS 6 install process was attempting to write, effectivley causing a stall in the process. The only way I could get the install process to complete was to go into the McAfee preferences and change quarantine to notify. The process then completed. Has anyone else come across this problem?

Hmmmm... That did not work. I did the full restore on the ipod touch (Losing that is the lesser of the two evils if I screwed it up) and before I resynced it, I unplugged it and tried to plug it into the wall adapter. But it would not charge. Plugged it back into the computer and it popped right up with the lightning bolt on the battery and began charging.
So I resynced it and at least all my stuff is still there. Not going to bother trying with my phone if it didn't work on the ipod touch.
I can assure you my 4s is out of warranty. I've had it for 2 years.

Has anyone had app update issues with iOS 8.1?

I'm running iOS 8.1 on a iPhone 6+. If I try to update an app from the app store without being logged in, it will hang the process and the update will fail.
Previously, with my iPhone 4 and iOS 7.1.2 the app store would ask me to log in when an app update was attempted without being logged in.
The work around until apple fixes this bug is to ensure you are logged in BEFORE attempting an app update. An honest techie at the local apple store admitted this is a bug (one of many) in iOS 8.1. Has anyone else had this issue with iOS 8.1

Nope, I'm able to update an app in iOS 8.1, even if I'm not first logged into the iTunes & App Store in Settings. It prompts me to update the app, then I sign in with my password.
Do you have Touch ID enabled for App Store or not?

NI PXIe-1620Q - has anyone had success writing device drivers for Fedora 15? I am trying to control a PXI-6509.

I am using Fedora-Core 15 with kernel, 2.6.43.8_1.fc15.i686. I am trying to use NI-KAL ver 2.1 which does not support my version. But it compiles, the nikal driver loads correctly. But after a rebboot it crashes.
Has anyone built any version of NI-KAL that will work with FC15? or via the DDK?

Hi p_borras,
Is there a specific error associated with the crash you are experiencing?
Thanks,
Daniel D.
National Instruments
Automated Test Software R&D

Has anyone had success with the VMWare adapter in 5.3.1?

We are trying to use the VMWare adapter to control the powerstate of our VMs.
Issues we are having specific to the adapter:
1. Tried passing a group variable in the Virtual Machines dropdown on the VMWare tab. The job launched, but didn't do anything, so we cancelled it.
2. We then tried to run a shutdown job on one of the VMs, but received the error: "Unable to launch task, because another task is already running on this VM "
3. The only way to get the job to run was to stop and start the adapter connection, which won't be possible in Prod.
4. We were able to run the shutdown job, and the VM shutdown, but the job stayed active until our job event to cancel after max runtime triggered.
5. We then tried running our Power Off job with the "skip if already in expected power state" flag set. The job ran anyway and completed abnormal. We are wanting to run this second step as we have seen instances where gracefully shutting down a VM doesn't work.
Are these issues that other folks have experienced?
Michelle

I worked with Cisco/Tidal to investigate the issues. We were able to "resync" Tidal and the ESX server by making sure no VM jobs were running in Tidal and disabling the connection. We waited 20 minutes and then enabled the connection. We waited until the connection went green and requested the powerstate and Tidal reflected the same state as VCenter. We are not receiving the 'task running' message any longer.
Michelle

Has anyone had success with Messaging Server 5.2 under Windows 2000 Server?

Just to be up front - we MUST use Windows 2000 - they're not giving me a choice to move to Solaris or Sun Hardware. Linux isn't even a choice, nor is WinNT. (I know, it's annoying).
I've managed to get Directory Server 5.1 to run under windows 2000 without active directory installed. I found that I needed to modify the ims_dssetup.pl script that comes with the Messaging Server 5.2 to reference the full path to my ldapsearch and ldapmodify executables. Apparently, this is a win2k specific problem, and is not necessary on WinNT. This made ims_dssetup.pl work and the install of Messaging Server 5.2 work on a windows 2000 machine.
However, at reboot, the job controller and dispatcher do not automatically start. When I try to start the services manually, I get "Error 1067: The Service terminiated unexpectedly".
Any ideas? I'm desperate here - they're gonna make us use exchange if I can't get >>something<< working. Even a 4.x version of messaging server will do.
Thanks

Well, I do understand that.
However, I've installed iMS 5.2 on win2k several times (I admit, w2k pro, not server), and i've never installed AD.
If you can get it installed and working for your default domain, but not for other domains, then most likely it has nothign to do with AD or AD domains. iMS idea of domains is very different from AD's idea of domains. We need to be very clear about such.
for iMS, you have to create additional domains through Delegated Admin, as either "Hosted Domains" or as "Vanity Domains". We do not suggest using "Vanity Domains", and support for such is deprecated.
Once you have created "Hosted Domains" through Delegated Admin, you can add users to those domains, and they should work, just fine.

TS2690 Has anyone had success with this in a domain environment?

I work for a school system, windows 7 64bit machines and there seems to be no fix. A reimage of the machine only fixes it for a short time.

I worked with Cisco/Tidal to investigate the issues. We were able to "resync" Tidal and the ESX server by making sure no VM jobs were running in Tidal and disabling the connection. We waited 20 minutes and then enabled the connection. We waited until the connection went green and requested the powerstate and Tidal reflected the same state as VCenter. We are not receiving the 'task running' message any longer.
Michelle

Has anyone had success with importing AVCHD Surround? Any Camera?

The title says it all.
Please give some details and thanks.
Barry

How to try that ? I am using Sony HDR-CX560V

Has anyone had success connecting 3 monitors with a Matrox TripleHead2Go?

Similar Messages

Maybe you are looking for