Has anyone had success using BookShare DAISY files on an iPad?

Any info on when the Read2Go app will be available for the iPad 2?

According to their webiste, it says "Coming Soon".  No one here would have any more info than that.
I suspect it's been submitted to Apple for approval.  Your best bet is to contact the developer.

Similar Messages

  • Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

    Thanks for reminding to at least update the results thus far.
    Update 4:
    I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
    Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
    My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
    About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
    Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
    One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
    Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online)  and I suspect that is one of the main issues why it does not work correctly.
    So at this time, I have not found a working solution to this problem.

  • Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

    NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

    Hi,
    I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Has anyone had success using the player in a facebook newsfeed

    I'd like to use the player as a previewer in a facebook newsfeed. Has anyone had success? Is there a recipe for this?
    Thanks,
       Leo

    The Juniper VPN is a SSL-based VPN solution whereas the native client supports L2TP and PPTP only - in other words they're completely different beasts.
    That said, you shouldn't have any issue connecting to the SSL-VPN. I do it almost daily. You may need to be running the latest (or at least, recent) software on the Juniper box, though - earlier versions of the Juniper software had problems.

  • Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

    Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

    Hi AKE1919,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

    Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

    For $149 they will do an out-of-warranty replacement.

  • Has anyone had trouble using Adobe Support on line?

    Has anyone had trouble using the Adobe support on line?  For two days, I have tried to use the support system which requires a phone call and being put on hold or a call back of up to one hour wait long.  Four or five times my call was dropped shortly after the agent began to work with me..  One female agent was unable to find my adobe Lightroom serial # registered, so threatened to drop the call.  My # was used a couple of days to download Lt. Rm 3.6.  I asked to speak with her manager, she put me on hold, and hung up the phone after 20 mintues.  I did get her name in case anyone from Adobe  is interested.  I tried again and again to get help, but each time it ended in a hang up.  Does any one know how to get to an agent who can really help?  I am beyond frustration. 

    Try asking your question here, instead. There are lots of people here with great expertise, even though we don't work for Adobe.
    Hal

  • I'm running AutoCAD LT 2012 on my powerbook. Has anyone had experience using AutoCAD after installing Mavericks?

    I'm running AutoCAD LT 2012 on my Macbook Pro. Has anyone had experience using AutoCAD after installing Mavericks?

    Autodesk just released an update for AutoCAD 2013: http://forums.autodesk.com/t5/AutoCAD-for-Mac/Autocad-2013-compatibility-with-Ma vericks/m-p/4561479
    I do not know if a similar one will be required for AutoCAD LT so be sure to check their website.

  • Has anyone had the problem of the sound on the iPad not working on anything but the music and videos?  The sound does not work on any of the apps.

    Has anyone had a problem of not getting sounds when using apps but you can still listen to music and hear videos?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Has anyone had any problems with the latest upgrade for iPad?

    I have an iPad 1 and am being prompted to upgrade to the latest version software. Has anyone had any problems when doing this? Our PC runs on Wndows 7.
    Having just resolved iTunes not connecting to the store after the recent upgrade, I'm reluctant to do something that could potentially screw up the iPad which does what we want as it is.

    bobtheblob wrote:
    Ok, thanks for that. I'll hang fire for the moment & see if anyone else has any comments.
    That's probably a good idea.  If you are happy with the system as is, I'd wait to upgrade.  I can report that my friends and family have mostly upgraded to iOS 5 without any problems, but as you can probably tell from other posts on this board, lots of people have run into problems. 
    As the old saying goes, if it ain't broke, don't fix it!

  • Has anyone had success in getting Apple to correct Maps mistakes?

    On multiple occasions I've submitted a correction using the function within Maps to report errors, but nothing is ever done.  Has anyone ever had any success in getting Apple's attention and getting something fixed?  Or is the submitting a correction feature just a black hole?  I've had to tell friends with iPhones to always use Google Maps rather than Apple to navigate their way to my house because Maps has completely mislabeled the street outside my development.  It sure would be nice if they had a human being you could call...

    For users who's printer/scanner does not have a compatible driver from their manufacturer:
    How do I scan or print with the driver from Apple Software Update?
    Depending on your printer and the type of driver update, you might need to scan in a different way than you did before you installed Mountain Lion.
    Scan from the Print & Scan window:
    Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
    Click the Apple menu (# ), and then click System Preferences .
    Click Print & Scan (# ).
    Click your printer in the left pane.
    Click the Scan tab, and then click Open Scanner .
    Click Show Details . The details of the scan display, including options to change scan settings.Figure 5: Show Details scanning screen# Image: Show Details scanning screen
    Change any settings as necessary, and then click Scan .
    NOTE:
    Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
    Hope this helps

  • D800 file compatibility:  Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit?  I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

    Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit?  I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files. 
    I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
    I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
    Any advice appreciated?
    PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

    If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
    If some files do not import as expected using one mode, try switching to the other mode and importing again.
    Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

  • Has anyone had the iMac erase all files in a folder when burning a dvd of some of the file.  All that remain are the files that I burned.

    I had a folder that contained picture, both raw and jpgs from a trip that I had taken.  I wanted to burn a dvd of the folder that had 9 subfolders in it.  I got a message that it was too large.  I told it what directory I wanted and it created the dvd.  I when to get some additional files and all of my pictures, under each of the subfolders are gone.  The only thing that is under the subfolders is the directory that I burned to dvd.  Has anyone else had this problem?  If so were you able to recover the pictures?  I do have the backed up but am currently out of town and will not be back for a month.
    Thanks
    Mike Booher

    First Welcome to the Discussions.
    Depending on the Burning Software are you using. IF you drag the folder with the sub folders in the original folder if it is to large it will not burn it.
    Your best option is to seperate the Original Folder in 1/2 and then try to burn it on 2 seperate DVD's this way you would meet the size critera for the software.
    If you had good burning Software and were able to use dual layer it probably would have burned the entire folder and it would have fit.
    If you continue to have issues after I have explained it to you come back and someone will help you.
    Just remember that Apples burning Software is entry level and doesn't  have the functions of the top of the line in burning Software, Like Roxio, or DVD FAB, these 2 give you so many more options.
    Cheers
    Don

  • Has anyone had a problem with CS5 files becoming corrupt?

    I'm using Photoshop 5.5 and OS Lion. The Finder crashed while doing a Search. When I rebooted and opened Photoshop, every Photoshop file I had worked on that afternoon, plus two from the day before, was corrupt - nothing else was affected. Desktop preview icons and file sizes looked fine, but when I opened the files they were just bands of color and noise. All layers were gone and the size was incorrect.  The jpgs I had saved from the psd files were also corrupt. Adobe blames Apple and Apple blames Adobe. I'd like to learn why it happened, so I can make sure it won't happen again. This is my business and clients simply don't accept "the files became corrupt" as an excuse!

    I don't use Carbonite nor have I read anything about it, but do they just keep one copy of the latest backed-up file?  That seems a bit short-sighted.  Are there maybe options for recovering older versions that you're not seeing?
    Data can be very valuable in these modern times.
    I use a number of different forms of backup, including scheduled system image backups to external USB drives, scheduled data file backups to other drives and systems in my network, and even copying critical data to BD-R discs by hand occasionally.
    I'm sorry for your loss of data, mhall5553, but let this be a wake up call to all readers of this thread that you need to take the time to think about what's being backed up and whether you're protected well-enough from various different kinds of data loss. 
    Don't forget to think about what if you yourself screw up a file - e.g., accidentally save over one you really want to keep.
    It's not necessary to get a subscription to an online service to do backup.  It may seem a bit geeky but all computer systems provide some backup capabilities (e.g., to external USB drives, to discs, to other internal drives, etc.) - even if it's just a matter of copying your critical files yourself.
    Expect the worst and hope for the best.
    Speaking of which, glad we're all still here on this December 21, 2012.
    -Noel
    P.S., I was disappointed to learn that in Windows 8 Microsoft has deprecated the "Previous Versions" feature that was integrated with their Windows Backup tool in Windows 7.  They claim to have replaced it with something called "File Versions", I suppose to try to follow Apple's lead with Time Machine, but people are not finding File Versions to work very well.

  • Using SUMIFS on iPad Numbers has anyone had trouble using the keypad relational symbols in the "conditions" field?

    The iPad Numbers has a very nice data entry keyboard for expressing conditions.  They have the usual =, <, > but also have the single symbol version of >=, <= and <> (as an equals with a slash through it), however, if you try to use these keypad keys in the conditions field of the SUMIFS, it returns a syntax error.  After seeing some examples of Numbers '09 I discovered I had to express a relation inside double quotes, " ", which means the text keyboard is displayed and the very nice data entry keyboard is gone along with the nice symbols.  Has anyone seen this and am I doing something wrong or is this another bug?  Thanks.

    The xxxIF functions have (for as long as I have used them) required a text string as the argument unless it was equal to a value of a cell, with no logical operators. so it is not something new, its been that way for decades and I personally think Apple might have done it differently if they didnt have to maintain compatiability with older spreadsheet programs.
    i.e. not a bug, ensures backward compatability.
    Jason

Maybe you are looking for

  • Use Apple TV to Cut Cable Cord

    My wife and I are frustrated by the arrogance and greed of our local cable monopoly and looking at the plusses and minuses of Apple TV using Hulu and various other streaming sources. Dish TV is not an option for a few reasons. Our only cable usage wo

  • Best way to modify a WMV file and save to computer

    I have a 200 MB WMV file for a 4 hour meeting presentation.  I want to split it up and save it into 4 separate 1 hour presentations.  With a little editing in the middle to remove breaks and downtimes.  I can do everything but the Save.  Whenever I s

  • Excise duty is zero

    Friends, While creating sales order, in the sales order item level under condition tab system is showing BED, SED & AED (%) however  it is showing value as zero. Pricing procedure, condition record everything is fine. Please guide somebody as why sys

  • BOM Change - Delete an item(s) and insert new line items

    Hi, We need to mass update BOMs like for some of the existing BOM's we need to delete some line items and insert new line items. We want to use the BOMMAT04 IDOC in LSMW but I'd like to know couple of things before I go ahead with that approach For i

  • Organizing projects in library inspector (left panel)

    Within the library inspector or left panel of aperture, I have what seems like 70 plus projects which makes less user friendly when navigating to find a certain core of folders and albums.  Can I place all these projects into a folder that I name som