Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Thanks for reminding to at least update the results thus far.
Update 4:
I did get quite a bit of support initially although slowly over a period of a month or so. After Adobe FM support and my SharePoint systems engineer reviewed how FM10 was setup on my computer (which I am the admin for our department’s SP site) and how it interfaces with our SharePoint 2010 Enterprise Edition, there was two conclusions:
Basically Adobe FM Support said that FM10 did not support claims-based authentication and they can no longer help me. They said it will work with FM11 when it comes out.
My SP Systems Engineer, said that FM10 is connecting to SP 2010 just fine but that the FM10 has a software glitch that causes FM10 lose control when executing checkout procedure within FM10. I can checkout and edit that same file in SP with no problems.
About a month later, I upgraded to FM11 and ran into the same problem. I attempted to get Adobe FM Support to help and they said they will look into and get back to me. That was in July and I have not heard anything more from them, and to be honest, my schedule has been extremely busy the last 5 months that I have not had time to pursue it any further.
Needless to say, I was very disappointed with the SP interface and, overall, the lackluster support I received from Adobe. Having a working SP interface was one of the criteria for purchasing TCS3.5 (and subsequent upgrade) in the first place.
One thing of note, we migrated from SP 2007 to SP 2010 in February 2011 and, at the time of Adobe support, I still had access to my SP 2007 site. FM10 and FM11 had to no issues working with SP2007. Unfortunately, SP 2007 is not an option for me anymore.
Also, another observation of FM10/11 not working with SP 2010, it seems that FM10/11 is automatically configured to work with SharePoint Drafts folder locally when connecting to the SharePoint library. This worked just fine with SP 2007 but SP 2010 does not use SharePoint Drafts folder locally the same way (the programming changed, don’t recall where I saw it, probably when searching this issue online) and I suspect that is one of the main issues why it does not work correctly.
So at this time, I have not found a working solution to this problem.

Similar Messages

Has anyone had success using NI PCI cards at -20C? My specific needs are for RS-422/482 and GPIB cards.

NI cards have been qualified to operate only to zero degrees C. I need serial abd GPIB PCI cards that operate to -20C for military application. Has anyone had success using these cards at this lower operating temperature?

Hi,
I am not sure if this helps, but the ENET-232 is spec'd to operation at -40 degrees C.
Best Regards,
Aaron K.
Application Engineer
National Instruments

Has anyone had success using the player in a facebook newsfeed

I'd like to use the player as a previewer in a facebook newsfeed. Has anyone had success? Is there a recipe for this?
Thanks,
Leo

The Juniper VPN is a SSL-based VPN solution whereas the native client supports L2TP and PPTP only - in other words they're completely different beasts.
That said, you shouldn't have any issue connecting to the SSL-VPN. I do it almost daily. You may need to be running the latest (or at least, recent) software on the Juniper box, though - earlier versions of the Juniper software had problems.

Camera on iPhone4 doesn't work, when you use either the icon on the screen all you get the the shutter. I am unable take pictures. Has anyone had the same problem and are there any solutions?

The camera on my iPhone 4 isn't working and hasn't for quite sometime. I have updated the phone to IOS 6 and it hasn't made any difference.
When you use the icon that appears at the bottom of the screen or the camera icon on the main screen all you see is the camera shutter.I have tried to restore the camera and that hasn't made any difference. I have spoken to Apple support and they sent me a support site to check out, but there isn't any specific solution for my problem. Has anyone had a similar problem and is there a solution?

Try:
- Reset the iPhone. Nothing will be lost
Reset iPhone: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPhone.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My imac intel display is frozen. Both the mouse and my network is working. Has anyone had problems like this and were you successful at fixing it?

My imac (Intel) display is frozen. Both the mouse and the network are working. I've shut down various times, pulled the cord from the receptacle on the power strip, and restarted several times. No luck. Has anyone had problems like this and were you successful at fixing it? Thanks. Would appreciate any help. Paula

Same problem, but a c.2009 iMac running OS X 10.9.1. Just happened overnight. Presently, I'm able to access my HD via wireless via laptop and copying all non-backed up files to an external drive. So far, Paula is the only other person I've found with this same problem and hers was three years ago! Going to keep searching for an answer.

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

Has anyone had success with Apple replacing their iPhone 4 [out-of-warranty] concerning the stuck power button?

For $149 they will do an out-of-warranty replacement.

HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

Has anyone had the Network time and date error with Apple TV when traveling?

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

I'm unable to send an email, i get username or password incorrect despite being correct. Has anyone had this problem before and fixed it?

I'm unable to send an email, i get username or password incorrect despite being correct. Has anyone had this problem before and fixed it?

Are you sure the settings are correct? Did you check the outgoing mail server setting? Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

When I statred iTunes match I lost some of my music and all my playlists, has anyone had this problem? And can I restore it?

Restore your media from the backup of the computer created prior to restoring the computer.
You did create a backup, correct? Not doing so would be extremely unintelligent.
iOS devices are NOT backup devices.

I have six memory cards and my computer will no longer download the pictures from them into my iphotos. Says error with one of the pics. Has anyone had trouble lie this and what do I do?

I have six memory cards that my computer will not download. It says there is an error with one of the photos. Has anyone had this problem and what do I do to fix it? It used to download

What version of iPhoto?
Does this message come on all six cards?
Are these Raw or Jpegs? If Raw, what camera?
Can you access the images on the cards with Image Capture (in your Applications folder?)

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this code appear, and what did they do to solve it?

My itouch is disabled, when I tried to restore it, it came up with Error code 3094. Has anyone had this error code appear for them before and how were they able to fix it?
Thank You

See SIMPLE easy solution for 1015 3094 3014 21 error

I am unable to enter a £ symbol in a wifi password has anyone had a similar problem and found a solution?

I am unable to enter a £ symbol to a wifi password has anyone had similar problem and found a solution?

On the US keyboard, it's option + 3.
However, when I try to enter that combination in Mail 4.4 or the Safari 5.0.5 browser, it is apparently has some reserved function and opens another window. It does seem to produce the correct character in Firefox 4.01
If possible, I'd suggest changing the WiFi password so that it does not included any 'reserved' keystrokes.

I cannot get sound from apple TV. Has anyone had the same experience and what did they do?

Hi, I recently bought Apple TV 2nd gen. I can, after a while, get access to my library but when I start to play movies I cannot get sound. Has anyone had a similar experience? If so what did you do to overcome the problem?

Do the movies contain both stereo and 5.1 audio.
Have you tried toggling the Dolby Digital setting or the Audio Output setting.

Has anyone had success in getting Apple to correct Maps mistakes?

On multiple occasions I've submitted a correction using the function within Maps to report errors, but nothing is ever done. Has anyone ever had any success in getting Apple's attention and getting something fixed? Or is the submitting a correction feature just a black hole? I've had to tell friends with iPhones to always use Google Maps rather than Apple to navigate their way to my house because Maps has completely mislabeled the street outside my development. It sure would be nice if they had a human being you could call...

For users who's printer/scanner does not have a compatible driver from their manufacturer:
How do I scan or print with the driver from Apple Software Update?
Depending on your printer and the type of driver update, you might need to scan in a different way than you did before you installed Mountain Lion.
Scan from the Print & Scan window:
Place the item that you want to scan on the scanner glass, or load it into the automatic document feeder (ADF) if your printer has one.
Click the Apple menu (# ), and then click System Preferences .
Click Print & Scan (# ).
Click your printer in the left pane.
Click the Scan tab, and then click Open Scanner .
Click Show Details . The details of the scan display, including options to change scan settings.Figure 5: Show Details scanning screen# Image: Show Details scanning screen
Change any settings as necessary, and then click Scan .
NOTE:
Make sure to select either the Flatbed mode or the Document Feedermode, depending on your printer and how you plan to scan.
Hope this helps

Has anyone had success using SharePoint and FrameMaker 10 together using CMS?

Similar Messages

Maybe you are looking for