Has anyone implemented the Amulet Serial Protocol for LabVIEW?

If not, is anyone interested in helping implementing one? I know a lot about the Amulet Serial Protocol, but nothing about LabVIEW. Willing to throw in an Amulet Starter Kit as well.

Amulet Technologies (http://www.AmuletTechnologies.com) has a revolutionary technology which allows you to rapidly author a graphical user interface for LCD's (liquid crystal displays) using drag-n-drop HTML tools. In other words, Amulet is to LCD's like LabVIEW is to personal computers. Interfacing Amulet to an external device(s) for I/O is done through a serial connection.

Similar Messages

Has anyone heard of the replacement process program for the ipad?

Just spoke to a specialist that told me that apple was starting a pilot program that repairs ipad screens. Has anyone heard of this?

These are the only options Apple lists as available for iPad service:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad

Has anyone noticed that the Otterbox Defender case for the Droid Maxx is not manufactured correctly?

After ordering 2 cases from Otterbox directly, and having to send both of them back, I called a Verizon store and had them compare the Otterbox Defender case for the Droid Maxx to the actual phone. They were surprised to note that the hole for the camera on the case (to the left of the speaker) was on the opposite side of the camera on the phone (to the right of the speaker). And, there is no hole for the camera's sensor on the Otterbox case.

Then return it to an Apple Store and complain and if neccessary get your money back

Has anyone else used the Consumer Guarantees Act for a repair? (New Zealand)

My iPod nano stopped working one day and keeps constantly restarting and telling me I have to restore with iTunes. I did restore multiple times but the issue was never solved. I tried doing a hard reset and also putting the iPod into disk mode and restoring again, but that didn't work either. I went to an Apple reseller (no Apple stores in New Zealand sadly) and they said that it looks like a hardware problem, and repairing will cost around $100 (NZD) along with a $39 assessment charge, since my warranty expired in January. I decided that's not worth it since buying a new iPod costs only slightly more.
But I was just wondering, would this be covered under the Consumer Guarantees Act?
Thanks in advance!

My iPod nano stopped working one day and keeps constantly restarting and telling me I have to restore with iTunes. I did restore multiple times but the issue was never solved. I tried doing a hard reset and also putting the iPod into disk mode and restoring again, but that didn't work either. I went to an Apple reseller (no Apple stores in New Zealand sadly) and they said that it looks like a hardware problem, and repairing will cost around $100 (NZD) along with a $39 assessment charge, since my warranty expired in January. I decided that's not worth it since buying a new iPod costs only slightly more.
But I was just wondering, would this be covered under the Consumer Guarantees Act?
Thanks in advance!

Has anyone implemented real time datasource for COPA ?

Hello,
Has anyone implemented a real time data source for COPA ? Please share details of the process for how this can be set up. Thanks.

Hi,
Please follow the following steps...
COPA Extraction
The below are the command steps and explanation. COPA Extraction -steps
R/3 System
1. KEB0
2. Select Datasource 1_CO_PA_CCA
3. Select Field Name for Partitioning (Eg, Ccode)
4. Initialise
5. Select characteristics & Value Fields & Key Figures
6. Select Development Class/Local Object
7. Workbench Request
8. Edit your Data Source to Select/Hide Fields
9. Extract Checker at RSA3 & Extract
BW
1. Replicate Data Source
2. Assign Info Source
3. Transfer all Data Source elements to Info Source
4. Activate Info Source
5. Create Cube on Infoprovider (Copy str from Infosource)
6. Go to Dimensions and create dimensions, Define & Assign
7. Check & Activate
8. Create Update Rules
9. Insert/Modify KF and write routines (const, formula, abap)
10. Activate
11. Create InfoPackage for Initialization
12. Maintain Infopackage
13. Under Update Tab Select Initialize delta on Infopackage
14. Schedule/Monitor
15. Create Another InfoPackage for Delta
16. Check on DELTA OptionPls r
17. Ready for Delta Load
LIS, CO/PA, and FI/SL are Customer Generated Generic Extractors, and LO is BW Content Extractors.
LIS is a cross application component LIS of SAP R/3 , which includes, Sales Information System, Purchasing Information System, Inventory Controlling....
Similarly CO/PA and FI/SL are used for specific Application Component of SAP R/3.
CO/PA collects all the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs). FI/SL collects all the OLTP data for financial accounting, special ledger
1) Add the fields to the operating concern. So that the required field is visible in CE1XXXX table and other concerned tables CE2XXXX, CE3XXXX etc.
2) After you have enhanced the operating concern then you are ready to add it to the CO-PA data source. Since CO-PA is a regenerating application you can't add the field directly to the CO-PA data source. You need to delete the data source and then need to re-create using KEB2 transaction.
3) While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source. If you re-create using a different name then you will be needing extra build efforts to take the data into BW through IS all the way top to IC. I would personally suggest keep the same old data source name as before.
If you are adding the fields from the same "Operating concern" then goto KE24 and edit the dataaource and add your fields. However if you are adding fields outside the "Operating concern" then you need to append the extract structure and populate the fields in user exit using ABAP code. Reference OSS note: 852443
1. Check RSA7 on your R3 to see if there is any delta queue for COPA. (just to see, sometimes there is nothing here for the datasource, sometimes there is)
2. On BW go to SE16 and open the table RSSDLINIT
3. Find the line(s) corresponding to the problem datasource.
4. You can check the load status in RSRQ using the RNR from the table
5. Delete the line(s) in question from RSSDLINIT table
6. Now you will be able to open the infopackage. So now you can ReInit. But before you try to ReInit ....
7. In the infopackage go to the 'Scheduler' menu > 'Initialization options for the source system' and delete the existing INIT (if one is listed)
Regards,
Tapan

Has anyone implemented a QUADRATURE IN / QUADRATURE OUT application using the Compact FieldPoint?

Has anyone implemented a QUADRATURE IN / QUADRATURE OUT application using the Compact FieldPoint? The units being used are the cFP-QUAD-510 [input] and the cFP-CTR-500 [output]. What I would like to do is use the QUAD-510 to capture a quadrature signal from a sensor, which in turn would generate a count per quadrature detection. Within LabVIEW, adjust the count received. Then, output a quadrature signal, based on the adjusted count, using The CTR-500.

Hello Andre,
Thanks for your response. That example does provide the output desired, and it is currently being use in my application, along with the 32-bit counter example available via NI for the QUAD-510, which also works. My query was mainly geared to find out if an application with the characteristics described in my original question has already been implemented, this, to avoid "re-inventing the wheel." Additional input on this thread is welcome and appreciated. Thanks.
Regards,
Dag Gollopp

Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS

Hi all,
Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS?
Need urgent help!
Thanks in Advance

Hi Kashi,
Thanks for your response. However, we are implementing Oracle Price Analytics using universal adaptor for EBS as source.
In BI apps 7.9.6.4, one approach is to populate the csv files and load using universal adaptor. Can anyone tell me what are the tables in EBS that I need to consider to populate these files for pricing analytics?
Are there any SQL queries available to populate pricing csv files?
Any help will be appreciated.

Has anyone implemented Google Blog Search into BC (like Wordpress has)?

Hi:
I have a "potential" client interested in an automated way to show a list of other blogs and websites where they were mentioned. I am imagining this to work like the Google Blog Search that Wordpress Admin Dashboard has, where it searches for who has linked to your site and shows you a list. Can this be done in BC? Has anyone implemented something like this?
Thanks in advance.

If you are referring to 'Trackbacks' then yes it can.

Has anyone implement paging / page breaks in long content items?

Has anyone implement paging / page breaks in long content items? Eg when a text item is long it would be nice if there was a portlet or something to be able to separate it in pages that fit in the users screen and display a message in the bottom like "page 1 of 3" etc with next and previous links.
Any ideas?

Oracle has a pretty good Oracle By Example on OTN covering this at [http://www.oracle.com/technology/obe/obe1014portal/html_templates/html_templat.htm]. I'd also recommend following on with the one on Item Placeholders to complete the picture [http://www.oracle.com/technology/obe/obe1014portal/item_placeholders/itmplacehold.htm].
My announcements are text items in one region. The region has a HTML content layout that uses pl/sql to determine where the first space is after 650 characters and if it is larger than 650 characters opens the item in a page using the item placeholder (hence my suggestion above). The code to generate this looks like this on the template. v_length is declared at the top of the tempalte so it is easy to change the length of the announcements:
      IF LENGTH ('#ITEM.CONTENT#') > v_length THEN
      v_space := INSTR('#ITEM.CONTENT#',' ',v_length,1); /*Find first space after designated length*/
         HTP.p('
<table width="100%" cellpadding="3" cellspacing="0" border="0">
    <tr>
      <td>#ITEM.IMAGE#</td><td valign="top">' || SUBSTR ('#ITEM.CONTENT#', 1, v_space) || '</td>
    </tr>
    <tr>
      <td align="right" colspan="2"> <MORE...</td>
    </tr>
</table>'
      ELSE
         HTP.p ('
   <table width="100%" cellpadding="3" cellspacing="0" border="0">
    <tr>
      <td>#ITEM.IMAGE#</td><td valign="top">#ITEM.CONTENT#</td>
    </tr>
</table>'
      END IF;Check out the OBE's and post back with any questions. They can sometime be challenging to get to work just right, but you can do a lot with these templates.
Rgds/Mark M.

Has anyone implemented Facebook SSO on Android using Adobe AIR ANE?

Has Anyone implemented Facebook SSO on Android using Adobe AIR ANE?
All help would be appreciated

Hi,
We have two ANE's for this, one is a basic single sign on and the other is a full FB API implementation.
Single sign on:
http://distriqt.com/product/air-native-extensions/facebook-utils
Full API:
http://distriqt.com/product/air-native-extensions/facebookapi
Cheers

Has anyone implemented JavaScript Object Notation in LabVIEW?

Hi Guys,
I was looking at writing an application using JSON-RPC
http://en.wikipedia.org/wiki/JSON-RPC
Has anyone implemented something similar, or are there any examples of this?
I was going to write it with TCP VIs, and use string parsing to work through any responses, but if anyone had some advice, it would be appreciated.
Cheers,
Anthony

Anthony,
This sounds like a very interesting project and I would like to hear how it goes for you.
You can of course choose to implement a JSON-RPC system using either TCP or HTTP as the transport. TCP would give you a potentially more responsive system but you would have to implement much more of the system from scratch as it were.
As LaRisa_s was saying, if LabVIEW 8.6 is available to you, you can take advantage of the Web Services feature which will do a lot of the work for you. Your VI that runs as a web service would have to parse the data sent from the client to determine the correct VI to call and then convert the parameters and call the VI.
You are completely correct that there is no direct support for JSON-RPC. We evaluated several Web Service and RPC mechanisms before deciding on RESTful web services for LabVIEW 8.6. In fact, if you have LV8.6 and JSON-RPC isn't a hard requirement, I would strongly recommend looking at using the RESTful mechanism that is built in. If you can use it then much less work will be required of you on the server side of your application.
If you do need to go with JSON-RPC I would be interested to hear what factors went into the decision so we can improve LabVIEW's built in web services.
Either way- let us know how your project goes.

Has anyone actually got the Green Screen feature to work?

Has anyone actually got the Green Screen feature to work? I've been trying for about 8 hours, absolutely no success. I have followed the iMovie Help instructions and the examples on the internet, over and over again. I've tried every imaginable variation on the instructions. Nothing from my green movie shows up. The green in my video is pure green - 100% green, 0% red and 0% blue. Yet the non-green images in the video aren't getting displayed at all. Several other people have mentioned a similar problem on these forums and they are all "unanswered". Is that because this is an unsolvable problem? Is it an iMovie bug? Sigh. I'm a big fan of Apple but stuff like this gives them a bad name.

After several more hours of diagnosis I have identified some conditions which can make Green Screen slightly work (but not much). The condition is as follows. The green screen clip must be carefully dropped at the beginning of a video clip, such that at least the first two seconds of the green screen clip (no less, but no more or the clip will become attached to the previous clip and then it's broken again) are displayed over the PREVIOUS video clip. But the green screen will not work on the previous clip, only on the second clip. So you will always lose the first two seconds of the green screen video. It took me a lot of experimenting to discover this anomaly.
Clearly this is a bug, but since not all users on the internet experience this bug, (some online videos shows that Green Screen actually works as advertised) it's most likely related to the video card driver. My video card is an ATI 4870. If you have such a card, there's probably no hope that you can get this feature to work unless Apple fixes the driver or possibly the iMovie application, or you use my tricky workaround.

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

HAS ANYONE GONE OVER THE 2GB DATA PLAN???

JUST WONDERING HAS ANYONE GONE OVER THE 2GB DATA PLAN? IS THAT ENOUGH DATA FOR THE MONTH? EVERYDAY NORMAL USAGE ANY INPUT WILL HELP THANKS!!!

before returning .. i have used my iphone for 10 days and my data usage was 20 MB ! I was scared i will over shoot, so i always used in wifi hotspots and i kept my 3G and data off . ! But i dont think you will overshoot even if you check mails or browse a lot. Unless you want to see movies or video conference.

Has anyone else experienced the stopping and starting again while playing music in iTunes. It was fixed but with the last update it has started skipping again.

Has anyone else experienced the stopping and starting again whil playing music in itunes. It was working fine wit the prior fix, but after the last update
it started skipping again.

Try it in another vehicle see if it still happens, at least you can narrow it down to your phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!

Has anyone implemente​d the Amulet Serial Protocol for LabVIEW?

Similar Messages

Maybe you are looking for

Has anyone implemented the Amulet Serial Protocol for LabVIEW?