Has anyone implemented the listUpcomingConference in 10g?

I have been trying to do a post a request (with the param0 parameter filled up) and using the service url provided in the definition.Still this is the response it gives me :You are not authorized with these credentials error. (even passing the right credentials, siteid, userid,all other parameters I have tried passing them and making them optional). Is there anything that has to be setup -proxy or some WSDL download etc..something that I am missing??

Pinnex,
I had issues that i resolved. Now everything's OK.
When you upload a file FCK editor should display some errors...
So what is exactly your problem ?
Is the image uploaded on your server ? or your image is simply not displayed in FCK editor navigator ?
Max.

Similar Messages

Has anyone implemented a QUADRATURE IN / QUADRATURE OUT application using the Compact FieldPoint?

Has anyone implemented a QUADRATURE IN / QUADRATURE OUT application using the Compact FieldPoint? The units being used are the cFP-QUAD-510 [input] and the cFP-CTR-500 [output]. What I would like to do is use the QUAD-510 to capture a quadrature signal from a sensor, which in turn would generate a count per quadrature detection. Within LabVIEW, adjust the count received. Then, output a quadrature signal, based on the adjusted count, using The CTR-500.

Hello Andre,
Thanks for your response. That example does provide the output desired, and it is currently being use in my application, along with the 32-bit counter example available via NI for the QUAD-510, which also works. My query was mainly geared to find out if an application with the characteristics described in my original question has already been implemented, this, to avoid "re-inventing the wheel." Additional input on this thread is welcome and appreciated. Thanks.
Regards,
Dag Gollopp

Has anyone put the RAR Background Job Spool on a different server?

We are on GRC 5.3 SP 13.
Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
I currently have it assigned to a folder on the GRC server, but it is running out of space. I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls. They are also resisting downloading the reports (more work for them). I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded. I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
Has anyone done this, and did you run into any problems?
Thanks.

Hello Bob,
I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
- Specific user to connect to FileServer
- Availability of the FileServer. If the FS is down, the RAR job will cancel.
- Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure, because it depends on a lot of things like network speed, server load, etc.
Maybe someone has already implemented it and gives you more hints.
Cheers,
Diego.

Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS

Hi all,
Has anyone implemented Oracle Pricing Analytics(7.9.6.4) with source EBS?
Need urgent help!
Thanks in Advance

Hi Kashi,
Thanks for your response. However, we are implementing Oracle Price Analytics using universal adaptor for EBS as source.
In BI apps 7.9.6.4, one approach is to populate the csv files and load using universal adaptor. Can anyone tell me what are the tables in EBS that I need to consider to populate these files for pricing analytics?
Are there any SQL queries available to populate pricing csv files?
Any help will be appreciated.

Has anyone implemented Google Blog Search into BC (like Wordpress has)?

Hi:
I have a "potential" client interested in an automated way to show a list of other blogs and websites where they were mentioned. I am imagining this to work like the Google Blog Search that Wordpress Admin Dashboard has, where it searches for who has linked to your site and shows you a list. Can this be done in BC? Has anyone implemented something like this?
Thanks in advance.

If you are referring to 'Trackbacks' then yes it can.

Accessibility, has anyone coded the option to change site colour?

Hi guys,
I have a client that needs their site to be coded with accessibility in mind, I have found a work around for changing the font size but has anyone coded the colour options like on this site http://www.guidedogs.org.uk/ ? Is there an accessibility plugin or anything that BC offers?
Thanks
David

Hi David, that is just all CSS and javascript.
The zoom thing on sites is an old concept and not needed though. Browsers zoom handle that these days.
Colour wise you just have different CSS files and styles and on change of a dropdown or tick with javascript you change the css file and if you want it saved you drop a cookie reference.
That is something as a webdesigner/developer/company is our job to implement, it is not something BC will offer.

Has anyone implement paging / page breaks in long content items?

Has anyone implement paging / page breaks in long content items? Eg when a text item is long it would be nice if there was a portlet or something to be able to separate it in pages that fit in the users screen and display a message in the bottom like "page 1 of 3" etc with next and previous links.
Any ideas?

Oracle has a pretty good Oracle By Example on OTN covering this at [http://www.oracle.com/technology/obe/obe1014portal/html_templates/html_templat.htm]. I'd also recommend following on with the one on Item Placeholders to complete the picture [http://www.oracle.com/technology/obe/obe1014portal/item_placeholders/itmplacehold.htm].
My announcements are text items in one region. The region has a HTML content layout that uses pl/sql to determine where the first space is after 650 characters and if it is larger than 650 characters opens the item in a page using the item placeholder (hence my suggestion above). The code to generate this looks like this on the template. v_length is declared at the top of the tempalte so it is easy to change the length of the announcements:
      IF LENGTH ('#ITEM.CONTENT#') > v_length THEN
      v_space := INSTR('#ITEM.CONTENT#',' ',v_length,1); /*Find first space after designated length*/
         HTP.p('
<table width="100%" cellpadding="3" cellspacing="0" border="0">
    <tr>
      <td>#ITEM.IMAGE#</td><td valign="top">' || SUBSTR ('#ITEM.CONTENT#', 1, v_space) || '</td>
    </tr>
    <tr>
      <td align="right" colspan="2"> <MORE...</td>
    </tr>
</table>'
      ELSE
         HTP.p ('
   <table width="100%" cellpadding="3" cellspacing="0" border="0">
    <tr>
      <td>#ITEM.IMAGE#</td><td valign="top">#ITEM.CONTENT#</td>
    </tr>
</table>'
      END IF;Check out the OBE's and post back with any questions. They can sometime be challenging to get to work just right, but you can do a lot with these templates.
Rgds/Mark M.

Has anyone received the new update for the X6?

has anyone received the new update for the X6 with the updated browser? what is the firmware version?
Greece Nokia X6 RM-559 v40.0.002

I agree with Vinimutta!!
*slide to unlock with digital clock & sms & missed call notification
*support for homescreeen widgets
*qwerty keypad in portrait mode
every single update so far was pathetic attemp to fool us and make us happy.
there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
nokia promises alot in the new update, (browser, smiler and map)
hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
Why is it so hard to implement?
slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
its no like we are asking for impossible like continuous autofocus for video recording!!

Has anyone implemented Facebook SSO on Android using Adobe AIR ANE?

Has Anyone implemented Facebook SSO on Android using Adobe AIR ANE?
All help would be appreciated

Hi,
We have two ANE's for this, one is a basic single sign on and the other is a full FB API implementation.
Single sign on:
http://distriqt.com/product/air-native-extensions/facebook-utils
Full API:
http://distriqt.com/product/air-native-extensions/facebookapi
Cheers

Has anyone implemented JavaScript Object Notation in LabVIEW?

Hi Guys,
I was looking at writing an application using JSON-RPC
http://en.wikipedia.org/wiki/JSON-RPC
Has anyone implemented something similar, or are there any examples of this?
I was going to write it with TCP VIs, and use string parsing to work through any responses, but if anyone had some advice, it would be appreciated.
Cheers,
Anthony

Anthony,
This sounds like a very interesting project and I would like to hear how it goes for you.
You can of course choose to implement a JSON-RPC system using either TCP or HTTP as the transport. TCP would give you a potentially more responsive system but you would have to implement much more of the system from scratch as it were.
As LaRisa_s was saying, if LabVIEW 8.6 is available to you, you can take advantage of the Web Services feature which will do a lot of the work for you. Your VI that runs as a web service would have to parse the data sent from the client to determine the correct VI to call and then convert the parameters and call the VI.
You are completely correct that there is no direct support for JSON-RPC. We evaluated several Web Service and RPC mechanisms before deciding on RESTful web services for LabVIEW 8.6. In fact, if you have LV8.6 and JSON-RPC isn't a hard requirement, I would strongly recommend looking at using the RESTful mechanism that is built in. If you can use it then much less work will be required of you on the server side of your application.
If you do need to go with JSON-RPC I would be interested to hear what factors went into the decision so we can improve LabVIEW's built in web services.
Either way- let us know how your project goes.

Has anyone implemented real time datasource for COPA ?

Hello,
Has anyone implemented a real time data source for COPA ? Please share details of the process for how this can be set up. Thanks.

Hi,
Please follow the following steps...
COPA Extraction
The below are the command steps and explanation. COPA Extraction -steps
R/3 System
1. KEB0
2. Select Datasource 1_CO_PA_CCA
3. Select Field Name for Partitioning (Eg, Ccode)
4. Initialise
5. Select characteristics & Value Fields & Key Figures
6. Select Development Class/Local Object
7. Workbench Request
8. Edit your Data Source to Select/Hide Fields
9. Extract Checker at RSA3 & Extract
BW
1. Replicate Data Source
2. Assign Info Source
3. Transfer all Data Source elements to Info Source
4. Activate Info Source
5. Create Cube on Infoprovider (Copy str from Infosource)
6. Go to Dimensions and create dimensions, Define & Assign
7. Check & Activate
8. Create Update Rules
9. Insert/Modify KF and write routines (const, formula, abap)
10. Activate
11. Create InfoPackage for Initialization
12. Maintain Infopackage
13. Under Update Tab Select Initialize delta on Infopackage
14. Schedule/Monitor
15. Create Another InfoPackage for Delta
16. Check on DELTA OptionPls r
17. Ready for Delta Load
LIS, CO/PA, and FI/SL are Customer Generated Generic Extractors, and LO is BW Content Extractors.
LIS is a cross application component LIS of SAP R/3 , which includes, Sales Information System, Purchasing Information System, Inventory Controlling....
Similarly CO/PA and FI/SL are used for specific Application Component of SAP R/3.
CO/PA collects all the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs). FI/SL collects all the OLTP data for financial accounting, special ledger
1) Add the fields to the operating concern. So that the required field is visible in CE1XXXX table and other concerned tables CE2XXXX, CE3XXXX etc.
2) After you have enhanced the operating concern then you are ready to add it to the CO-PA data source. Since CO-PA is a regenerating application you can't add the field directly to the CO-PA data source. You need to delete the data source and then need to re-create using KEB2 transaction.
3) While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source. If you re-create using a different name then you will be needing extra build efforts to take the data into BW through IS all the way top to IC. I would personally suggest keep the same old data source name as before.
If you are adding the fields from the same "Operating concern" then goto KE24 and edit the dataaource and add your fields. However if you are adding fields outside the "Operating concern" then you need to append the extract structure and populate the fields in user exit using ABAP code. Reference OSS note: 852443
1. Check RSA7 on your R3 to see if there is any delta queue for COPA. (just to see, sometimes there is nothing here for the datasource, sometimes there is)
2. On BW go to SE16 and open the table RSSDLINIT
3. Find the line(s) corresponding to the problem datasource.
4. You can check the load status in RSRQ using the RNR from the table
5. Delete the line(s) in question from RSSDLINIT table
6. Now you will be able to open the infopackage. So now you can ReInit. But before you try to ReInit ....
7. In the infopackage go to the 'Scheduler' menu > 'Initialization options for the source system' and delete the existing INIT (if one is listed)
Regards,
Tapan

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown?

Has anyone upgraded the Ironport ESA to 8.5.6-074 and had the issues of Raid status showing unknown? After we upgraded our appliances we are having issues with our ESA appliances showing the RAID status as unknown. When we reported the issue to CISCO we were updated there were no issues reported at all. Could anyone please confirm if you have experienced the same issue.

You should see OPTIMAL - meaning the drives in the C170 are in good health/status:
myc680.local> version
Current Version
===============
UDI: C680 V FCH1611V0B2
Name: C680
Product: Cisco IronPort C680 Messaging Gateway(tm) Appliance
Model: C680
Version: 8.5.6-074
Build Date: 2014-07-21
Install Date: 2014-07-29 11:16:34
Serial #: xxx-yyy1611Vzzz
BIOS: C240M3.1.4.5.2.STBU
RAID: 3.220.75-2196, 5.38.00_4.12.05.00_0x05180000
RAID Status: Optimal
RAID Type: 10
BMC: 1.05
There are times post-reboot, that you'll see and get notification of RAID sub-optimal --- meaning that the appliance is running through on a health-check of the appliance's RAID. You should be getting a notification once RAID status has returned to OPTIMAL, or as per the older OS revisions, READY:
myc170.local> version
Current Version
===============
UDI: C170 V01 FCH1428V06A
Name: C170
Description: Cisco IronPort C170
Product: Cisco IronPort C170 Messaging Gateway(tm) Appliance
Model: C170
Version: 7.6.3-019
Build Date: 2013-06-09
Install Date: 2014-09-12 13:52:24
Serial #: xxxxxxD87B39-yyyyyy8V06A
BIOS: 9B1C115A
RAID: 02
RAID Status: READY
RAID Type: 1
BMC: 2.01

Has anyone implemented the listUpcomingConference in 10g?

Similar Messages

Maybe you are looking for