Has anyone installed a Cisco VPN client on a new MacBook Air?

It's one of the new oned with Mac OSX Lion.
If so, can you give me any tips? In the downloader, the .dmg file is listed as a Disk Image, and it won't run and install.
My company is very particular, and I have to run the Cisco VPN client to access a corporate control panel I need.
I've always been a PC user before, so I'm having a bit of a learning curve, but I approached the installation just as I did other apps that installed correctly.
Thanks!
Teri

First, OS X has a built-in Cisco client. You should use that if at all possible. Cisco's Mac client is notoriously bad.
If you must install the client, what happens when you try to mount the disk image?

Similar Messages

  • Has anyone else developed the problem of an over-sensitive MacBook AIr cursor?  In the last few days mine has developed a mind of its own, and when you move it to the desired spot it can jump quite randomly.  In mail, I try reply but it's jumped to "fwd"!

    Has anyone else developed the problem of an over-sensitive MacBook AIr cursor?  In the last few days mine has developed a mind of its own, and when you move it to the desired spot it can jump quite randomly.  In mail, I try reply but it's jumped to "fwd" instead!  Irritating.

    Jumpy Trackpad
    http://support.apple.com/kb/TS1449

  • Anyone having trouble with the trackpad on their new Macbook Air?

    I bought the new (2012) Macbook Air 2 days after they were released.  I have been using a PC forever and was looking forward to this being the right time to switch over to the Mac.  However, my trackpad doesnt work well at all and it is to the point where I want to return this thing.  Once the mac notices I am moving my finger it tracks fine, but if I stop for 5 seconds and resume moving it, it will not pickup on the movement and I need to try many times before it starts tracking properly.  This is most annoying and from my point of view makes this otherwise beautiful laptop unnacceptable.  I have tried plugged and unplugged as I read this an issue in earlier mac airs, but it doesnt matter.  It seems like there is a software interrupt that is not a high enough priority and the computer get's busy about something else and forgets about the trackpad.

    Turned out the hardware was bad.  Apple exchanged it for a new Mac Air and the new trackpad works great.  Thank goodness it was a defect.  If the trackpads all worked like that I would have been bummed.

  • How to install windows 8 on brand new macbook air

    Has anyone installed windows 8 via bootcamp on a new macbook air? I do not have a previous windows 7 on my mac either?

    Here is says (point 4) that it doesn't work.
    http://support.apple.com/kb/ht4818#3.1
    And here a video, where they seem to get it working
    http://www.youtube.com/watch?v=3lNOrfAWEhg

  • Problem with Cisco VPN client and HP elitebook 2530p windows 7 64-bit

    Hi there
    I have a HP Elitebook 2530p which i upgraded to windows 7 64-bit. I installed the Cisco VPN client application (ver. 5.0.07.0290 and also 64-bit) and the HP connection manager to connect to the internet through a modem Qualcomm gobi 1000 (that is inside the laptop). When I connect to the VPN, it connects (I write the username and password) but there is no traffic inside de virtual adapter for my servers. When I connect to the internet through wire or wireless internet, I connect de VPN client and there is no problem to establish communication to my servers.
    I tried everything, also change the driver and an earlier version of the HP connection manager application. I also talked to HP and they told me that there was a report with this kind of problem and it was delivered to Cisco. I don’t know where is the problem.
    Could anyone help me?
    Thanks to all.

    You can try to update Deterministic Network Enhancer to the below listed release which supports
    WWAN Drivers.
    http://www.citrix.com/lang/English/lp/lp_1680845.asp.
    DNE now supports WWAN devices in Win7.  Before downloading the latest version of DNEUpdate from the links below,  be sure you have the latest
    drivers for your network adapters by downloading them from the vendors’ websites.
    For 64-bit: ftp://files.citrix.com/dneupdate64.msi
    Hope that helps.

  • Cisco VPN Client installation freezes on Windows 7

    Hello,
    I am in need of some help installing the Cisco VPN Client on a Windows 7 workstation.
    Here are some details:
    Cisco VPN Client Version: 5.0.07.0410
    Operation System: Microsoft Windows 7 Enterprise, 32-bit, version 6.1, build 7600
    PC Hardware: IBM Thinkpad T42, Type 2373-7WE
    Issue Description:
    I attempted to install the Cisco VPN Client on the computer with the local administrator account in Windows 7. The computer was given a clean installation of Microsoft Windows 7 Enterprise (Existing HDD partitions were deleted and formatted). After the OS installation, I installed the network driver via Windows Update, and proceeded to run the installation for the Cisco VPN Client. The installation apears to proceed smoothly until the installation progress indicator reaches the point where it states that it is installing the "Deterministic Network Enhancer." Shortly reaching this point, the Windows CPU Usage monitor reaches 100% and the operating system freezes.
    I have tried the following actions, which failed to successfully install the software:
    a) Installing Cisco VPN Client 5.0.00.0340 produced the same problem.
    b) Reformatted the hard drive, installed Windows 7, and tried to install the Cisco VPN Client again, but failed.
    c) Used Windows 7 System Restore to restore OS state prior to the installation of the Cisco VPN Client. Then, ran Citrix's winfix.exe tool. After that, I ran Citrix's dneupdate.msi program for 32-bit Windows operating systems, but that also crashed the OS mid-way through the installation/update.
    d) This URL from Citrix (http://www.citrix.com/lang/English/lp/lp_1680845.asp) suggested changing a Windows registry key, then try re-installing the Cisco VPN Client. However, that did not work.
    I am at a loss as to how to resolve this issue. If anyone can provide some suggestions or a solution to this issue, I would greatly appreciate it.
    Regards,
    Samson

    Welcome to the forums !
    The only version of 10gR2 that is certified/supported on Win 7 Pro or higher is 10.2.0.5. Pl see this related thread for further information
    Re: Oracle 10g 64 bit install on Windows 7 platform
    http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CHDFHIEA
    10.2.0.5 is only available on My Oracle Support, access to which requires a valid support contract purchased from Oracle
    HTH
    Srini

  • Cisco VPN client -install error

    Hi,
    I have a problem when i'm trying to install Cisco VPN client on my Windows 8.1 x64. After downloading 3 or 4 different versions of Cisco it keeps rising the same error concerning a DLL that is required. I'd really appreciate some advice or the reason why
    it keeps rising this error.
    Greetings,
    Cristina

    Hi,
    I can't find any compatible information with Windows 8 /8.1 about Cisco VPN client:
    http://software.cisco.com/download/release.html?mdfid=281940730&catid=268438162&os=Windows&softwareid=282364316&release=5.0.07.0410&rellifecycle=&relind=AVAILABLE&reltype=latest
    You can just check these steps, If following steps didn't work for you, please contact Cisco support for further help.
    On Windows 8.1, you will need to update the DNE first:
    Download: Ftp://files.citrix.com/dneupdate64.msi
    Install Cicso vpn client  5.0.07.0440-k9
    http://helpdeskpal.blogspot.ca/
    Please Note:  This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these
    sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to
    make sure that you completely understand the risk before retrieving any software from the Internet.
    Kate Li
    TechNet Community Support

  • Cisco VPN client x64 for win7 - will not install

    Hello guys,
    I have fresh windows 7 x64 installation and I try install Cisco VPN client (vpnclient-winx64-msi-5.0.07.0290-k9.exe). Installation ends with fatal error "Installation ended prematurely of an error". I red lot of 'step-by-step' how to solve this problem (run as administrator, even though that I'm administrator; UAC disabled; run in WinXP-mode; etc), without success.
    I tried run installation process from cmd with verbose logging "msiexec /i vpnclient_setup.msi /lv log.txt" (and other 'recomended' optional parameters). The same result - fatal error.
    Can anybody tell me where is the problem? (installation file is not corupted)
    Verbose log ends with this (whole log is attached):
    <cut>
    Action ended 22:35:25: WiseNextDlg. Return value 3.
    DEBUG: Error 2896:  Executing action WiseNextDlg failed.
    Internal Error 2896. WiseNextDlg
    Action ended 22:35:25: Welcome_Dialog. Return value 3.
    MSI (c) (70:2C) [22:35:25:997]: Doing action: Fatal_Error
    Action start 22:35:25: Fatal_Error.
    MSI (c) (70:2C) [22:35:25:998]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
    MSI (c) (70:18) [22:35:26:725]: Doing action: WiseCleanup
    Action start 22:35:26: WiseCleanup.
    MSI (c) (70:1C) [22:35:26:736]: Invoking remote custom action. DLL: C:\Users\kyrcm\AppData\Local\Temp\MSI2023.tmp, Entrypoint: Cleanup
    Action ended 22:35:26: WiseCleanup. Return value 1.
    Action ended 22:35:26: Fatal_Error. Return value 2.
    Action ended 22:35:26: INSTALL. Return value 3.
    MSI (c) (70:2C) [22:35:26:791]: Destroying RemoteAPI object.
    MSI (c) (70:4C) [22:35:26:792]: Custom Action Manager thread ending.
    === Logging stopped: 4. 10. 2010  22:35:26 ===
    MSI (c) (70:2C) [22:35:26:794]: Note: 1: 1708
    MSI (c) (70:2C) [22:35:26:794]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
    </cut>
    thanks,
    martin

    LOG:
    === Verbose logging started: 13.10.2010  14:58:45  Build type: SHIP UNICODE 5.00.7600.00  Calling process: C:\Windows\SysWOW64\msiexec.exe ===
    MSI (c) (48:6C) [14:58:45:636]: Font created.  Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
    MSI (c) (48:6C) [14:58:45:636]: Font created.  Charset: Req=0, Ret=0, Font: Req=, Ret=Arial
    MSI (c) (48:AC) [14:58:45:657]: Resetting cached policy values
    MSI (c) (48:AC) [14:58:45:657]: Machine policy value 'Debug' is 0
    MSI (c) (48:AC) [14:58:45:657]: ******* RunEngine:
               ******* Product: vpnclient_setup.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (48:AC) [14:58:45:666]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi' against software restriction policy
    MSI (c) (48:AC) [14:58:45:683]: Note: 1: 2262 2:  DigitalSignature 3: -2147287038
    MSI (c) (48:AC) [14:58:45:683]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is not digitally signed
    MSI (c) (48:AC) [14:58:45:685]: SOFTWARE RESTRICTION POLICY: C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi is permitted to run at the 'unrestricted' authorization level.
    MSI (c) (48:AC) [14:58:45:738]: Cloaking enabled.
    MSI (c) (48:AC) [14:58:45:738]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:AC) [14:58:45:744]: End dialog not enabled
    MSI (c) (48:AC) [14:58:45:744]: Original package ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
    MSI (c) (48:AC) [14:58:45:744]: Package we're running from ==> C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    MSI (c) (48:AC) [14:58:45:749]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (48:AC) [14:58:45:753]: MSCOREE not loaded loading copy from system32
    MSI (c) (48:AC) [14:58:45:755]: Machine policy value 'TransformsSecure' is 0
    MSI (c) (48:AC) [14:58:45:755]: User policy value 'TransformsAtSource' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisablePatch' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableLUAPatching' is 0
    MSI (c) (48:AC) [14:58:45:756]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: looking for appcompat database entry with ProductCode '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    MSI (c) (48:AC) [14:58:45:756]: APPCOMPAT: no matching ProductCode found in database.
    MSI (c) (48:AC) [14:58:45:757]: Transforms are not secure.
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\log.txt'.
    MSI (c) (48:AC) [14:58:45:757]: Command Line: CURRENTDIRECTORY=C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9 CLIENTUILEVEL=0 CLIENTPROCESSID=7496
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{A8E53AA2-297F-4262-9996-753440EF4AB0}'.
    MSI (c) (48:AC) [14:58:45:757]: Product Code passed to Engine.Initialize:           ''
    MSI (c) (48:AC) [14:58:45:757]: Product Code from property table before transforms: '{467D5E81-8349-4892-9E81-C3674ED8E451}'
    MSI (c) (48:AC) [14:58:45:757]: Product Code from property table after transforms:  '{467D5E81-8349-4892-9E81-C3674ED8E451}'
    MSI (c) (48:AC) [14:58:45:757]: Product not registered: beginning first-time install
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (c) (48:AC) [14:58:45:757]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (c) (48:AC) [14:58:45:757]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (48:AC) [14:58:45:757]: Adding new sources is allowed.
    MSI (c) (48:AC) [14:58:45:757]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:757]: Package name extracted from package path: 'vpnclient_setup.msi'
    MSI (c) (48:AC) [14:58:45:757]: Package to be registered: 'vpnclient_setup.msi'
    MSI (c) (48:AC) [14:58:45:758]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'DisableMsi' is 0
    MSI (c) (48:AC) [14:58:45:758]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (c) (48:AC) [14:58:45:758]: User policy value 'AlwaysInstallElevated' is 0
    MSI (c) (48:AC) [14:58:45:758]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (c) (48:AC) [14:58:45:758]: Running product '{467D5E81-8349-4892-9E81-C3674ED8E451}' with elevated privileges: Product is assigned.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '0'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '7496'.
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:758]: TRANSFORMS property is now:
    MSI (c) (48:AC) [14:58:45:758]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
    MSI (c) (48:AC) [14:58:45:758]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Favorites
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Documents
    MSI (c) (48:AC) [14:58:45:759]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Templates
    MSI (c) (48:AC) [14:58:45:760]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Local
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Pictures
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (48:AC) [14:58:45:761]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (c) (48:AC) [14:58:45:762]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (c) (48:AC) [14:58:45:763]: SHELL32::SHGetFolderPath returned: C:\Users\andrea\Desktop
    MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (c) (48:AC) [14:58:45:764]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (c) (48:AC) [14:58:45:765]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting AdminUser property to 1 because this is the client or the user has already permitted elevation
    MSI (c) (48:AC) [14:58:45:769]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'CIO'.
    MSI (c) (48:AC) [14:58:45:769]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Accenture'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\vpnclient_setup.msi'.
    MSI (c) (48:AC) [14:58:45:769]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
    MSI (c) (48:AC) [14:58:45:769]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\andrea\Downloads\Cisco VPN client\NEW\vpnclient-winx64-msi-5.0.07.0290-k9\'.
    MSI (c) (48:6C) [14:58:45:770]: PROPERTY CHANGE: Adding VersionHandler property. Its value is '5.00'.
    === Logging started: 13.10.2010  14:58:45 ===
    MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2205 2:  3: PatchPackage
    MSI (c) (48:AC) [14:58:45:776]: Machine policy value 'DisableRollback' is 0
    MSI (c) (48:AC) [14:58:45:776]: User policy value 'DisableRollback' is 0
    MSI (c) (48:AC) [14:58:45:776]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
    MSI (c) (48:AC) [14:58:45:776]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (48:AC) [14:58:45:777]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding SHIMFLAGS property. Its value is '512'.
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (c) (48:AC) [14:58:45:777]: Doing action: INSTALL
    Action start 14:58:45: INSTALL.
    MSI (c) (48:AC) [14:58:45:777]: UI Sequence table 'InstallUISequence' is present and populated.
    MSI (c) (48:AC) [14:58:45:777]: Running UISequence
    MSI (c) (48:AC) [14:58:45:777]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.
    MSI (c) (48:AC) [14:58:45:778]: Doing action: WiseStartup
    Action start 14:58:45: WiseStartup.
    MSI (c) (48:AC) [14:58:45:778]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseStartup'
    MSI (c) (48:8C) [14:58:45:791]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8E45.tmp, Entrypoint: Startup
    MSI (c) (48:B0) [14:58:45:793]: Cloaking enabled.
    MSI (c) (48:B0) [14:58:45:793]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:B0) [14:58:45:793]: Connected to service for CA interface.
    Action ended 14:58:45: WiseStartup. Return value 1.
    MSI (c) (48:AC) [14:58:45:926]: Doing action: LaunchConditions
    Action start 14:58:45: LaunchConditions.
    Action ended 14:58:45: LaunchConditions. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLDIR
    Action start 14:58:45: SetDLLDIR.
    MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLDIR'
    MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLDIR property. Its value is '{467D5E81-8349-4892-9E81-C3674ED8E451}'.
    Action ended 14:58:45: SetDLLDIR. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: SetDLLLOC
    Action start 14:58:45: SetDLLLOC.
    MSI (c) (48:AC) [14:58:45:927]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetDLLLOC'
    MSI (c) (48:AC) [14:58:45:927]: PROPERTY CHANGE: Adding DLLLOC property. Its value is 'C:\Users\ANDREA\AppData\Local\Temp\{467D5E81-8349-4892-9E81-C3674ED8E451}\'.
    Action ended 14:58:45: SetDLLLOC. Return value 1.
    MSI (c) (48:AC) [14:58:45:927]: Doing action: CsCa_CopyInstHelperDll
    Action start 14:58:45: CsCa_CopyInstHelperDll.
    MSI (c) (48:AC) [14:58:45:928]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCa_CopyInstHelperDll'
    MSI (c) (48:DC) [14:58:45:939]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8EE2.tmp, Entrypoint: f0
    MSI (c) (48!40) [14:58:45:960]: PROPERTY CHANGE: Adding CsProp_CopyInstHelperDll property. Its value is '1'.
    Action ended 14:58:45: CsCa_CopyInstHelperDll. Return value 1.
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: ClearDisableUAP (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_NTNotSupported1 (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: CsCaErr_Win64BitNotSupported2 (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchMode (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Skipping action: SetPatchReinstallMode (condition is false)
    MSI (c) (48:AC) [14:58:45:961]: Doing action: CsCaDll_AreWeInstalled1
    Action start 14:58:45: CsCaDll_AreWeInstalled1.
    MSI (c) (48:AC) [14:58:45:961]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CsCaDll_AreWeInstalled1'
    MSI (c) (48:04) [14:58:45:972]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI8F02.tmp, Entrypoint: f2
    MSI (c) (48!C0) [14:58:45:997]: PROPERTY CHANGE: Adding CLIENT_INSTALLED property. Its value is '0'.
    Action ended 14:58:45: CsCaDll_AreWeInstalled1. Return value 1.
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_AreWeInstalled (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaProp_SetLegacyClient2Unity (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Skipping action: CsCaDll_ClientAlreadyInstalledOnVista (condition is false)
    MSI (c) (48:AC) [14:58:45:998]: Doing action: Setup_Dialog
    Action start 14:58:45: Setup_Dialog.
    MSI (c) (48:AC) [14:58:45:999]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Setup_Dialog'
    Info 2898. For MSSansSerif8 textstyle, the system created a 'MS Sans Serif' font, in 1 character set, of 13 pixels height.
    Info 2898. For Arial10 textstyle, the system created a 'Arial' font, in 1 character set, of 16 pixels height.
    Info 2898. For Arial14 textstyle, the system created a 'Arial' font, in 1 character set, of 22 pixels height.
    Action ended 14:58:46: Setup_Dialog. Return value 1.
    MSI (c) (48:AC) [14:58:46:030]: Doing action: FindRelatedProducts
    Action start 14:58:46: FindRelatedProducts.
    MSI (c) (48:AC) [14:58:46:031]: Note: 1: 2262 2: Upgrade 3: -2147287038
    Action ended 14:58:46: FindRelatedProducts. Return value 1.
    MSI (c) (48:AC) [14:58:46:031]: Doing action: AppSearch
    Action start 14:58:46: AppSearch.
    MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (c) (48:AC) [14:58:46:032]: Note: 1: 2262 2: CompLocator 3: -2147287038
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DNE\Parameters\Order 3: 2
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: IniLocator 3: -2147287038
    MSI (c) (48:AC) [14:58:46:033]: Note: 1: 2262 2: DrLocator 3: -2147287038
    Action ended 14:58:46: AppSearch. Return value 1.
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPSearch (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: CCPDialog (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Skipping action: RMCCPSearch (condition is false)
    MSI (c) (48:AC) [14:58:46:033]: Doing action: ValidateProductID
    Action start 14:58:46: ValidateProductID.
    Action ended 14:58:46: ValidateProductID. Return value 1.
    MSI (c) (48:AC) [14:58:46:033]: Doing action: CostInitialize
    Action start 14:58:46: CostInitialize.
    MSI (c) (48:AC) [14:58:46:034]: Machine policy value 'MaxPatchCacheSize' is 10
    MSI (c) (48:AC) [14:58:46:035]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:036]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
    Action ended 14:58:46: CostInitialize. Return value 1.
    MSI (c) (48:AC) [14:58:46:036]: Doing action: FileCost
    Action start 14:58:46: FileCost.
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MsiAssembly 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: MoveFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: IniFile 3: -2147287038
    MSI (c) (48:AC) [14:58:46:037]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    Action ended 14:58:46: FileCost. Return value 1.
    MSI (c) (48:AC) [14:58:46:038]: Doing action: IsolateComponents
    Action start 14:58:46: IsolateComponents.
    MSI (c) (48:AC) [14:58:46:040]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2262 2: IsolatedComponent 3: -2147287038
    MSI (c) (48:AC) [14:58:46:041]: Note: 1: 2205 2:  3: Patch
    Action ended 14:58:46: IsolateComponents. Return value 1.
    MSI (c) (48:AC) [14:58:46:041]: Doing action: CostFinalize
    Action start 14:58:46: CostFinalize.
    MSI (c) (48:AC) [14:58:46:041]: PROPERTY CHANGE: Adding OutOfDiskSpace property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding OutOfNoRbDiskSpace property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceAvailable property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRequired property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding PrimaryVolumeSpaceRemaining property. Its value is '0'.
    MSI (c) (48:AC) [14:58:46:042]: Note: 1: 2205 2:  3: Patch
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WWWROOT property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding GAC property. Its value is 'C:\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding System16Folder property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Drivers property. Its value is 'C:\Windows\system32\Drivers\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding WinSxS property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding ProfilesFolder property. Its value is 'C:\Windows\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems_VPN_Client property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\'.
    MSI (c) (48:AC) [14:58:46:042]: PROPERTY CHANGE: Adding Cisco_Systems property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D property. Its value is 'C:\Program Files\Common Files\Deterministic Networks\DNE\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93 property. Its value is 'C:\Program Files\Common Files\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR2 property. Its value is 'C:\Program Files (x86)\VPN Client\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR1 property. Its value is 'C:\Program Files (x86)\Cisco Systems\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding INSTALLDIR property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding updates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\updates\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding TempInstall property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Resources property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Profiles property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Logs property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding include property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\include\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Certificates property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding accessible property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Setup property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\'.
    MSI (c) (48:AC) [14:58:46:043]: PROPERTY CHANGE: Adding Languages property. Its value is 'C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\'.
    MSI (c) (48:AC) [14:58:46:043]: Target path resolution complete. Dumping Directory table...
    MSI (c) (48:AC) [14:58:46:043]: Note: target paths subject to change (via custom actions or browsing)
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TARGETDIR    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WWWROOT    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: GAC    , Object: C:\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: MyPicturesFolder    , Object: C:\Users\andrea\Pictures\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonAppDataFolder    , Object: C:\ProgramData\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WindowsFolder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System16Folder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TemplateFolder    , Object: C:\ProgramData\Microsoft\Windows\Templates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AdminToolsFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: System64Folder    , Object: C:\Windows\system32\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Drivers    , Object: C:\Windows\system32\Drivers\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: WinSxS    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SystemFolder    , Object: C:\Windows\SysWOW64\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FontsFolder    , Object: C:\Windows\Fonts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempFolder    , Object: C:\Users\ANDREA\AppData\Local\Temp\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProfilesFolder    , Object: C:\Windows\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: AppDataFolder    , Object: C:\Users\andrea\AppData\Roaming\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: FavoritesFolder    , Object: C:\Users\andrea\Favorites\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: NetHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: DesktopFolder    , Object: C:\Users\Public\Desktop\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: RecentFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Recent\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramMenuFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems_VPN_Client    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: StartupFolder    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Cisco_Systems    , Object: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Cisco Systems\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PersonalFolder    , Object: C:\Users\andrea\Documents\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: SendToFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\SendTo\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: PrintHoodFolder    , Object: C:\Users\andrea\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: LocalAppDataFolder    , Object: C:\Users\andrea\AppData\Local\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFiles64Folder    , Object: C:\Program Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_CFDetNet.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNCF.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: D64_DNE.BEE04CD6_610D_4F5B_AC11_6AD2E290CC1D    , Object: C:\Program Files\Common Files\Deterministic Networks\DNE\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFiles64Folder.0525718E_E263_4E57_A46E_C584C25A7F93    , Object: C:\Program Files\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: ProgramFilesFolder    , Object: C:\Program Files (x86)\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: CommonFilesFolder    , Object: C:\Program Files (x86)\Common Files\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR2    , Object: C:\Program Files (x86)\VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR1    , Object: C:\Program Files (x86)\Cisco Systems\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: INSTALLDIR    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: updates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\updates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: TempInstall    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\TempInstall\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Resources    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Resources\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Profiles    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Profiles\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Logs    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Logs\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: include    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\include\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Certificates    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Certificates\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: accessible    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\accessible\
    MSI (c) (48:AC) [14:58:46:043]: Dir (target): Key: Setup    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Setup\
    MSI (c) (48:AC) [14:58:46:044]: Dir (target): Key: Languages    , Object: C:\Program Files (x86)\Cisco Systems\VPN Client\Languages\
    MSI (c) (48:AC) [14:58:46:045]: Note: 1: 2262 2: RemoveFile 3: -2147287038
    Action ended 14:58:46: CostFinalize. Return value 1.
    MSI (c) (48:AC) [14:58:46:045]: Doing action: MigrateFeatureStates
    Action start 14:58:46: MigrateFeatureStates.
    Action ended 14:58:46: MigrateFeatureStates. Return value 0.
    MSI (c) (48:AC) [14:58:46:047]: Doing action: SetWizardProperty1
    Action start 14:58:46: SetWizardProperty1.
    MSI (c) (48:AC) [14:58:46:048]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetWizardProperty1'
    MSI (c) (48:AC) [14:58:46:048]: PROPERTY CHANGE: Adding WiseCurrentWizard property. Its value is 'Welcome_Dialog'.
    Action ended 14:58:46: SetWizardProperty1. Return value 1.
    MSI (c) (48:AC) [14:58:46:048]: Doing action: Welcome_Dialog
    Action start 14:58:46: Welcome_Dialog.
    MSI (c) (48:AC) [14:58:46:049]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Welcome_Dialog'
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: DuplicateFile 3: -2147287038
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2262 2: ReserveCost 3: -2147287038
    MSI (c) (48:2C) [14:58:46:068]: Note: 1: 2205 2:  3: _RemoveFilePath
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: TypeLib 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:075]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying CostingComplete property. Its current value is '0'. Its new value: '1'.
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: BindImage 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: ProgId 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: PublishComponent 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: SelfReg 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Extension 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Font 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: Note: 1: 2262 2: Class 3: -2147287038
    MSI (c) (48:2C) [14:58:46:076]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceAvailable property. Its current value is '0'. Its new value: '60293640'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRequired property. Its current value is '0'. Its new value: '50274'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Modifying PrimaryVolumeSpaceRemaining property. Its current value is '0'. Its new value: '60243366'.
    MSI (c) (48:2C) [14:58:46:077]: PROPERTY CHANGE: Adding PrimaryVolumePath property. Its value is 'C:'.
    MSI (c) (48:6C) [14:58:46:746]: Doing action: WiseNextDlg
    Action start 14:58:46: WiseNextDlg.
    MSI (c) (48:6C) [14:58:46:746]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseNextDlg'
    Action ended 14:58:46: WiseNextDlg. Return value 3.
    DEBUG: Error 2896:  Executing action WiseNextDlg failed.
    Internal Error 2896. WiseNextDlg
    Action ended 14:58:46: Welcome_Dialog. Return value 3.
    MSI (c) (48:AC) [14:58:46:753]: Doing action: Fatal_Error
    Action start 14:58:46: Fatal_Error.
    MSI (c) (48:AC) [14:58:46:754]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'Fatal_Error'
    MSI (c) (48:6C) [14:58:47:418]: Doing action: WiseCleanup
    Action start 14:58:47: WiseCleanup.
    MSI (c) (48:6C) [14:58:47:418]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'WiseCleanup'
    MSI (c) (48:40) [14:58:47:445]: Invoking remote custom action. DLL: C:\Users\ANDREA\AppData\Local\Temp\MSI94AE.tmp, Entrypoint: Cleanup
    Action ended 14:58:47: WiseCleanup. Return value 1.
    Action ended 14:58:47: Fatal_Error. Return value 2.
    Action ended 14:58:47: INSTALL. Return value 3.
    MSI (c) (48:AC) [14:58:47:467]: Destroying RemoteAPI object.
    MSI (c) (48:B0) [14:58:47:487]: Custom Action Manager thread ending.
    === Logging stopped: 13.10.2010  14:58:47 ===
    MSI (c) (48:AC) [14:58:47:488]: Note: 1: 1708
    MSI (c) (48:AC) [14:58:47:488]: Product: Cisco Systems VPN Client 5.0.07.0290 -- Installation operation failed.
    MSI (c) (48:AC) [14:58:47:489]: Windows Installer installed the product. Product Name: Cisco Systems VPN Client 5.0.07.0290. Product Version: 5.0.7. Product Language: 1033. Manufacturer: Cisco Systems, Inc.. Installation success or error status: 1603.
    MSI (c) (48:AC) [14:58:47:491]: Grabbed execution mutex.
    MSI (c) (48:AC) [14:58:47:491]: Cleaning up uninstalled install packages, if any exist
    MSI (c) (48:AC) [14:58:47:493]: MainEngineThread is returning 1603
    === Verbose logging stopped: 13.10.2010  14:58:47 ===

  • I cannot install Cisco VPN Client 64-bit in windows 8

    Hi
    I bought new laptop which is preinstalled with widows 8 EM OS.. But for my usage i need to install cisco vpn client (64-bit version) software in my windows 8 EM OS.. which i cannot proceed actually because of the following error :
    Error 28000 : Before installing the cisco systems vpn client 5.0.7.0290, you must uninstall the previous version of cisco systems vpn client 5.0.7.0290, using the Add/Remove program files option in the control panel, then restart your system
    Following the above popup again a popup prompts displaying :
    I have tried to uninstall the program from control panel but i could not find vpn client installed in my system at all... Please give me suggestion how to uninstall and install the new one..
    Could you please advise how i can resolve the above issue and setup Cisco vpn client in my windows 8 OS? your reply is more worthy to carry on my work...

    Hello,
    The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application. If you have a question about another technology (such as Windows), you can ask in another forum. If you're unsure which forum, a Bing search often works the fastest or ask
    here: http://social.microsoft.com/Forums/en-US/whatforum/threads
    However, I'd ask in the
    Windows 8 forum on Microsoft Community.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Unable to install Cisco VPN Client on Windows 7

    Hello,
    After a successfull uninstallation of Cisco VPN version 4. I try to install Cisco VPN Client version 5.0.07.0290.
    But after launching vpnclient_setup.msi, the wizard is starting. When I click on Next button, I have the following message: "installation ended prematurely because of an error".
    In attachment, I add the details of the error find in the windows logs (logError.txt) and the logs generated from MSI installer in verbose mode (log2.txt).
    My computer is a lenovo W500 with Windows 7 64 bits and 4 GB of memory (compliant with the Cisco VPN Client requirements).
    I have administrator privileges on this computer.
    Please help me !
    I need to use it to connect to my company network.
    Thanks in advance.
    BR
    Jerome

    You should be able to install the 64 bit version of the Cisco VPN software
    Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
    Using Shrew VPN is a workaround more than a solution / answer to this issue.
    You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
    http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
    If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
    MicrosoftFixit50842.msi

  • Cisco VPN client install fails with Error 1722 on Windows 7

    Hi,
    I am having issues with laptops upgraded from Vista to Windows 7.
    Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290.  These laptops also have Juniper Network Connect 6.5 and Citrix web client installed.  The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
    I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working.  Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
    I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful.  Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly.  This also fails to reinstall after being removed.
    I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client.  I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
    On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
    On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
    What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
    Anything else I can do to troubleshoot this issue?
    Cheers,
    James

    You should be able to install the 64 bit version of the Cisco VPN software
    Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
    You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
    http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
    If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
    MicrosoftFixit50842.msi
    (Using Shrew VPN is a possible workaround.)

  • Failed to install Cisco VPN client 5.0.07.0440 on win 7 64bit [Error 1722]

    Hi Gurus,when I tried to install Cisco VPN Client 5.0.07.0440 on Win 7 64bit, the system would pop up an Error 1722( Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) at the last stage of copying files. Then it would roll back .
    I had tried to clean the temp files, restart windows installer services, and also re-register the MSIEXEC file. However, it would still pop up the error during the installation. For our company, it is a common issue. So, could you please offer me some advice on this?

    Thank you for your reply.
    I had checked the software again and found out.
    1. The MSI installer package is fine, because I can install the software on another PC.
    2. It is not like that, because I can start the installation procedure and run it smoothly until on the 88% of copying files.
    For now, I had only found this issue on one PC.
    Thanks.

  • Cisco VPN Client wont install Error 1406

    Hello
    I am installing Cisco VPN Client on my Windows 7 32-bit  laptop but it doesn't work.
    I have downloaded VPN Client ver "vpnclient-win-msi-5.0.07.0410-k9" which is supposed to be assigned for Win 32 bit but i get a lot of error like his:
    "Error 1406. Could not write value Maximum Plugins to key \System\Current\Controlset\Services\DNE\Parameters
    Verify that you have sufficient access to that key or contact your support personnel.
    I have tried a lot of suggestions from the internet but it doesn't seem to work. Please help!

    Thank you so much for your response, John.
    Yes, i have clicked on "Ignore", however, i receve the same error message for a different address (\System\Current\Controlset\Services\DNE\Parameters) and the Error nuimber changes. It goes from 1401 to 1406.
    I Keep Ignoring those error messages but i do get more than 50 of them. And after ignoring a bit more, it gives me some messag stating that "The installation could not be performed" So my only option at that time is "Abort"
    :S

  • Since I upgraded to Lion, my RSA securid token and Cisco VPN client doesn't work any longer. Anyone have suggestions on how to fix that?

    Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?

    .

  • Cisco VPN Client causes blue screen crash on WindowsXP Pro (Satellite M30)

    Hi there,
    I've got a Satellite Pro M30 running Windows XP Professional.
    After starting a vpn Tunnel via a Cisco VPN Client (Version 4.6 and 4.7) the system crashes with a blue screen.
    I can see that the key exchange is successful, but immediatly after the vpn connection gets established Windows XP crashes with a blue screen.
    Has anyone an idea, how to solve this problem?
    Maybe by device driver update? And if so, which driver should be updated?
    Kind regards,
    Thorsten

    Hi R2D2 (and anyone else)!
    1st of all (concerning your link) - I'm not using the wireless adapter.
    I am connectet via 100Mbit via network-cable to my hub (all RJ45 TP Cat.5)
    I found several other Notebook users by google'ing who have the same problem different vpn-clients but most of them with a centrino processor inside the notebook.
    Almost all of them solved the problem by installing new drivers. But I can't use driver-patches from other Notebook to fix my Toshiba Drivers.
    What could help is information about which driver is responsible for the crash by vpn clients on centrino notebooks. Maybe there is an Intel driver for it, but when I do not know which one causes the problem it's like seeking a needle in a haystack... :(
    Disabling ALL other network devices (wireless, 1394-network adapter, modem, etc.) did not solve the problem.
    I used the Cisco VPN clients several times on my old Compaq Notebook without any problems, but here it just doesn't work.
    An idea which driver should be updated is kindly welcome!
    Thank you, Thorsten

Maybe you are looking for

  • FI PCA Difference in Stock A/c

    Hi There is a difference between the GL account (FS10N run for company code & business area) and the profit centre report as at last financial period. I have carried out the following steps in order to clarify. Via CSKS (cost centre master) table I s

  • Restricting user exit ZXEDFU02 to one customer in WE20

    I'm new to SAP. I've just written a code in user exit 002 (include zxedfu02) for the bill-to party invoice IDOC generation (FUNCTION IDOC_OUTPUT_INVOIC). My code is working perfectly. The only problem is I would like to restrict the use of this user

  • Function module/BDC/BAPI for Component allocation operation wise

    Dear Experts, I need your help on Component allocation in Routing (CA02) per opertion wise. Currently we are assigning the Component individually per operation manually The problem is if a BOM is having 500 Components/Materials and there are 10 opera

  • Credit Memo's

    Dear Friends, Can someone clarify me If Credit Memo's need to be created with reference to the "Credit Memo Request Only" or they can even be created with reference to the existing orders with order type "OR" ? Thanks Krishna

  • Table with column group (one column) - next row is showing on new page instead of below previous row

    I am creating new table. My goal is to display some text in few lines like this: "AAAAAAAA"           "BBBBBBBB"           "CCCCCCCCC"      "DDDDDDD"           "EEEEEEEE" Actually the next row (with "DD" and "EE" values) is not displayed below first