Has anyone installed the new firmware?

Has anyone installed the new firmware yet? And have you noticed any issues with it? I'm weary of installing Apple's firmware updates after how terrible the last one was (I'm sure everyone remembers the hdd hangs). Also, Apple's trackpad update was terrible as well for the first few weeks it was out.

Because I was one of the users affected last time.
http://discussions.apple.com/message.jspa?messageID=10416721#10416721
Not just a tiny amount of people. Lots of people had this issue. Firmware downgrade is what solved it, until Apple released an upgrade of the upgrade. I just wanted to check if anyone was having issues with this firmware before I upgraded.
And I'm not sure why people are getting so offended. It's a simple question of "did upgrading to the new firmware screw up your computer", and requires a yes or a no answer. The last two times I installed an update it messed with my computer, so it makes sense for me to be weary. You would be as well if you were in the same situation. And I have not yet heard anything about this firmware, but I haven't had time to check out what people have said. I'm in med school and I'm usually fairly busy.

Similar Messages

Has anyone installed the new galaxy s3 update?

Just curious if anyone has installed the software update for the Samsung Galaxy S3 and if they ran into any issues?

Installed fine. However, I was disappointed to see it was not KitKat 4.4. Otherwise, no problems here.
Cheers!
- Lou

Has anyone installed the new update to Itunes 7.3.1 sucessfully?

I know people complain more often than they say thanks but having experienced the problems upgrading to 7.3.0 and resolving them with the help of this discussion forum I am hesitant to do another update for fear that I will lose more than I gain.
So have people installed the latest update and been successful? Or were there problems for everyone?
HP 720n Windows XP

Troublefree upgrade from 7.3.0.x on an XP SP2 box, and two troublefree initial installs on a 32-bit Vista Ultimate box so far. (A separate set of issue on the Vista box required a restore from the the factory's recovery partition, hence the two different initial installs on the same Vista box.)

Has anyone received the new update for the X6?

has anyone received the new update for the X6 with the updated browser? what is the firmware version?
Greece Nokia X6 RM-559 v40.0.002

I agree with Vinimutta!!
*slide to unlock with digital clock & sms & missed call notification
*support for homescreeen widgets
*qwerty keypad in portrait mode
every single update so far was pathetic attemp to fool us and make us happy.
there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
nokia promises alot in the new update, (browser, smiler and map)
hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
Why is it so hard to implement?
slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
its no like we are asking for impossible like continuous autofocus for video recording!!

Has Anyone Found the New Version of the iPod Radio Remote?

Hi,
Per iLounge, Apple released an updated ipod radio remote that has the most current version of Apple's ipod headphones as opposed to the shortened ones. I've checked on-line, Best Buy, Circuit City Compu World, Micro Center with no luck. I aslo tried the bricks-and-mortar Apple store...they looked at me like I had ten heads. Apparently they have the same sku as the old set.
I posted a question to Apple Support, but no response yet. Has anyone found the new version anywhere?
Thanks

Thanks. I've submitted requests to Apple to find out if or when they will be shipping the new remote, but they have not responded within their promoted 24-hour timeframe. I'll try to order from Apple directly and hope I get the new headphones too!
Thanks

Has anyone gotten the new 640x480 videos to work?

Has anyone gotten the new videos to transfer to their ipod? Mine keeps saying that they are not supported by ipod. Also does anyone know what bitrate for video is now supported?

On Tuesday I updated my 8 month old video iPod with 1.2. This morning I successfully transferred Mulan I downloaded off iTunes and played it out to a normal TV. I did not see any compression artifacts that I would normally see from the previously downloaded TV shows such as Battlestar Galactica. This probably means that it has the more updated resolution.
Core Duo Mini Mac OS X (10.4.7)

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?
If Yes, How is It?
This seems from what I've read at least to be a good or even great overclocker, It's too bad that It isn't a full ATX motherboard, Maybe If sales are good enough MSI will use this chipset on a Full size ATX motherboard one day. Of course It does have an Integrated ATI video card in It and It have as much as 128Mb ram for the pci-e built-in video or You could add a separate pci-e video card in the 16x slot. It's $94.00 right now on pricewatch.com of course.
http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb

Quote from: mamisano on 23-February-05, 12:27:21
Ordered one for a home workstation from ZipZoomFly.com. Also picked up a 3000+ and already have 1GB of Adata PC4000. Will be utilizing onboard video until I have the need/desire to upgrade to PCI-Express video card. Hard drive will be a new Maxtor 250GB ATA-133 16MB Cache that I picked up from CompUSA for $99/no rebates :D
I will post my thoughts after the system is together, should have parts by Thursday/Friday.
Well at least You aren't buying from Logic Circle Systems That place will ship incompatible ram that is Intel approved and say then It is You cpu that is at fault, I should know I'd bought zoom3's motherboard and some Wintec ram(Samsung chips ending in TCCC) and They said they were tested and AMD approved(They aren't, Wintrec is Junk on an AMD Platform), I now have a Corsair CMX512RE-3200LL Dimm and My cpus work fine at PC3200 speeds and above, Logic Circle Systems said was at fault. Logic Circle Systems is a bunch of Liars and are not trustworthy.

Has anyone seen the new Cygnett accessories range yet?

Has anyone seen the new range of iphone and ipad accessories from cygnett.com yet? I just saw some pretty cool looking cases displayed on slashgear this morning from the CES show.
what does anyone think?

Apple just announced an iPhone 4S. Same case, it appears, as the iPhone 4, but the A5 chip and other internal goodness. No mention yet of an "iPhone 5".

Has anyone gotten the new Iphone 5 yet

Has anyone received the new Iphone 5 yet in the preorder? I paid for mine on the prerder date and I still have no tracking number.

Pat,
Go to UPS website and clicl on "more options" under the tracking box.
Then, click on "Track by reference"
enterthe phone number Apple has on your account or enter your Apple order number but leave out the last two digits. (Include the "W" at the beginning of the number)

Has anyone installed the GIMP?

Has anyone installed the GIMP on their iBook? I have a couple questions because of the way their site is worded:
http://www.gimp.org/macintosh/
In the requirements section are they just explaining why it doens't run on version 9 or earlier? It almost makes it sound like you have to go download that stuff (which is why I feel stupid for asking this). :-/
This site, http://gimp-app.sourceforge.net/ , which is the first site they list on the places to get GIMP, makes it sound like the application there is all you have to download, except for the extra install from the OS X Install Disk. Would that be all I needed?
I'd love to have this program on my iBook, so if anyone who has installed it could walk me through it, that'd be great.
Thanks,
Mandy

Hi Mandy,
I myself have not tried GIMP.app because I have lost the urge to use X11. In order to use it, you will to download X11 from your OS X disk and install X11; not to be confused with X11SDK. I bet you can find a bunch of GIMP and X11 users in Mac OS X Technologies > Unix forum.
You may want to look at this previous post.
Jon
Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

How Do I Use my Creative Organizer after installing the new Firmware (Not Media Explor

Help me use my crap

I'll assume alot here,?but my guess is you installed the new playforsure firmware for the player. If that is the case then you will need the playforsure plug in for the Creative MediaSource Organizer. You can download it on this creative's site under downloads.

Has anyone gotten the new update for windows phone 928

Anyone gotten the new update for windows phone 928

You don't have to wait, you can get it now.
Get Windows Phone 8.1 now legitimately!

Has anyone used the new Panasonic HDC-HS300 camcorder with FCE4 yet?

I'm thinking of buying this new high definition camcorder, but would like to know whether anyone has used it: does the log/transfer manner of getting video into final cut espress work?
I'm also interested in whether anyone has used the new Canon LEGRIA HF S10, with the same question.
thanks,
Steve

Both of the cameras you provided links to should work fine with FCE. For the Canon and Panasonic cameras, you would use Log and Transfer to import the footage. This should work very smoothly as long as you shoot using 60i so it is compatible with the sequence in FCE. I use an AVCHD camcorder similar to the Canon you are looking at an it is working great for me.
Things to keep in mind:
1. Both HDV and AVCHD footage need to be converted to AIC in FCE upon capture/ingestion. FCE will do this automatically, but be prepared for large file sizes. A 15 minute project I created on my AVCHD camcorder at 1920x1080 took up about 15-20 GB of memory once converted to AIC.
2. If you get an HDV or DV camera you will use Capture, not Log and Transfer.
3. Becaues of the way AVCHD footage works, when FCE imports it the program creates intermediate frames between the ones the camera captures. This is normally OK but might be a problem for fast action shots.
4. As Ian said, unless you plan to invest in more expensive equipment the DVDs you burn will actually be SD, not HD. I do this in iDVD and I have always been happy with the results.
So I guess it is up to you: Do you prefer to shoot on tape or hard-drive, use firewire or USB to upload? If the answer is tape, firewire then HDV is for you. If hard-disc, USB, choose AVCHD. In the end it comes down to your personal preference. All of the cameras you have mentioned should be fine working with FCE.

Has anyone used the new 5K retina iMac with Lightroom

Has anyone used Lightroom with the new 5K Imac. If so any problems ?

Just bought one - arrives next week. From what i can tell it's should be the fastest mac for lightroom. Processor speed is most vital. Doesn't really use all the mac pro multiple cores as I understand 4 is plenty (correct me pls?) and 16Gb ram should hopefully do it. Getting a raid thunderbolt 2 drive for image storage which will daisy chain with my eizo monitor. Choose 3tb internal fusion as I understand full SSD doesn't really help too much. 2GB graphics plenty unless you're doing video maybe?.
Only issue is I have a series of archive 3TB firewire 800 drives which are daisy chained. the questions is how will these work with an adapter but this remains to be seen....

Has anyone installed the new firmware?

Similar Messages

Maybe you are looking for