Has anyone integrated OpenID into the Mac OS X Server Wiki and Blog?

I am currently working on integrating OpenID into the eXist Open Source XML Database (http://exist-db.org). As a separate topic, I was wondering if anyone has integrated OpenID into the Wiki, Blog and OpenDirectory.

do
you
have
any
adviceon
the
best
way
to
do
this?
or
can
you
guide
me
to
a
beginners
guide
on
how
to
set
up
a
Web
page?

Similar Messages

Has anyone ever plugged into the airport express to get online?

Want to plug my xbox 360 into the airport express to get online so I don't have to move anything around.
Right now my modem & router is in bedroom, & the airport express is in the living room (w/xbox and speakers) to extend wireless signal and throw music to speakers in living room.
I can move it, just lazy and then won't be able to use speakers, and don't want to buy xbox wireless adapter.....
It's already a bridge, it would make sense that I could plug in? maybe not ;}
airport express/ aluminum powerbook g4 Mac OS X (10.4.8)

If you have the AirPort Express Base Station (AX) set up as a remote base station in a WDS configuration, then, yes, you can connect the Xbox 360 to the AX's Ethernet port for Internet connectivity. If it's setup as a wireless client, then no.

Has anyone used any of the Mac cleanup programs?

What is the best Mac Clean up software. I have an Imac with the Mac OS X Lion 10.7.5 (11G63) intel. Thanks
[email protected]

A Basic Guide for Data Migration
If you are migrating a PowerPC (PowerMac) system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Note: if you are upgrading to a Mac with Mac OS X 10.7 (Lion) or later, or with the intent of upgrading to 10.7 or later anytime in the future, be aware that any applications that are not labelled Universal, or haven't been upgraded to Intel CPU compatibility will not run on Lion or later. Documents may migrate if an Intel native application exists that will open them, but applications that are PowerPC only will not. This user tip explains what else is needed for upgrading to Lion: https://discussions.apple.com/docs/DOC-2465.
This also means for any Mac model whose hardware or firmware that has been refreshed on or after July 20, 2011, you won't be able to install 10.6.8 or get Rosetta from it unless you follow a link at the end of this tip. It may be better to get a used or refurbished Mac that predates July 20, 2011. See the Snow Leopard tip on the bottom for which Macs support Rosetta, which in turn supports older PowerPC applications.
Both Leopard (10.5) , and Tiger (10.4.4 through 10.4.11, excluding 10.4.0, 10.4.1, 10.4.2, and 10.4.3) have PowerPC and Intel Mac support, and upgrading to either, this tip here, as well as links to my tip on Tiger and Leopard will help with your upgrade.
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire. You can also determine if you have Firewire by looking at this image of the ports typically found on a PowerMac G4 Firewire 800, which has two 6 pin Firewire 400 (IEEE 1394a) ports below the USB ports, and below that, a Firewire 800 (IEEE 1394b).
The 4 pin Firewire found on many camcorders is just a Firewire 400 port that is not powered by the computer. Cables exist that can convert between all three.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT
migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration
Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do
if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home/Library/Calendars (copy the whole folder)
/Home/Library/iTunes (copy the whole folder)
/Home/Library/Safari (copy the whole folder)
/Home/Library/Fonts
/Home/Library/Widgets
/Home/Library/Syndication (Tiger) or /Home/Library/PubSub (Leopard) <<< RSS
/Home/Library/Internet Plug-In
Credit goes to iBod for this information.
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Special instructions for those who have purchased Mac models that do not support Rosetta:
The newest (post 2010) Mac models run only Lion or Mountain Lion. They are not able to run Snow Leopard at all. However, you can still run PPC applications using Snow Leopard and Rosetta by intalling Snow Leopard as a virtual machine using Parallels. This is not an exercise for the truly inexperienced user, but it is completely doable provided you are willing to spend some money and some time. For complete instructions on what to do see https://discussions.apple.com/message/18280105#18280105. Although the instructions are keyed to Parallels 7, you should instead use the latest version, Parallels 8. (This information was contributed by user MlchaelLAX.)
Written by Kappy with additional contributions from a brody.

HT4528 has anyone been led into the middle of the woods by apple maps???

we were moving cross country and were led off of the interstate into a wooded subdivision that had NO business having a 26' uhaul on their roads. Luckily a home owner came out to ask us what we were doing there. Told them we were lost and he led us to town and a motel. I about went off a cliff, and the uhaul about rear ended me over the edge. All because of Apple Maps on my brand NEW apple iPhone 5c that was only days old. We were in a different state, city and town with three kids four dogs and it was dark. I talked with my family about this and apparently I am not the only one who has had problems with Apple Maps. It's a common problem. BEWARE of your use of APPLE MAPS!!!

mskiki2411 wrote:
BEWARE of your use of APPLE MAPS!!!
And beware of any other GPS map as well as they are not 100% accurate either; espcially in rural areas. Why people blindly follow a GPS instead of being aware of their surroundings and using common sense is beyond me.

When I plug my iPhone 4s into my PC, I get an error message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. Has anyone else run into this problem recently?

When I plug my iPhone 4s into my PC, I get a message that says iTunes needs a newer version of Apple Mobile Device Support. It wants me to uninstall both the AMDS and iTunes and then reinstall iTunes. iTunes won't recognize my phone and so I can't synch it. Has anyone else run into this problem recently and how did you resolve it? Thanks!

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

Has anyone else bought a refurbished mac, to still have all the apps belong to the old AppleID?

I just got my new MacBook Air that I purchased from Apple refurbished. I can not update any apps as it says my AppleID is not the purchaser. Has anyone else run into this issue? Support is telling me to do a full erase and reinstall. Shouldn't that have been done already? I go the new user welcome on start up and I have the only user account on the machine. Am wondering if this is a Yosemite bug?

if all those do not work then let's go step by step.
what's loading in your login items? - delete the ones you don't need.
open activity monitor and under all processes - see what's using most of your cpu's resources - % CPU.
highlight the one using the highest % CPU and hit quit process.
the go to disk utility - verify disk. then verify disk permissions. repair if needed.
when all done, restart your macbook and see if that speeds it back up.
good luck

I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac. I have purchased the dazzle and the specs seem to be for windows only. Has anyone used this product on mac?

I was advised to purchase dazzle video creator to move analog videos from an old sony camcorder to a mac. I have purchased the dazzle and the specs seem to be for windows only. Has anyone used this product on mac?

I am not certain, but I believe there is a version of Dazzle for the Mac. However, it is not the route I would chose.
You really need a proper analogue to digital converter, like the ADVC110, to connect to your camera via the usual RCA cables, and to your Mac via firewire.

HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

Have you tried calling Apple tech support?
http://www.apple.com/contact/

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

Has anyone managed to change the battery in a creative Zen MX

=i bought a 6gb zen MX? in November 2007 and have used it every day since. The battery is now in a sorry state and doesn't hold a charge for more than about 4 hours. After fully charging it, if you then leave it overnight the battery almost totally depletes. The battery is definitely a goner. Has anyone opened one of these players, changed the battery and then got the thing back together successfully? I've looked around on the net but can't find any info on how i might open the player to insert a new battery. Meanwhile i've bought a new Creative ZenMX but i prefer the old one with its dedicated slider for on/off and lock and it would be great if i could somehow get a new battery into it.
I still have my old Ceati've Zen Jukeboxes (30gb and 60gb) and i wore a couple of batteries out in those. But all you had to do was open the player and shove in a new battery. Shame that facility no longer exists in Creative's MP3 players.
Any help on the issue of replacing the battery in an MX would be much appreciated.

Re: has anyone managed to change the battery in a creative Zen MX%Thanks for the links Bertwin, much appreciated.
Now i have a problem in obtaining a replacement battery. Back in the day you could phone Creative (in Ireland) and order replacement batteries but alas, no longer. On the net you can easily find replacement batteries for every Creative player.....except for the Zen MX. ? The replacement x-fi battery looks similar? and has the same wire connections but it is 3.7v as opposed to 3.6v in the MX. Also the x-fi battery is rated at? 550mAh while the MX is rated at 0.55AH. (Though i guess that could mean they are the same capacity only it's written differently)
The Creative part number for the MX battery is BAC0603R79925 and the Creative Model No is : LPC6333445
If anyone knows where to obtain this battery please post.

Has anyone tried to get the customer_id/site_id in ireceivable module?

Has anyone tried to get the customer_id/site_id in ireceivable module? Please let me know which class to look into to get the cust_account_id and site_id/site_use_id in ireceivable module. We need to control the access in our custom pages based on the user access (at the customer account level or only at the customer site level).
Thanks,
AJ

I saw the set hibernet mode to 0 trick and it failed. Guess I can try 3 because reinstalling OS X did nothing but cost me another few hours and a little faith in Apple. Getting annoyed as I see how many people complain of the identical issue and the fixes are variable and random. Suggests to me that it is a major design flaw in the hardware and Apple got too cute with the just works idea and didn't put a damned power button on the display so there is no manual way to do it and no 'insert a pin here' type trick to reset the thing.
Asking for a refund tomorrow. Past the 14 days so maybe they'll say no but if so then every time this happens I will swap it out. At least then I know it is a three hour fix and as I was working on this for hours today it occurred to me that if the trick is to do 57 different things and maybe one will work then that is not why I made the switch to Apple. I could plug everything in on my PC and it all 'just worked'.
Really poor customer service - the support folks are very nice and I am sure they know that this is a systemic issue but aren't allowed to say so. Feeling pretty stupid for going on faith right about now.

Has anyone integrated Checkout by Amazon successfully?

http://services.amazon.com/amazon-payments/payment-features.html?ld=SCUSPAYGATE1013AS
Amazon provides 4 ways of integrating Checkout by Amazon (CBA) with online shops - HTML Button, Pre-Integrated Cart, Standard Checout and Inline Checkout. Has anyone integrated one of these options successfully? If so can you please share an example for that?
Also does anyone know if BC is planning to provide CBA as one of the payment gateway options?
Thanks

Too messy to do on the client side, it would be possible but it would have so many strings attached and you would have to save all your data outside of the BC e-commerce system unless you used the API to finalize the order.
But if you are going to use the API to finalize the order you would be better served do the entire thing in the API like Liam said.

Has anyone had any of the iLife programs crash on them? especially imovie 6

Has anyone had any of the iLife programs crash on them?
I have had my new intel imac 20" for 2 weeks now and i like it a lot...
except I have been getting crashes on imovie (especially), and garageband.
I have had about 10 crashes total so far in about 2 weeks.
Is this sound normal?
thanks, technoreid

How much spare hard disc space have you got? ..Could your disc be so clogged that there's no room for any more movie?
You'll need about 10% of your total hard disc space - e.g; 6GB for a 60GB hard disc - to be kept empty for your Mac to do its "housekeeping" (..creating temporary files, indexing things, and so on..) and iMovie footage uses about 13GB per hour of video.
So if you have a 60GB hard disc, and it's only got 15GB spare, then 6GB of that will really be needed by the Mac itself, giving you about 9GB of usable space, and if you import half an hour of video (6GB) and start cutting it around and editing the audio too, and duplicating a few clips, and adding stills, you're soon going to run out of space!
If your Mac's disc is almost full, you'll probably need to get an external FireWire disc ..say a 160GB or similar size.. then format it as 'Mac OS Extended' (..by selecting that add-on disc and using the 'Erase' tab in the Disk Utility program..) and then you can copy your project over to that new, empty disc, and continue editing it there.

Has anyone integrated OpenID into the Mac OS X Server Wiki and Blog?

Similar Messages

Maybe you are looking for