Has anyone managed to connect an encrypted hard drive to airport extreme?

I am using Hitachi 4TB drive formatted to Apple Encrypted format, requiring password.
The drive works fine on my MACs, when connecting it direclty via USB3 cable.
However, the drive cannot be configured using Airport Utility. The Partion remains invisble, despite me entering the encryption password into it...
My airtport extreme has the lastest firmware 7.7.2
Any ideas?

Yes there have been several posts about it here. HP does not have the caddy and connector you need but you can get it at www.newmodeus.com.
Buy it here

Similar Messages

Connecting a external hard drive to airport extreme

im having some issues here i just got the airport extreme and i got it set up then once i tried to plug in my external HD and i go into the airport utility to set it up. but it says there is no base station plugged in. and i try rescan and it still cant find it. so i unplug the HD and open up airport utility again and then my base is right there and i can change all the settings. so i cant use my HD on the airport extreme base station.
does anybody have any ideas, help, answers.
thanks

well it all of the sudden worked. i just stopped trying to get it to work came back the next day and presto it worked. huh.

How to connect a hard drive on Airport Extreme (second edition)

how to connect a hard drive on Airport Extreme (second edition)? Does it need a special format? It is now fromat on FAT32, but i don't see it ??

The USB port your Mac is high powered. The port on the AirPort Extreme is not.
So, it tends to be borderline as far as its ability to supply sufficient power to a hard drive...even if the hard drive has its own power supply.
Often, users...including me....need to use a powered USB hub when they attach any drive to the USB port on the AirPort Extreme.
You might want to give that a try. Double check to make sure that the drive is formatted in FAT32 as well, since Windows NTFS or exFAT will not work with the AirPort Extreme.
Powering down and restarting the entire network.....modem first, then router, etc.....is something that you would always want to do after any change or addition to a network.

How to deactivate a shared Hard drive on Airport Extreme - keeps sleeping

was curious if anyone one knows how to temporally deactivate a shared Hard drive on Airport Extreme - keeps sleeping every 30mins and have to wait 12 second for the drive to spin up and wait for the beach ball to stop spinning. Getting really aggravating.... Thanks

The external harddrive is NTFS format and someone from apple told me that it would have to be reformatted to be seen by the Extreme -- Needless to say with 33% of the hard drive filled, I do NOT want to reformat.
Unfortunately, HDDs attached to the USB port of the AirPort Extreme, cannot be recognized by the AirPort if formatted in NTFS. If you do not wish to reformat this drive, you will either have to use a different drive or connect this drive to a Windows PC for sharing on the network.
The AirPort can only share drives formatted in HFS+ or FAT32.

Can't add hard drive to Airport Extreme

I wanted to add an external hard drive to Airport Extreme and I can't get it to show up in my net work. If I go to the configuration program for Airport Extreme, I can see that the base station has identified that hard drive (a Lacie 750 mb drive). Any suggestions?
Message was edited by: Karlhan

I have the exact same problem with one twist I tried adding an 8gb memory stick instead of a spinning hard drive. Airport utility recognizes it but it does not show up on any of the computers.

Bonjour - Connect Windows 7 to external hard drive on Airport Extreme

I have to use a laptop with windows 7 for work and I want to back up to a hard drive that is connected to my airport extreme station. I downloaded the bonjour print services and I had the printer set up in a minute. I can't figure out how to connect to the external hard drives that are connected to the airport extreme station though?! Obviously bonjour print services is only helping you with the printer. I couldn't install an earlier version of bonjour for windows because of the bonjour print service installation.
Any ideas how I can connect to those external hard drives? Thanks!

Thank you. I probably should have figured that out myself, but this did the trick. I am also connecting a new hard drive to my airport extreme. The mac and pc don't see the drive because of the NTFS format. This hard drive will be used for PC business related files only, but I still want to access it using my wireless network. Paragon is supposed to do the trick. I am just wondering if paragon makes the harddrive useable for both, the pc and the mac.

Usb hard drive and AirPort Extreme

I have been using an external usb hard drive connected to my Airport Extreme to store music which is then picked up by a Sonos system to play music even when my iMac is switched off - has been working great. However I became aware recently (and I think this pre-dates upgrading my iMac to Mountain Lion) that my external hard drive no longer shows up as a shared drive within Finder. If I go into Airport Utility / Edit / Disks - 'enable file sharing' is checked. Disk Utility doesn't see the drive but I'm not sure that really means anything as a network drive rather than a drive connected directly to the iMac.
Has some recent upgrade disabled network drives on Airport Extreme's (ie assuming we are all now backing up to iCloud so don't need it)?
Thanks

OK, I feel silly on this one.
After looking for issues with the airport and not finding any and needing a file from my backup drive, I had to connect it up to my PC. That's when I found my solution.
The Drive I had connected had stopped responding. That's why the Airport was not showing it and not allowing connections. I had power cycled the drive a few times while testing, just not long enough. I unplugged the drive for 2 minutes, all cables, then reconnected. After about 5 minutes, the Airport was able to confirm the drive and turned the share back on.
Hope that helps.

External hard drive on Airport Extreme - how to eject it?

Hello: I just connected a UBS hard drive to the Airport Extreme and it works great. I just don't know how to eject it safely, as I would connecting it to my computer (drag to trash and it turns off). Can anyone let me know how to do this?
Thank you in advance!

Welcome to the disussions!
When you open the drive, it should appear as an icon on your desktop.
When you want to eject the drive, right click the drive icon on your desktop and then select "Eject xxxxx". Or, if you prefer you can simply drag the icon to the trash.

Trouble connecting external hard drive to AirPort Extreme

I now have my AirPort Extreme set up for my wireless network. But I have tried to connect my seagate 1TB powered external hard drive to the AirPort Extreme for file sharing via the USB port. But for some reason even though there's power to the hard drive it doesn't show up in airport utility or in my finder. Do you know how to fix this? It works perfectly fine and normal when I just plug the hard drive into one of my USB ports on my iMac. Can anyone help? Thanks

Connect the hard drive directly to your Mac and launch Disk Utility. Select the drive and click on the Repair Drive button. Once this has finished try connecting the drive again and then launch AirPort Utility and see if the drive shows up.
One thing I've noticed is that if the external drive has any directory errors it won't mount in AirPort.

Incompatibility Issues with connecting USB Hard Drive to Airport Extreme

Over the last few days i have been fiddling around with my new Airport Extreme Base Station N router. I can connect a printer and use the internet through it seamlessly. I can even share two of my hard drives through a USB hub, however, my Maxtor 500 gb One Touch 4 HDD will not connect with my macbook through AEBS. It is only this drive that is not working with AEBS and it is the one i need to be connected and sharing. If i plug my 500gb Maxtor directly into my macbook it works fine, i can read all the files. This drive is formated as Mac OS Extended (journaled).
I am about to give up on this because i have tried everything:
1. Reformatted HDD
2. Downgraded Firmware
3. Searched Forums for advice
4. Reconfigured AEBS in, i think, every way possible
So, these are most of the things ive tried and so far there is no solution in sight. I have one hypothesis: my particular HDD (Maxtor 500gb One Touch 4) is incompatible with AEBS at this time, but it is possible that a future firmware update could fix this.
Does anyone have any advice? I'm lost and disappointed. Please help, thanks.
Message was edited by: benjaminwooda

Chances are pretty good that the power draw of your external drive is just at the "tipping point" for what the USB port on the Extreme can deliver. Powered USB hubs are inexpensive and should help in this situation.

Can i connect hard drive to airport extreme in bridge mode

I just bought a hard drive and want have it connected to my airport extreme which is in bridge mode so that I can use it with U verse. Will I be able to backup my files on my macbook without connecting the usb on the hard drive to the macbook itself?

Will I be able to backup my files on my macbook without connecting the usb on the hard drive to the macbook itself?
This all depends on what you mean by backup your files.
Apple does not support Time Machine backups to a drive at the USB port of the AirPort Extreme, so if you are planning to use Time Machine, the better strategy would be to connect the drive directly to your Mac.
If you want to drag/drop or copy/paste regular data files to the hard drive, that should work OK
Remember that the drive should be formatted in Mac OS Extended (Journaled) as most store bought drives will come pre-formatted for Windows NTFS.
The USB port at the AirPort Extreme is under powered, so you almost always have to use a powered USB hub with a hard drive here....even if the drive has its own power supply.

Hard drive and airport extreme connection problem.

Hi folks,
I have an airport extreme and a WD 1TB pasport for mac hard drive. I had it connected for ages and used it to load movies onto to keep my macbook empty. I had no problems accessing it wirelessly through Finder until today when i configured the extreme to run at 5ghz. When i try to connect now, it tells me that the ip address is wrong but im connected to the extreme for internet. Any clues or solutions?

your Airport Extremes ip address is the red square, Then your going to copy that
So in the red box instead of Http:// we are going to put ftp:// then you should get
a pop up say connecting to server and I hope you do get that.

Connect to hard drive on Airport Extreme while on a different network?

Is it possible to connect to my external hard drive that I have plugged in at home, on my personal internet, through an airport extreme, when I am at school for example or somewhere else?

OK, then you can just set up Back to my Mac on your AirPort Extreme. Then, in the "Shared" area of the Finder, your AirPort Extreme will automagically appear, even when you aren't on your own network.
http://support.apple.com/kb/HT3486

Using an external hard drive with Airport Extreme

I'd like to use an external hard drive to store movies and music through my Airport Extreme. The drive is connected to a powered usb hub which is connected to the Extreme. I can see the drive in Airport Utility but I can't figure out how to use it.

Hi,
I have just tried to set up an Airport Extreme with an external hard drive at home. I have 4 computers connected to the "network" - an iMac, a MacBookPro and 2 x windows machines. A printer is connected wirelessly to the two Macs.
I cannot find the hard drive - I have tried the steps mentioned by Bob Timmons Mar 17 2010, but the only things I see under "Shared" in Finder are the iMac and the printer - not the Airport Extreme (seems odd??), not the windows machines, and most importantly, not the hard drive connected to the USB port on the Airport Extreme.
I therefore expect that the iMac and printer are connected wirelessly and directly, rather than through my network (& I'm happy for the printer to be connected this way, but I do need the PCs and the hard drive all networked).
According to my network connection, (in top bar on the screen) I am definitely connected to the network - yet nothing else shows in finder??
I do, however, see the USB hard Drive when I go into Finder>Applications>Utilities>AirportUtility.app, under my Airport Extreme >Disks. I've also gone through all the set up procedures for "File Sharing."
I have read other posts about formatting the hard drive ether FAT32 or NFTS - is this something I now need to do?? If so, which one should I use, and once I do it, will I then see it?
Presumably, in order to format the Hard Drive, I will need to disconnect it from the Airport Extreme, and connect it directly to one of the Macs too?
My apologies for so many questions, but this is all very technical stuff for the non-techie layperson.
Many thanks for any help anyone can provide on one or more of the questions / issues.
Martin

Adding external hard drive to airport extreme for time machine error

Hello,
I recently bought an airport extreme that I wanted to combine with an external hard drive in order to do wireless time machine backups. I hooked this up and the hard drive shows up in the devices menu.
However, when time machine starts to backup, I get the following error:
"The backup disk image “/Volumes/Blackmer External MyBook/Benjamin Crispell Blackmer’s MacBook Pro.sparsebundle” could not be created (error 1)."
When my computer is connected directly to the hard drive, it works fine.
Any ideas on how to fix this?
Thank you.

It is important to understand that Apple does not support Time Machine backups to a drive at the USB port of the AirPort Extreme. So, that may be an issue here.
Despite this, users try it anyway. Some appear to be successful for a time, some partially successful, some can't get it to work at all.
Even if it does appear to work initially, corruption issues may occur down the line without warning. Having tried this myself as a test a few times, I can attest to that.
If you want to try this anyway, the two important things to check are.....
The drive must be formatted in Mac OS Extended (Journaled). Other formats will not work
You almost always need to use a powered USB hub...even if the hard drive has its own power supply....because the USB port is under powered on the AirPort Extreme
You might also want to consider a secondary backup plan to protect your important files

Has anyone managed to connect an encrypted hard drive to airport extreme?

Similar Messages

Maybe you are looking for