Has anyone migrated Hyperion Reports/Analyzer 7.x to EPM 11.x?

I posed this question in the Essbase Forum by mistake, so, I'm reposting this here...
If anyone has done such a migration of Hyperion Reports 7.x or Hyperion Analyzer 7.x to EPM 11.1, could you please share with me the steps involved in this migration? We currently use NTLM authentication in the 7.x versions, and there a a few hundred Reports and Analyzer Presentations that I'ld like to migrate to EPM.
I have been doing a lot of searching, but haven't come across anything yet. Or maybe I'm just not getting it.
Thanks
Dan

Hi Dan R,
Were you able to figure out how to migrate Users from 7.x to 11 version ? Even we have lot of reports which use NTLM authentication and were not able to come up with a solution for it.
Thanks,
Chandra

Similar Messages

  • Migrating Hyperion Reports to OBIEE.

    Hi, I'm OBIEE analyst and I don't know so much about "Hyperion World".
    So, we need to migrate some Hyperion Reports (Web Analysis, Financial Reporting and Interative Reporting - modules) to OBIEE.
    I've been studing about the subject and I discovered that for Interactive Reporting Reports there are a tool called by Translation Workbench that migrate all Hyperion Reports to OBIEE, not simple like I said, but seems it works.
    So, for the other modules(Web Analysis and Financial Reporting) I didn't find out anything about them.
    Can someone help me?
    Tks,
    Guilherme

    Satya,
    Thanks for immediate response! But these two threads do not have what I want...
    I have some reports in three Hyperion modules:
    - Hyperion Web Analysis
    - Hyperion Interactive Reporting
    - Hyperion Financial Reporting
    So, I know that for Hyperion "IR", there is a tool called "Oracle Translation Workbench" that migrate "BQY" to OBIEE Repository and OBIEE Answers... But for "FR" and "WA" I didn't find out anything about migration to them.
    Tks!!
    Guilherme

  • Has anyone migrated existing file libraries into Final Cut Server?

    My company currently uses Virage to archive thousands of video clips. Currently we only archive proxies and keep a corresponding tape on the shelf -- it's a big library. We want to move away from tape and keep all the clips on a centralized server but we need to be able to move all the existing files over to FCS via an automated process. The clips we keep in Virage has 5 or 6 fields that we would need to migrate over and the thumbnails are mpg2. Has anyone had any experience migrating huge chunks of data over to Final Cut Server? We ditched our Avids and Unity and purchased FCP. Final Cut Server makes sense. (By the way...for what we paid for Virage, I could have purchased Final Cut Server and a Porsche to drive it to the office.)

    My company is implementing FCSrv as a video database. Moral of the story: I did everything from scratch. I took the time to log and digitize all the tapes, creating a file folder structure that corresponds to the tape label. I can say from my experience, you need to organize and have all of your original media ready on the drives that you want the files to live on and THEN upload to FCSrv. I left those drives as Edit In Place devices, created FCSrv assets, and then turned the drives off. The drives only come back on when I want to copy over any of the source files. Also, FCSrv wants to create everything from scratch - its own proxies, thumbnails, and poster frames. Currently I believe the only metadata you could map / migrate over would be fields associated with FCP Log and Transfer media. Another workflow hint I have is to find media that has the same (or most similar) metadata and upload those at the same time (choosing create individual assets). Also, there is a great workflow on the forum for bulk metadata changes that helped me out a lot : http://discussions.apple.com/thread.jspa?messageID=7522555
    Every time I call Apple anymore they try to sell me on purchasing the custom workflow services from an engineer so you could look into that for specific help with your current metadata fields. Otherwise, I'd suggest hiring some interns
    Good luck!

  • Has anyone migrated from 10.7 Server to 10.8 Server using Drupal?

    I migrated my server, which in addition to hosting a couple of traditional web sites also has a multi-site Drupal 7 installation, and now I'm regretting it big time.
    I had to futz with the settings to get the traditional web sites back on line, but the Drupal sites broke hard. Couldn't even load the user login screen, nothing but streams of error messages.  Now I'm in the midst of trying to revert to Lion Server again (including having to re-partition and re-install Lion to get rid of the 10.8 recovery partition) and keeping fingers crossed I can get back to what was working. Still a couple of hours to go on the Time Capsule restore.
    This on my year-old Mac Mini Server that came with Lion Server installed.
    Has anyone out there successfully migrated a mult-site (or even solo) Drupal 7 server to Mountain Lion Server? If so, what did you do to get your sites back on line?
    Thanks in advance.

    Yep, I've migrated from 10.7 to 10.8 with Drupal 7.
    I've got 4 web sites running under 3 different domains.
    I run stock os x apache and Postgres and php 5.4 (php-osx.liip.ch) and MySQL via homebrew.
    Server.domain.com = os x server wiki site
    Domain.com.au is my drupal / os x Postres site
    Crm.domain.com.au is my Sugarcrm / MySQL site
    Anotherdomain.com.au is a simple HTML page.
    Wiki site worked out of the box
    Drupal and sugarcrm broken
    HTML site worked.
    1. To fix the Drupal site, I just deleted from server websites panel and then re-instated it. That fixed that.
    2. Set debug level to debug in apache2/httpd.conf
    3. Looking at the apache error log, found that sugarcrm permissions needed to be reset and the cache directory needed to be writable by _www.
    4. Fixed that and now up and running.
    Hope that helps.

  • Has Anyone Tried This "Report Spam" Script?

    I just happened to stumble upon this script and I'd like to try it, but I'd like to know if anyone here has had any experience with it before I run it.
    Thanks for the feedback!
    Link with Description:
    http://www.hawkwings.net/2006/09/26/applescript-to-report-mac-spam/
    Download site:
    http://alignedleft.com/reportspam/

    VitoArc,
    Haven't used it but it is pretty straightforward.
    It just automates the process of sending your spam mail to Apple and to the Feds. If you aren't a .Mac member using an @mac.com address, then you shouldn't be sending it to Apple.
    The script sends mail from your Junk folder.
    If you want to do this without a script, just select the mail in question and make sure that you have the "Long Headers" option selected so that the full headers are showing. Then just forward the mail to [email protected]

  • Has anyone migrated from UIX to ADF Faces?

    We are currently on JDeveloper 10.2. We have built applications using UIX. Now we want to upgrade to JDeveloper 10.3. I am trying to find out if there is easy conversion path for the upgrade from UIX to ADF faces.
    Are there any tools available to do this conversion or do I have to rebuild the same UI using ADF faces?
    If you have dont this, can you please share your experiences?
    Thanks,
    Uma

    Hi,
    you can read about the migration utility at http://www.oracle.com/technology/products/jdev/howtos/1013/uix/index.html
    Frank

  • Has anyone been able get RSA SecurID installed and working on Mavericks?  If so please enlighten me!

    I just migrated from 10.7.5 to 10.9 (new MacBook Pro).  Fantastic migration except for the VPN/Secur ID portion.  Has anyone migrated or re-installed RSA SecurID onto 10.9?
    I went to this link:  http://www.emc.com/security/rsa-securid/rsa-securid-software-authenticators/mac- os.htm
    And the install package would not open.  I realize in the support section for the product that it does not designate Mavericks (10.9) but in the past they have always been a couple of OSX versions behind and there has been a way to get it to work.  I hope so.  Really looking forward to using this new MacBook with Mavericks.  Everything else seems to work great!
    Best Regards;
    Scott

    I installed RSA SecurID after updated to 10.9, but it didn't work.
    the issue is following:
    "Error loading application, please contack your administratot"
    I tried to install it again, and can use to gain the passcode. but the SecurID cannot work well after i restart my MBP.
    the error information is same as the last.

  • Has anyone Connected a Crystal Report directly to a Microsoft Project file (MPP)?

    Post Author: Brian Morris
    CA Forum: Data Connectivity and SQL
    Iu2019m aware I can save Microsoft Project Files (MPP) to an Access Database, Excel document etc. and there are ways to connect to a Microsoft Project Server.
    I wanted to know if anyone has managed to connect directly to one though. Currently we use MPPs to report project status and other deliverables, and itu2019s been an annoyance to have to save the project file then export the data over into a new excel document when ever we have changes (since not all users have project or need all the data in the file).
    Preferably, a user should be able to save that project file and anyone that has the Crystal report should be able to run the report against the MPP file. In addition to this, it would be extremely helpful in getting a formalized and nicely formatted report when running reports against rational and MMP files, thus giving an alternative from SODA reports in Microsoft word, which doesnu2019t always work well.
    Thanks!

    Post Author: Brian Morris
    CA Forum: Data Connectivity and SQL
    Ok, I answered my own question on the connection issue, but I'm having issues with the predefined fields that enter into the report. The Database Expert shows the correct table names, but when I select them and look at the fields, they are all showing fields that are part of the "Project" table. when I use "Add Command" and use SQL to do a "Select * From TableName" ,where TableName is the name of the respective table, I get the data I'm looking for. Has anyone else run into this error? Is the error on Crystal Reports side or the Data provider's OLE DB driver? Has anyone with a fully patched system encountered the same errors?
    Current SetupCrystal Version: 11.0.0.1282CR Professional; Product Type:FullOLE DB Driver: Microsoft Project 10.0 OLE DB Provider
    I have pasted my findings below, hopefully other people won't have the same issues I did trying to find this information. if anyone else wants to test and see if they get the same issues I did it would be greatly appreciated.
    Connecting a Crystal Report XI to a Microsoft Project File (MPP)
    Prerequisites (as I know them)
    -          Have an installation of Crystal Reports on the machine (a given)
    -          Have Microsoft Project 2000/2003 installed OR  the Microsoft Project OLE DB provider which is installed with Microsoft Project (NOTE: Microsoft 2007 supposedly no longer supports OLE DB and requires an OLAP cube be made or a SOAP connection be used, which I donu2019t deal with personally)
    Creating the connection
    Start Crystal Reports
    Click u201CBlank Reportu201D on the start page
    in the u201CDatabase Expertu201D window, under u201CAvailable Data Sourcesu201D, Select u201C+u201D next to u201CCreate New Connectionu201D
    Select the u201C+u201D beside u201COLE DB(ADO)u201D
    If a u201COLE DB (ADO)u201D  window does not come up, double click u201CMake New Connectionu201D 
    In the u201Cprovider:u201D box Select the u201CMicrosoft Project 10.0 OLE DB Provideru201D
    The name may be different depending on the version of project you install and the patch you have on the machine
    Select u201CNext >u201D
    Under u201CDatabase:u201D copy/paste in the path and project file name
    I donu2019t believe the other fields u201CData Source:u201D, u201CUser ID:u201D, or u201CPasswordu201D need to be filled out, and in fact, I got an error when entering in data into them
    Example: u201CC:\Projects\Project Name\Current Schedule.mppu201D
    Select u201CNext >u201D
    In the Advaned information window, verify the project Name is the path of the project.
    I have not found the use of u201CEnterprise Modeu201D (default: 0), u201CAlways Loadu201D (default: 0), u201COLE DB Servicesu201D(default: -5), or u201CEnterprise RUID Listu201D (default: blank), removing them or changing them did cause errors though.
    Click u201CFinishu201D
    Adding in Tables and extracting data
    You now have a connection to the project File you listed. There is an issue Iu2019ve found though that all the tables you see listed are filling their fields in from the u201CProjectu201D Table, rather then their respective tables (Example: u201CAssignmentsu201D is pointing at u201CProjectu201D rather then the obvious connection u201CAssignmentsu201D). You can, however, use the u201CAdd Commandu201D and select the table you want with just a little SQL code:
    Select *
    From Assignments
    After creating the command, highlight it and hit u201CF2u201D. You should be able to edit the name and change it from u201CCommandu201D to something more meaningful. At the current time Iu2019m unsure if the issue with the default tables all pointing toward the project table is an error on the provider side or Crystal Reports end, and if one of the new patches will fix it. I will update this document accordingly when I have more information and do more testing. I will note however, there is no way to change which table these preset fields point to.
    Thank you for your time.

  • Has anyone ever had a problem reported in Maps actually corrected?

    I have made numerous problem reports in the Apple Maps App (Street mislabeled, etc.). None have ever been corrected.
    Has anyone had better luck?

    yup Jim- I have been reporting an area that has been placed 2 miles south of its actual location (in a different region) repeatedly for a year and there is no change. I wouldn't usually care but all the photos I have taken at home are labelled incorrectly in moments too. They couldn't give 2 *****.

  • Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

    Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

    Hi AKE1919,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • Has anyone else gotten an email supposedly from Apple saying you had missing data and to update? I went to update, gave some info only to see they wanted my credit card info and money. How do I report this and to whom. Impossible to contact Apple.

    Has anyone gotten an email saying your system was missing data and to update? I went to update, gave my email and password just to find it wasn't really Apple
    but, wanted my credit card and money. Did not follow up. Where and how do I report this to Apple. Seems impossible to contact them.

    Forward it to [email protected] and then delete it.
    (112838)

  • Using Firefox, I can login and browse my financial institution (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads 66% and then hangs. Has anyone else reported having this issue?

    Using Firefox, I can login and browse my financial institution website (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads about 66% and then hangs (loading). I have let it load until NFCU asks me if I want to cancel the session, a much to long of a load time. Has anyone else reported having this issue with NFCU or Mozilla Firefox 3.6.18?
    I have also posed the question to NFCU, currently awaiting response and will share what was given.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Has anyone used Migration Assistant to move services from one system running Server to a new system?

    So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server.  In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers.  The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases.  There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
    Has anyone used Migration Assistant to move services from one system running Server to a new system?  Are there any details that are particularly important to get right?  Are there things that require manual steps after Migration Assistant is done?
    There are other ways I could tackle the problem, of course.  I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them.  That would complicate such an approach.  I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

    yes. I migrated a server frm lion to mavericks following these notes a while back:
    OS X Server: Upgrade and migration from Mountain Lion
    i do not recall having any problems with it.

  • Migrating Hyperion Financial Reports Studio Reports

    What is best Practice for Migrating Hyperion Financial Reports Studio Reports from a Production Environment to a test Environment?

    There was a similar question on another forum last week: Financial Reporting Studio Reports from production to Test
    If you are on version 11, I suggest Life Cycle Management.
    Cheers,
    Mehmet

  • Migrating Hyperion Financial Reporting reports

    Hi everybody.
    We have to migrate the Hyperion Financial Reportings reports from Dev to PROD, we tried copying the database from DEV and placing it onto PROD but that doesn't work as I believe there are several tables pointing to the DEV environment.
    Would any of you know to migrate the reports from Financial Reportings? Either moving database or a simple way just to extract and import the reports .
    Thanks

    If you are using Version 11 you could use LCM.
    The easiest way is just to log into workspace and export all the reports in one go, it creates a zip file of all the reports.
    You can then import them into your target env via workspace.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for