Has anyone noticed 9 Horizontal black lines in Nikon V3 NEF files in the shadows?

Has anyone noticed horizontal black lines in Nikon V3 NEF files, as shown in the image. I have opened the image in Aperture and there are no lines, also tried 2 different computers.

The lines are there in the raw data, and not something Adobe is doing.
Here is a screenshot of the central area in RAWDigger raw-analysis software, with things set to stretch the channels much as a high-ISO image would have:
What I can't tell from the images is if these lines are in optical path, like streaks on the sensor, or if they are added by the process that reads the raw data--read pattern noise.  It is possible that Aperture would have access to "dust delete data" if such a capability exists for the camera and is interpolating around the artifacts or if there is some other reason Nikon software doesn't show them.  I don't know.  You may be able to find information online but rest assured it is a camera issue and not an Adobe issue unless you're asking why Adobe software isn't fixing the problems automatically like Aperture must be doing, and I would guess Adobe doesn't have any way to fix sensor anomalies that aren't more than 1 pixel in size--single hot or dead pixels.
Unless Nikon can replace or service the camera to remove such things, I don't know what else to suggest.

Similar Messages

  • MSI GS60-2PC Screen flicker and horizontal black lines issue

    After about 2 weeks of using my GS60, I began to notice that the screen sometimes flickered, and on other occasions horizontal black lines would appear. I have updated my GTX driver to the latest version, and I haven't been able to find any help on the net. Does anyone know how to fix this issue?

    Hi!!! I'm Manuel from Argentina. I bought a MSI GS60 in miami 5 months ago, and... I HAVE THE SAME PROBLEM!! sometimes mi screen is flashing and appeared horizontal lines  (blacks).
    There's no solution for this problem? it's a very expensive laptop.
    I hope someone can help.
    greetings from Argentina!!

  • Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7?

    Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?

    Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?

  • Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list?

    Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list?  Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.

    Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list?  Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.

  • Has anyone noticed how much slower it is to import photos from iphone to iphoto

    has anyone noticed how much slower it is to import photos from iphone to iphoto in Mac OS.?

    How many photos do you have in your iPhoto library? As your library grows, it will take more time to load when the app launches.Personally, I have not noticed any slowdown.
    And my question was meant to find out whether you import process had gotten slower than...a year ago, a month ago, compared to other photo apps? Running Mountain Lion..since you upgraded? In the end..what? Hence, I asked.
    Try being clearer next time. That way we don't have to beat around the bush when trying to help you.

  • Has anyone noticed that their iPhone 5 has a yellow tinged display?

    Has anyone noticed that their iPhone 5 has a yellow tinged display and the colours look too intense? Just does not look right.

    Correction - I HAVE reported the fault to Apple and to my network provider who have informed me that they have received numerous complaints from their customers and are sending out replacements to them and to me. As I hadn't stated what steps I had taken in my original post you shouldn't be so fast to assume what I have or have not done.
    Thank you and goodbye.

  • Has anyone noticed MacBook Air slowing down after installing Maverick

    Has anyone noticed MacBook Air slowing down after installing Maverick?

    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

  • Has anyone noticed that the 1st iPad out cannot install some apps because it can only update to the iOS 5.1.1.

    Has anyone noticed that the first iPad only updates to iOS 5.1.1. So some apps will not install.

    Yes, lots of people have noticed.

  • Has anyone notice that since the new update it's impossible to edit a text, then forward it to another party. I hate having to not able to do so. *****!

    Has anyone notice that since the new update it's impossible to edit a text from the sent message, then forward it to another person. *****!

    No, it's not. Tap an hold on the message you want to forward. Tap on "More" in the pop up box. Tap on the foward arrow in the lower right. Edit as neccessary.

  • Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?

    Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?

    Actually I restarted the machine (late 2009 27" iMac) and everything seems to be working, normally...

  • Has anyone noticed that thier battery doesn't last as long with ios 7?

    Has anyone noticed that thier battery doesn't last as long with ios 7? I used to be able to double click home to turn off open apps and now notable to.

    My battery has had no noticeable change.

  • Has anyone noticed that verizon ringtones are much louder than AT

    Has anyone noticed that verizon ringtones are much louder than AT&T'S ringtones? By a lot.

    No, I haven't noticed. I have an AT&T phone, and the Verizon phones in my office sound about the same when they ring.

  • Has anyone noticed that your Macbook Pro is really hot after installing Lion?

    Since I have installed Lion on Friday, I have noticed that my MacBook Pro is very hot to the touch. Has anyone found this same issue?
    Haven't had any of the problems that other people have had since installing.
    What are your thoughts out there?
    Thanks,
    Michelle

    I had this same concern on mine as well until I remembered that Lion would have to index the entire drive. My MBP is using an 120GB Intel SSD so once indexing started it did not take long, about 2 hours with the drive at 59GB, but it was warm the entire time.
    My iMac (2011 version) ran hot for around 6 hours with the standard 1TB drive about half full.
    Since then I have noticed they both run a few degrees hotter than before but nothing I am concerning myself with as it's right around 100 to 100 degrees versus 90 to 100 with SL. So I beleive there are some services running that are doing alot, probably the biggy is the autosave feature.

  • Has anyone noticed a decrease in battery performance?

    Has anyone noticed a decrease in battery performance?  Is this covered under the Apple Care Warranty?

    Hi Dominick,
    The charge capacity is definitely inline with manufacturer's specifications. I will say that the charge cycle is a little high, though.
    129 cycles / 8 months = 16 cycles (per month)
    That's about one every other day. It sounds like you use the machine frequently for short periods of time. Is this machine at home or in an office? Or are you mobile with it to where you don't have access to A/C power or can't be "tied down" to a specific location for any period of time?
    There's no reason to run the machine off of battery power if it's sitting on your desk. Matter of fact, I probably use my "portable" at my desk more than I use it was a portable. You could be racking up unnecessary cycles otherwise. On one of my machines it's plugged into power 98% of the time, I'll run it down and give it a full recharge once a month per Apple's recommendations.
    As AussieDJ recommended, check Activity Monitor to see if anything is consuming unnecessary amounts of CPU usage.
    If this is an 11" MBA, approximately 4 hours of run time is well within reason (based on usage), but that's a little low if this is a 13" MBA. Again usage is important here, web browsers and flash-heavy content consume a surprisingly large amount of battery.
    I'd also be curious to see a consecutive usage test versus these 10-30 minute usage intervals throughout the day. Give the machine a full charge, use it as your normal would for a 2-3 hours and see how that goes.

  • Thin horizontal black line at BOTTOM of page when scan on HP Officejet Pro 8600 Plus

    I owned an HP Officejet Pro 8500 and scanning was perfect.  I recently purchased an HP Officejet Pro 8600 Plus.
    When I scan from the HP 8600 auto document feeder, I get a thin (several pixel wide) black line along the bottom edge of the resulting scan.  This line will sometimes be slighly crooked or only appear across half the page, in which case it tends to get thicker toward the edge of the page).  I believe this line is an artifact from scanning the very bottom edge of the oroginal document.  I think it is showing where the bottom edge of the page was when scanned.  If the document is a little skewed, then the black line at the bottom will be a little crooked, probably following the edge of the page.  This problem is consistent, and repeatable.  It happens in both "Scan To E-mail" mode and "Scan To Network Folder" mode.
    When I scan from the flat bed, I get a very narrow black line along the very top edge of the resulting scan, but the bottom appears fine (although I've not tested this extensively).
    These thin black lines did not occur when scanning from the HP 8500.
    I am wondering if there is a setting to adjust this, or if it is a firmware difference between printers that needs debugging.
    This question was solved.
    View Solution.

    I find it interesting that the issue happens across both printers.  This is what leads me to believe this is something with the software/connection with the PC.  One thing I will note is that you mentioned above using Adobe Reader 10.1.6.  The latest version of Adobe Reader is 11.0.02.  I would advise removing your current version of Adobe Reader and install the latest version. 
    I am not sure if this will fix the issue as you mentioned the line comes across in jpeg and other scanning styles.  Do you possibly have another PC you could try setting up a connection with quickly and attempting a scan?  This would be another way to ensure if the issue is coming from the printer or a connection/software issue.
    I would like to make sure the issue is coming from the scanners on these printers before returning the printers as I would hate for you to get another model printer and the issue remain with this printer as well.  However, I will note that the Laserjet Pro 200 is a nice series printer from my experience.  I have used the Laserjet Pro 200 black and white only edition, the MFP, and the TopShot edition where I am located.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

Maybe you are looking for

  • Migrating from NT to UNIX (Tru64)

    Please refer to statement "... With regards to import/export, Import/Export Utilities currently will <B>ONLY<B> work between portal installations which are at the <B>SAME VERSION LEVEL</B>." in the following thread - http://technet.oracle.com:89/ubb/

  • WBS Element Value into PR

    Hi All, How the WBS Element Value will come automatically to Purchase Requisition  when the PR is generated from PS. Regards Sangram

  • Schedule execution of SP at a particular time in Oracle 9i

    Hi, I want to execute a stored procedure w/o input or output parametes @ 6:00 a.m daily in Oracle 9i Will I have to schedule a job or use a scheduler. What is the most convenient method and also which requires the least privileges. Thanks in advance.

  • Dynamic parallel node numbers

    hi, is it possible to have a dynamic number of parallel branches determined at runtime and not at design time? Christophe

  • Where can I download the JMS C API for WLS 12c?

    Where can I download the JMS C API for WLS 12c? It doeesn't appear to be bundled with the standard or supplemental WLS zip files, nor obvious as a separate download bundle. Searching oracle.com finds plenty of documents which reference its existence,