Has anyone noticed this V-Drums mapping bug in Drum Designer?

Hi guys
There seems to be a bug in the v-drums mapping for Drum Designer... wondering if anyone else has noticed this?
On standard Roland V-Drums kits, the toms are mapped as follows:
High tom: C2
Low tom: A1
Floor tom: G1
On some of the Drum designer kits, such as "Neo Soul" and "Retro Rock", the above tom mapping works correctly.
However, for other kits, such as "SoCal" and "Roots Kit", the low tom is played when either the low tom (A1) or the floor tom (G1) is played on the V-Drums kit.
It appears that for some reason, there are some kits such as the two mentioned above, that are mapped incorrectly so that the same low tom sound is played when the drummer is either hitting the low tom or the floor tom. I am using a standard Roland TD12 kit.
I've raised this as a bug using Apple's "Logic Feedback" page - hopefully they will check it out soon!
Cheers,
Mike

There are 2 work arounds for this situation.
- edit the midi note sent by the module to set it to F1 (kit - inst - F4 - F5 - note number)
- insert a midi transformer between your Roland module and the drummer track in logic's midi environnement window
The second option is more tricky but it opens up a whole word of other tranformations which are worth exploring.
HTH
(I'm french, I hope this explanation  was clear enough ...)

Similar Messages

  • Has anyone noticed this feature on the keyboard?

    (call me slow) but the other day I found out how to add different letter characters from other languages into a text or email. If you find the letter that you want hold your finger on it for about two seconds and it will open a window with other variations of the same letter. I found it amazing. Is this new to anyone else or am I just really slow?

    kmosh100 wrote:
    Have no idea how it might be used unless you are writing bi-lingual emails.
    Some people do SMS and email in other languages besides English

  • Has anyone noticed this with the 1.2C BIOS?

    The temperature goes back to normal (dodgy high temps) after flashing the BIOS and cold booting the PC. But after that, if you just go into BIOS as you're booting your PC and then leave by saving to cmos and leaving, the temps are lower again.
    Happens for me anyway, my NB temps are always at around 45C regardless of what I do though. I'd still like to know if this is normal.

    I've gone so far as to replace the teensy NB heatsink, and put a much larger active one on. I did this after I saw its temp skyrocket to 57C , along with huge reliability probs. The trusty finger test verified that the cooler was really toasty.
    When the old sink came off, thermal goop was only on about 1/3rd of the chip and all bunched in one corner. Frankly I wasn't impressed with MSI at this point. I put a modded Zalman passive cooler to make it fit around my vid card and to be able to mount a 40mm x 25mm fan on it's side. I have tons of airflow through my case with 4x80mm + 1x120mm + 3 PSU fans + Water cooling. With alkl that cooling and airflow I should be able to chill my beer in there while my compy hovers a foot off my desk!  
    I'm running 1.2 b12 bios, and temp still hangs around 45C even with the active cooler.  My system is not OC'ed. Is this temp for real? I mean the chipset does not have a VPU, or a memory controller. This temp is at idle! It really should not be getting this hot. CPU stays around 29-32C.

  • I need help with a plugin. I can't get the quciktime import plugin. Has anyone noticed this.

    I have noticed that the whole abilities to import quicktime plugin. After effects says its gone. I can't find any downloads. I am still on free trial. But why would I buy something in a store that isn't full. Tech support says they won't help. Who knows what to do.

    Nobody can tell you anything without proper system info or other technical details. Start by reinstalling the program and Quicktime. Otherwise the relevant stuff could simply be blocked by a firewall/ virus scanner or whatever and you need to make it behave...
    Mylenium

  • Has anyone noticed this?

    I dont know if its just me but, if you try to put an app into an already full folder, the app itself will dissapear. It does not move to the side or anything, it just vanishes from the menu. If I searched my iPhone for it by name however, it does show up, but the app is still not in the menus. I tried to restart my iPhone but it won't come back anywhere. So where did it go?!

    Jerry - I've had the same problem. It's gotta be a kink in the software, right? Anyways, to remedy the situation I caved and added album titles to ALL of the songs on my iPod so they appear every time. It's a pain, but it's out of love.

  • My S5 corporate email stopped working. I heard it is a bug in LOLLIPOP. Has anyone heard this?

    My S5 corporate email stopped working. I heard it is a bug in LOLLIPOP. Has anyone heard this?

    Sorry to hear of the issues you are experiencing, StephenjCrane. We definitely want to make sure your work email is working. When you try to access your email, are you receiving an error message? Are you using the default email client, or a third party application? Do you know if other coworkers are also experiencing the same issue?
    Just in case, please try a wipe cache partition as this can help stop a number of issues.
    http://vz.to/1uorSMg --When you reach Step 4, please choose Wipe Cache Partition, and not Wipe Data/Factory Reset. Once this is done, please select Reboot to restart your phone.
    When you try to access
    NicandroN_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I have an iPhone 4S. I noticed that some of my contacts disappear from the phone. Has anyone had this problem? Thank you.

    I have an iPhone 4S. I noticed that some of my contacts disappear from the phone. Has anyone had this problem? Thank you

    I went into the cloud on phone it was on. Turned off and back on. Now i have 6 of one contactDeleted face books also incase that was the issue.  I went to Itunes and couldnt find contacts - now I wonder it is is my outlook email too adding information as I am seeing contacts that are only on my outlook emails.

  • Has anyone noticed that thier battery doesn't last as long with ios 7?

    Has anyone noticed that thier battery doesn't last as long with ios 7? I used to be able to double click home to turn off open apps and now notable to.

    My battery has had no noticeable change.

  • Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

    has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image.  What's going on?  I've noticed this has happened in the past randomly with other clips and it's driving me cray cray!  Any help appreciated greatly and thanks in advance for taking the time

    In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
    Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
    MtD

  • Has anyone seen this display problem?

    I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
    I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
    Thank You

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard.  Has anyone seen this?

    We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4.  A clip with an alpha which keyed perfectly before the upgrade, now will not key.  If I convert the clip to the Animation codec, it keys perfectly.  If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas.  Has anyone seen this or have any suggestions on how to correct this?  Is it a bug? 
    Thanks,

    Motion 4.0.3
    It just doesn't seem to recognize the alpha at all. 

  • Has anyone seen this MacBook Pro 15" 2008 problem before?

    Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
    I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
    Has anyone seen this before, or have any advice about how best to proceed?
    I have put a video of the symptoms here:
    20120915 135612 - YouTube
    Thanks for reading. This is my first post so apologies if I've rambled a bit!
    Steve
    MacBook Pro 15", late 2008.

    I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
    Anyhow... Mr. Ah
    The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
    Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
    If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
    Post back and say what the situation is, especially if you just recently updated to 10.5.5.
    And post back with what kind of G5 you have, look in the "About this Mac" window.
    Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

  • Has Anyone Experienced This Situation WIth Video Ipod (40gig)

    This might seem trivial but i have noticed something happening recently on my ipod. You know how when you are listening to a song and you press the middle button twice the display on the screen will be a picture of the album or CD from which the song came? Well, recently, there is only a square with no picture of the album art. Has anyone had this problem and is there a known fix? Thanks
    Alienware   Windows XP  

    Mine does that sometimes. I'm not sure why. All I do is reset my iPod, and it seems to fix the problem. All you do is hold the center button and the Menu button at the same time until you see the Apple logo appear. Resetting your iPod will not erase what is on there. Give that a try and see if it fixes the issue.

  • HT201270 Has anyone done this update? Is this update worth it? what are the main features of this updates?

    Has anyone done this update? Is this update worth it? what are the main features of this updates?

    What version are you on now ? If you are on 5.1.0 then the update to 5.1.1 is very small - from here :
    Improves reliability of using HDR option for photos taken using the Lock Screen shortcut
    Addresses bugs that could prevent the new iPad from switching between 2G and 3G networks
    Fixes bugs that affected AirPlay video playback in some circumstances
    Improved reliability for syncing Safari bookmarks and Reading List
    Fixes an issue where 'Unable to purchase' alert could be displayed after successful purchase
    If you are on an earlier iOS version then you will get the intermediate updates as well e.g.
    iOS 5.1 : http://support.apple.com/kb/DL1504
    iOS 5.0.1 : http://support.apple.com/kb/DL1472

  • HT201684 In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?

    In Yosemite this no longer works, has anyone figured this out? How to set a custom default umask for all applications?
    I've tried everything to get a custom umask set for all apps. It just seems impossible...
    Is there a replacement for launchd-user.conf?

    Please file a bug report: https://bugreport.apple.com
    I am sure this is something that got lost, like environment variables, in the Yosemite/iOS merger.

Maybe you are looking for

  • How can I close out the page I am working on in safari when error boxes keep popping up?

    How can I close out the page I am working on in safari when error boxes keep popping up?

  • Long term: Mountain Lion or Snow Leopard

    Hi, Had to have new hard drive installed a few days ago. System was "upgraded" to Mountain Lion. I had a backup from TimeMachine but for whatever reason, when configuring hard drive it would not see my external hard drive so I had to restore applicat

  • No HUIDENT in the table /SCDL/DB_PROCI_I

    Dear Experts, I've created and distributed an inbound delivery from ERP-System to EWM-System: As you can see this inbound delivery contains a HU (number 199129). But when I check the table of Inbound Delivery Items (/SCDL/DB_PROCI_I), there are no HU

  • Sign on .... again

    Why all of the sudden, am I having to sign on every time I start Itunes? There should be a way to store the password? Using windows xp.

  • My first IPAD; can you help me find a cover and keyboard?

    Thanks in advance for reading this: Im buying a IPAD 3 tomorrow and I think I am going to need some sort of protective case for it. That said, id like for this case/cover to work seemlessly with the Logitech Ultrathin keyboard (whcih I have read very