Has anyone noticed this with the 1.2C BIOS?

The temperature goes back to normal (dodgy high temps) after flashing the BIOS and cold booting the PC. But after that, if you just go into BIOS as you're booting your PC and then leave by saving to cmos and leaving, the temps are lower again.
Happens for me anyway, my NB temps are always at around 45C regardless of what I do though. I'd still like to know if this is normal.

I've gone so far as to replace the teensy NB heatsink, and put a much larger active one on. I did this after I saw its temp skyrocket to 57C , along with huge reliability probs. The trusty finger test verified that the cooler was really toasty.
When the old sink came off, thermal goop was only on about 1/3rd of the chip and all bunched in one corner. Frankly I wasn't impressed with MSI at this point. I put a modded Zalman passive cooler to make it fit around my vid card and to be able to mount a 40mm x 25mm fan on it's side. I have tons of airflow through my case with 4x80mm + 1x120mm + 3 PSU fans + Water cooling. With alkl that cooling and airflow I should be able to chill my beer in there while my compy hovers a foot off my desk!  
I'm running 1.2 b12 bios, and temp still hangs around 45C even with the active cooler.  My system is not OC'ed. Is this temp for real? I mean the chipset does not have a VPU, or a memory controller. This temp is at idle! It really should not be getting this hot. CPU stays around 29-32C.

Similar Messages

  • HT1349 Has anyone had issues with the iphone 4s and facebook.

    Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

    @razmee: rather unhelpful.
    @tata - we're having the same trouble, and the only solution we've found doesn't fix it.
    1) uninstall
    2) login on PC/MAC and change password
    3) reboot iphone
    4) install facebook app, reboot again
    5) login from iphone. 
    No joy.
    Safari works, but not for the apps.
    Of course, it's Facebook that has to fix this.

  • Has anyone had issues with the calendar dropping appointments?

    Has anyone had issues with the calendar dropping appointments? 

    sackster77 wrote:
    {snip}. . .Has anyone else had this issue?
    Answering this question will not help your issue.  You need to take the iPhone to the nearest Genius Bar.  That's the only solution that will reach an affirmative result.
    http://www.apple.com/retail/locator/

  • Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Has anyone had trouble with the LG 3 Cosmos when a call comes in; I am not able to hear from the caller, but, they can hear me?  The volumn is turned up but I can't seem to resolve the issue?  Thanks

    Oh no, Robinbird18! This is not what we like to hear about your cell phone. It makes it pretty hard to have a conversation with someone when you can't hear them. If you make a phone call out are you able to have a conversation with someone without any issues? How long has this been going on? Have you tried to use the phone on speaker phone to see if that works at all? Please keep us posted.   KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • Has anyone had problems with the latest driver update for the Lexmark printers? My Lexmark printers won't work with the latest driver update.

    Has anyone had problems with the latest Lexmark printer driver update? My Lexmark printers won't work with the latest driver update. If I reinstall an older version of the drivers, they work.

    Mine crashed once with new update, but working fine.
    I had to delete old printer, restart iMac, and then reinstall
    new drivers to get it to work. Would not complete without
    the restart after deleting non-working printer. No problems
    since and all features working.

  • Has anyone notice that since the new update it's impossible to edit a text, then forward it to another party. I hate having to not able to do so. *****!

    Has anyone notice that since the new update it's impossible to edit a text from the sent message, then forward it to another person. *****!

    No, it's not. Tap an hold on the message you want to forward. Tap on "More" in the pop up box. Tap on the foward arrow in the lower right. Edit as neccessary.

  • Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?

    Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?

    Actually I restarted the machine (late 2009 27" iMac) and everything seems to be working, normally...

  • Has anyone had experience with the new moire slider under the adjustment brush in LR4?

    There's a new moire removal tool under the adjustment brush in LR4. In the near future I expect to have photos that contain moire patterns. Has anyone used this tool yet? I'd like to get an inkling as to how effective it is.

    There is an example of moiré on the Nikon Imaging site for the D800E.
    http://imaging.nikon.com/lineup/dslr/d800/features01.htm
    I was able to reduce the moiré significantly, but not eliminate it with the Lightroom 4 adjustment brush. I haven't found any software solutions that can completely repair moiré. The Lightroom 4 feature seems about as good as any I've tried.
    Here are a few links you might find interesting:
    http://unsharp-mask.blogspot.com/2007/08/moir-removal-in-photoshop.html
    http://vimeo.com/23508129
    http://www.dbphoto.net/techniques/moire/index.html

  • Has anyone had issues with the backing of 5c coming apart from phone?

    I have the 5C and always keep a case on it. I noticed today that on the left corner, the back casing is coming off of the phone. I am not happy with this and want to go in the store but I know they will tell me I dropped the phone. I am anal retentive about taking care of my phone. Has anyone else had this issue?

    sackster77 wrote:
    {snip}. . .Has anyone else had this issue?
    Answering this question will not help your issue.  You need to take the iPhone to the nearest Genius Bar.  That's the only solution that will reach an affirmative result.
    http://www.apple.com/retail/locator/

  • Has anyone noticed this V-Drums mapping bug in Drum Designer?

    Hi guys
    There seems to be a bug in the v-drums mapping for Drum Designer... wondering if anyone else has noticed this?
    On standard Roland V-Drums kits, the toms are mapped as follows:
    High tom: C2
    Low tom: A1
    Floor tom: G1
    On some of the Drum designer kits, such as "Neo Soul" and "Retro Rock", the above tom mapping works correctly.
    However, for other kits, such as "SoCal" and "Roots Kit", the low tom is played when either the low tom (A1) or the floor tom (G1) is played on the V-Drums kit.
    It appears that for some reason, there are some kits such as the two mentioned above, that are mapped incorrectly so that the same low tom sound is played when the drummer is either hitting the low tom or the floor tom. I am using a standard Roland TD12 kit.
    I've raised this as a bug using Apple's "Logic Feedback" page - hopefully they will check it out soon!
    Cheers,
    Mike

    There are 2 work arounds for this situation.
    - edit the midi note sent by the module to set it to F1 (kit - inst - F4 - F5 - note number)
    - insert a midi transformer between your Roland module and the drummer track in logic's midi environnement window
    The second option is more tricky but it opens up a whole word of other tranformations which are worth exploring.
    HTH
    (I'm french, I hope this explanation  was clear enough ...)

  • HT201401 Has anyone had issues with the iPhone 5'S power cord going bad? I have purchased 2 in a 4 month span and they keep going out.

    Has anyone had an issue with the power cord for the iPhone 5? I have replaced two in a four month period

    Did you check with Verizon to make sure that your destination country would allow the device you have to connect? The possibility is that this country does not have (or you are not in range) a carrier that uses CDMA. If the carriers in this country use GSM you may be out of luck. VZW cannot guarantee service in any country outside the USA.
    Here is the number to call 908-559-4899

  • Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista

    I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes.
    I did this and then my CD/DVD drive was not recognised. I then decided to go for a system restore prior to the update. When I did this i-tunes worked again but a window opens every 30seconds saying 'Mobile device helper is not working'  At one point I had 116 windows open. Has anyone else had this problem or can offer any advice please? I have an i-pod classic and my system is windows vista which is approx 8yrs old. I have never had any problem with i-tunes updates before.

    Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
    This resolved my issue with the new update on Vista.
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)

  • Has anyone had problems with the clock app in iOS 6?

    The clock app has been updated and now allows me to use a song as my alarm tone. Have been wanting apple to do this for a long time. Problem is that when alarm goes off I get no sound. The phone just vibrates. I do not have the phone muted. Guessing this is a glitch in the app?  Anyone else having similar problem?

    Been using iOS 6 now for a couple weeks on an iPad 2 and twice have relied on it as an alarm clock. Both times it's failed to play the song I've designated as the alarm.  I've tried it with the cover open and closed, volume maxed and not.  Each time, after the designated alarm time, I've opened the iPad up & entered the security code only to be greeted by the alarm message pop up.  That's it.
    Kinda frustrating, to say the least.
    Am I using it incorrectly?  Having used the clock on the iPhone this way in earlier versions of iOS, I've never had an issue.  Would like to leverage this functionality, but being 0 for 2, not sure I want to risk a third time...
    Thoughts?

  • Has anyone had issues with the most recent Yosemite update

    I installed Yosemite October of 2014 mainly because I needed to update itunes to continue to help my daughter maintain her music files. Anyway the reason hardly matters. My computer and Yosemite did not get along. Posted up a file of my computer condition for people to look at here and the basic recommendation was to delete this that and the other thing. So I did that and the computer worked somewhat better. However I really am not sure if it was working better because Apple had been making progress with Yosemite ironing out Yosemite bugs. I had not reinstalled any of the software that it was recommended I delete back in October. So I doubt that is an issue.
    Two weeks ago while updating, generally, a Yosemite update started downloading to my computer. It is now running 10.10.2.
    Since then Mozilla crashes about five times a day and runs very slowly most of the time. Wondering if there is anything I can do or should I just wait it out...hope for the bestv AGAIN. I am encouraged by the fact that over time from October to mid February, Yosemite and my computer kept getting along better and batter. Since the update I am more or less back to square 1 as far as general speed and functionality and behind the eight ball as far as Miozilla goes as it is crashing constantly.
    I also do not like how update files are identified in Yosemite. There are times when all you get is a notification that there are updates ready with no identification of what they are. Had I known that was a Yosemite update, I would  not have touched it. What is up with this no identification of update files? Trying to ambush us now because people are beginning to avoid their updates? Good grief Apple.
    Anyway....any ideas? Just wait it out? Hope Apple gets back on a path of bug fixes for Yosemite? Anybody with a quick fix for this one?

    Automatically checking for updates is not the same thing as automatically installing updates and even automatically downloading updates is not the same thing as automatically installing updates. If Apple has now decided to describe them and implement them that way ....that is a mistake!
    Here is what I have in my App store preferences although I repeat, I have never changed anything. What items are selected there are the items selected ions ago or defaulted in possibly with iTunes 12.0 installed and I was always in the past been given the opportunity to view any updates BEFORE They installed.
    "Automatically check for updates" is checked. That should not cause an issue of any kind. If it is that is a problem not of my making!
    "Download newly available updates in the background" is checked with an additional descriptive line of information that reads "you will be notified when the updates are ready to be installed" I was going to uncheck this. Although I did not ever go to this location and change my settings which leads me to believe that this is a default choice in Yosemite or iTunes 12.0 as this is not the way I am used to my updates either coming to me or being installed
    "Install app updates" is checked ...Really....with permission, without permission, with notification? What the heck does this line really mean? Going to uncheck this
    "Install OS X updates" IS NOT CHECKED
    "Install system data files and security updates" is checked. This is another one that I am going to uncheck
    "Automatically download apps purchased on other macs" is not checked
    This system clearly Installed an OS X update without even asking me if I wanted it installed regardless of the fact the box is not even checked. So I have no idea how it managed to do that when the check box for OS X updates is not checked. A big OS X screen came up as the thing started installing leaving little doubt what it was at the point of being too late to do anything about it
    There is an interesting element to the relationship between "Download newly available updates in the background" and "Install app updates". If you uncheck the former, a check immediately appears in the box for the latter and the box ix grayed out preventing you from making further changes. So your options are for updates to be downloaded in the background or have updates installed without prior notification. What the heck kind of a choice is that?                             
    I am going to uncheck all of these for the time being except "automatic checking" and "Download newly available updates in the background". The former  should not cause a problem and has never in the past caused a problem. Seems to me that I am forced to the latter for now. However to be perfectly honest i no longer have any idea what Apple is doing and I am not completely convinced that they know either.....not any more
    I am going to go to Apple Tech Support and get full descriptions from them as it appears possible that they have changed their definitions and descriptive materials with regard to update activity either in Yosemite or iTunes.
    Finally, this issue with automatic checking has nothing to do with Mozilla crashing five times a day in Yosemite. That is a separate problem and I guess I am just going to have to hope that Apple Yosemite bug fixes brings this back under control.

  • Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?

    We just purchased a new Mac Pro and transferred everything from the old computer to the new one.  Now we are getting Adobe Application Manager errors and it wants us to download Application Manager.  That leads us to the Adobe Installer that encounters the following issues
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.  But that doesn't work either.
    Anyone run into this?

    Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
    Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

Maybe you are looking for

  • How do I stop a query from running when the page is loaded

    Hi All, I'm using JDeveloper 10.1.3.4. I have a JSPX page that is used to collect search parameters and then when a button is clicked uses those values to run a query and then populate a table on the same page. The problem is that when the page is lo

  • Can I use Apple TV with a Netgear NAS

    I've a Netgear Duo NAS connected to my wireless network which has an itunes streaming server built in. My question is will Apple TV pick up the wireless signal and allow me to stream the music to my hifi and TV? I really don't want to leave my comput

  • Can't access web after install

    Installed on new SLES11 box. Livetime says it's running, but I can't access at http://<ip> or http://<ip>:8700. When I installed SLES, I used the defaults for server type (Print). Show I add/change to Web/LAMP? Or is it something else? thanks

  • Fix Lion menu bar and dashboard graphics

    Hello, I recently upgraded my MacBook Pro to Lion a few months back. About 3 weeks ago, on one of the three user acccounts, the menu bar and dashboard got messed up. See images below. I was looking to find a solution, but could not find any. As I men

  • Different colors from original footage

    Hello, i got footage from a HMC151 Panasonic. I edit in prores 422 and then export in quicktime self contained, and then compressor to obtain a standard dvd. I notice that the colors are quite different from original footage, they seems like colds. T