Has anyone noticed with IOS 4.3.2 a longer "Settings" app launch time?
I have noticed more frequently since the 4.3.2 upgrade is a longer delay when I launch the "Settings" App. Even when I have shut down all background apps and clear memory, I still get a blank white screen for sometimes 4 seconds (an eternity in iPhone terms) between the time of pressing the Settings button and before the Settings panel appears. Anyone else experiencing this or have any ideas on what could cause this?
Re:I have noticed more frequently since the 4.3.2 upgrade is a longer delay when I launch the "Settings" App.
(in response to Bruce Caucutt)
I have noticed the same response since I upgrade to 4.3.2 - I have reset the phone after shutting down all the Opened Apps, no change. Checking this out a bit more I found that the 4 sec. White screen only appears if you are Launching the Settings App first time, there after it appears almost instantly. It seems it just taking a little longer to launch in the first instance.
Similar Messages
-
My iPad 2 with iOS 7 touchscreen is no longer responsive, although date/time is current as are off screen buttons. Tapping the screen merely produces a rectangular border around the tapped log in digit. No 'black to white' registers on the upper 4 dots.
Excuse brief text to above due to input limitations in original input field. I'd be grateful if anybody can give me any help to recover the situation. Thanks.Triple tap the home button
-
Has anyone noticed that the first iPad only updates to iOS 5.1.1. So some apps will not install.
Yes, lots of people have noticed.
-
Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?
Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?
-
Has anyone noticed that thier battery doesn't last as long with ios 7?
Has anyone noticed that thier battery doesn't last as long with ios 7? I used to be able to double click home to turn off open apps and now notable to.
My battery has had no noticeable change.
-
Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas? -
Has anyone noticed 9 Horizontal black lines in Nikon V3 NEF files in the shadows?
Has anyone noticed horizontal black lines in Nikon V3 NEF files, as shown in the image. I have opened the image in Aperture and there are no lines, also tried 2 different computers.
The lines are there in the raw data, and not something Adobe is doing.
Here is a screenshot of the central area in RAWDigger raw-analysis software, with things set to stretch the channels much as a high-ISO image would have:
What I can't tell from the images is if these lines are in optical path, like streaks on the sensor, or if they are added by the process that reads the raw data--read pattern noise. It is possible that Aperture would have access to "dust delete data" if such a capability exists for the camera and is interpolating around the artifacts or if there is some other reason Nikon software doesn't show them. I don't know. You may be able to find information online but rest assured it is a camera issue and not an Adobe issue unless you're asking why Adobe software isn't fixing the problems automatically like Aperture must be doing, and I would guess Adobe doesn't have any way to fix sensor anomalies that aren't more than 1 pixel in size--single hot or dead pixels.
Unless Nikon can replace or service the camera to remove such things, I don't know what else to suggest. -
Has anyone noticed a decrease in battery performance?
Has anyone noticed a decrease in battery performance? Is this covered under the Apple Care Warranty?
Hi Dominick,
The charge capacity is definitely inline with manufacturer's specifications. I will say that the charge cycle is a little high, though.
129 cycles / 8 months = 16 cycles (per month)
That's about one every other day. It sounds like you use the machine frequently for short periods of time. Is this machine at home or in an office? Or are you mobile with it to where you don't have access to A/C power or can't be "tied down" to a specific location for any period of time?
There's no reason to run the machine off of battery power if it's sitting on your desk. Matter of fact, I probably use my "portable" at my desk more than I use it was a portable. You could be racking up unnecessary cycles otherwise. On one of my machines it's plugged into power 98% of the time, I'll run it down and give it a full recharge once a month per Apple's recommendations.
As AussieDJ recommended, check Activity Monitor to see if anything is consuming unnecessary amounts of CPU usage.
If this is an 11" MBA, approximately 4 hours of run time is well within reason (based on usage), but that's a little low if this is a 13" MBA. Again usage is important here, web browsers and flash-heavy content consume a surprisingly large amount of battery.
I'd also be curious to see a consecutive usage test versus these 10-30 minute usage intervals throughout the day. Give the machine a full charge, use it as your normal would for a 2-3 hours and see how that goes. -
Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list? Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.
Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list? Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.
-
Has anyone noticed how much slower it is to import photos from iphone to iphoto
has anyone noticed how much slower it is to import photos from iphone to iphoto in Mac OS.?
How many photos do you have in your iPhoto library? As your library grows, it will take more time to load when the app launches.Personally, I have not noticed any slowdown.
And my question was meant to find out whether you import process had gotten slower than...a year ago, a month ago, compared to other photo apps? Running Mountain Lion..since you upgraded? In the end..what? Hence, I asked.
Try being clearer next time. That way we don't have to beat around the bush when trying to help you. -
Has anyone noticed that their iPhone 5 has a yellow tinged display?
Has anyone noticed that their iPhone 5 has a yellow tinged display and the colours look too intense? Just does not look right.
Correction - I HAVE reported the fault to Apple and to my network provider who have informed me that they have received numerous complaints from their customers and are sending out replacements to them and to me. As I hadn't stated what steps I had taken in my original post you shouldn't be so fast to assume what I have or have not done.
Thank you and goodbye. -
Has anyone noticed MacBook Air slowing down after installing Maverick
Has anyone noticed MacBook Air slowing down after installing Maverick?
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
hi,
introducing my name is Tahyan Tatah, you can call me Tata
My bos has ipad 2 with ios version 4. He had upgraded the ios become 5, suddenly his data was gone.
Is there any some tools to recover his data.
Thanks
Regards,
Tata
<Edited By Host>No, it will still stay as IOS 7.0.4
-
Has anyone notice that since the new update it's impossible to edit a text from the sent message, then forward it to another person. *****!
No, it's not. Tap an hold on the message you want to forward. Tap on "More" in the pop up box. Tap on the foward arrow in the lower right. Edit as neccessary.
-
Has anyone noticed glitching where the window you are on is auto de-selected and you have to continually click?
Actually I restarted the machine (late 2009 27" iMac) and everything seems to be working, normally...
Maybe you are looking for
-
How do I use CFTHREAD in combination with CFFILE Upload
I've been reading how CFTHREAD is supposed to release the client so that long-lasting operations like a CFFILE upload can continue to do their business while the client does something else. How does this work exactly? I can't find any concrete refere
-
Burned CD yesterday, can not burn today. Error 4280 - Windows Vista
Yesterday, I bought a number of tracks and albums from the iTunes store. Before I purchased them, I created a test CD with some tracks I already ripped from CDs I own. I burned this CD through iTunes. All seemed well. I bought my music. After, I also
-
I ask user to enter a date: yyyy-mm-dd, then I want to add one day to that date, I don't know how to do it? java.sql.Date time2 = java.sql.Date.valueOf( args[0] ); Many Thanks.
-
Oracle 11G database for 64 bit windows installation error
Hi, I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click n
-
Handling multi-value parameters in VS 2005 / Crystal 2008
In my program I am trying to handle a multi-value parameter using the following code, passing it an array of type string with the values that the user selected, but using the following code returns a 'Missing parameter values' error. For Each crP