Has anyone pre-ordered in the last 48hrs

Hey everyone has anyone pre-ordered in the last 48 hours on either Apple's website or VZW website? If so what kind of turn around time have you seen as far as expected shipments and so forth....
This post is not to complain or anything just interested in what everyone else is seeing so take it with a grain of salt!

I almost did but decided to wait til I can actually try one in the store. I wouldn't buy a car without taking it for a test drive first. Just me though.

Similar Messages

Has anyone seen xmonad crashes the last few days? [SOLVED]

I've seen a strange problem three or four times in the last few days where xmonad (0.9 and darcs) seems to be quietly crashing. Things will seem fine with it for a while, then after some point, I can no longer see launched programs (executed through xbindkeys) and xmonad's key bindings seem to fail. I can change TTYs and there's no abnormal CPU or memory usage, nor are there any errors in xmonan.errors. I can see that programs are being started from the other TTY; they're just not being shown on screen. Other than the changes in xmonad and supporting libraries, the only thing new for me is xmobar. It seems to happen if the machine sits unused for a while. Is anyone else seeing this?

flamelab wrote:In 3 and 6, the same component is ... gvim. Is it possible that gvim causes any problem ?
No, gvim's fine. I can reproduce it 100% of the time now with uzbl_tabbed. It's somewhat unstable and needs to have the files under /tmp deleted on other system sometimes. Hmmm?
--EDIT--
If anyone is still reading this, it only happens in xmonad. As well, after the machine goes to sleep and comes back, xmonad's Go {U,L,R,D} stops working properly if there are three windows open. Gads!

Has anyone else noticed since the last update to mountain lion, if you pit it to sleep, when it wakes there is no sound. you have to reboot to get sound?

I have found, in the past few days, since the latest update to Mountain Lion, if the Mac is put to sleep, there is no sound available when it wakes. I have to re-start to get sound back. Is this general??

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Is there anyone out there who pre-ordered on the 3rd and still has not received their iPhone???

I pre-ordered on the third and received an email on the fourth saying my phone had shipped. I checked FedEx with the tracking # Verizon provided and I still get the same status that I got on the 4th. It says the order has been "initiated". The next step would be "picked up", but here it is nine days after I pre-ordered and no phone!!! Hasn't even shipped!!!
Is there anyone who is experiencing the same problems???

I have been going back forth with Verizon and UPS and Verizon is blaming UPS and told me it's out of their hands once it ships. UPS is saying they're doing their best to get the package back to NJ where I am. I also tried cancelling my order with Verizon and was told it could not be cancelled because the package has shipped. I was told if I wanted another phone I'd have to pay for it again. No one knows where my phone is UPS says they have misrouted a trailer full of Iphones. I don't know how true that is.

I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?

I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?

Thanks for that. I did as suggested but when I tried again, it still did not work. Another com.apple.Grab.plist appeared in the Library.
I now have the following files in Library
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
file://localhost/Users/peterpatel/Library/Preferences/
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
What do you suggest I do now?

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so.

Lately I have been getting a rectangular screen titled Login Setting, with my Username and Password and asking me to Login. This screen shows up on opening the computer and has never been seen before the last month or so. It has one box titled Login Credentials with a username and password field and a second box titled Login Status at the bottom where it says "Profile not found" in red. I've never seen this before and ignoring it does not effect any operations. Is this legitimate or some kind of identity fishing?

Hello,
Have you done the recent Security updates?
Is this from Sleep or on bootup?
Timing is about right for the FlashBack attack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link

Has anyone managed to change the battery in a creative Zen MX

=i bought a 6gb zen MX? in November 2007 and have used it every day since. The battery is now in a sorry state and doesn't hold a charge for more than about 4 hours. After fully charging it, if you then leave it overnight the battery almost totally depletes. The battery is definitely a goner. Has anyone opened one of these players, changed the battery and then got the thing back together successfully? I've looked around on the net but can't find any info on how i might open the player to insert a new battery. Meanwhile i've bought a new Creative ZenMX but i prefer the old one with its dedicated slider for on/off and lock and it would be great if i could somehow get a new battery into it.
I still have my old Ceati've Zen Jukeboxes (30gb and 60gb) and i wore a couple of batteries out in those. But all you had to do was open the player and shove in a new battery. Shame that facility no longer exists in Creative's MP3 players.
Any help on the issue of replacing the battery in an MX would be much appreciated.

Re: has anyone managed to change the battery in a creative Zen MX%Thanks for the links Bertwin, much appreciated.
Now i have a problem in obtaining a replacement battery. Back in the day you could phone Creative (in Ireland) and order replacement batteries but alas, no longer. On the net you can easily find replacement batteries for every Creative player.....except for the Zen MX. ? The replacement x-fi battery looks similar? and has the same wire connections but it is 3.7v as opposed to 3.6v in the MX. Also the x-fi battery is rated at? 550mAh while the MX is rated at 0.55AH. (Though i guess that could mean they are the same capacity only it's written differently)
The Creative part number for the MX battery is BAC0603R79925 and the Creative Model No is : LPC6333445
If anyone knows where to obtain this battery please post.

Got a message that there is a problem with my Mac OS X Kernal. my PowerBook has crashed 4 times in the last week and happened when backing up to Seagate plus ext. hard drive.

my PowerBook G4 has crashed 4 times in the last week. I got a message that there is a problem with the Mac OS Kernal. Does anyone know what this means?

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://support.apple.com/kb/TS3742 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

My 3 GS has been working fine for the last two years or so but recently it has been getting "stuck" frequently when I try to do various things - answer a phone call, switch screens, go to my mail, etc.

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays?

Does anyone know what time the last episode of Breaking Bad starts streaming

Deos anyone know what time the last episode of Breaking Bad starts streaming on itunes?

A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

Why can't I buy a movie that I pre-ordered, with the iTunes card already redeemed?

See, I bought an iTunes card the other day and redeemed it that same day. After doing so, I pre-ordered a movie that was expected to be released on the 18th of March(today). So I tried to purchase the movie I pre-ordered with the credit I redeemed from the iTunes card, but it is asking for my billing information. So I clicked on the link where it says "To redeem code, click here", and it asked me to enter a code. My concern is why can't I buy that movie I pre-ordered with I the money I have in my iTunes account?

You didn't purchase the movie, you pre-ordered it. So the code works to put in the pre-order for the movie. So it's on hold, so to speak. Then when the movie comes out (and only then) are you actually billed, so you have to enter the code again in case you or someone else who has access to your computer used some -- perhaps too much of the credit in the meantime.
If I use a regular credit card and pre-order something, oftentimes there is some kind of perk or extra included along with it for me in return for pre-ordering. Like an extra feature for example. I don't actually get billed until I actually get the movie and so it's kinda like that.
Did you lose the code?
If you did, I'm sorry, but you could call Apple & hopefully they will make things right.
You could go here to get the ball rolling > http://support.apple.com/kb/HE57
Message was edited by: Michael Murphy3

Pre order of the apple watch

How long dose it take for apple to take money out for the pre-order for the apple sports Watch?

In the past purchases with Apple, my card has been hit for $1.00 within a week of making the pre-order. This is to insure that the card you provided is valid and has a credit line remaining to support the charge initiated for the Apple watch.....

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

How can I find out the date of a movie I am trying to pre-order if the date is not available/showing in the "manage pre-order" section?

Thanks so much for your reply King_Penguin. No, sadly there is not indication of the expected release date on the film, it's no where to be found. I have also tried to look in other places online, but no luck. I guess your latter statement jives more with my situation, that being the studio/rights-holder hasn't feel inclined to provide the date.

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Has anyone pre-ordered in the last 48hrs

Similar Messages

Maybe you are looking for