Has anyone purchased the Hangover Part 2?

I was wondering if anyone has purchased the movie The Hangover Part 2? I purchased the movie, started watching it and the subtitle.."One Week Earlier" shows up on the screen. Now it stayed on the screen the entire movie!!! On the DVD it only appeared for 3 seconds. Has anyone else had this experience? I have checked my settings. Both subtitles and closed captioning are turned off. I don't mind the subtitle being on there for 3 seconds like on the DVD. But it is very distracting being on for the ENTIRE movie!!
Any suggestions???
Thanks,
Brian

xlost6 wrote:
I'm currently thinking about purchasing the iPhone at the unsubsidized price which is $700 for the 32GB iPhone 4. But my upgrade is available until May 8 of this year.
I'm a kinda impatient person but working on being patient but I really do want the iPhone.
Has anyone bought the iPhone 4 at a unsubsidized price or was it subsidized?
I'm on a family plan also and my sister line (primary) and my mother line (month to month non contract) is available for upgrade. I can use those I hope...
Thanks...
Many people on here have bought the iPhone at the full retail price because their upgrade wasn't up yet. In your situation, I would advise you to wait until May 8th, it's a lot closer than most people's and it's a substantial discount when you wait. You'll save $400. Or as you've pointed out, you can use your sister's or mother's upgrades right now if they don't mind, and then whoever's upgrade you take can use yours on May 8th. That would also be a very good choice, rather than purchasing the full retail iPhone.

Similar Messages

Has anyone purchased the iPhone 4 full retail price?

I'm currently thinking about purchasing the iPhone at the unsubsidized price which is $700 for the 32GB iPhone 4. But my upgrade is available until May 8 of this year.
I'm a kinda impatient person but working on being patient but I really do want the iPhone.
Has anyone bought the iPhone 4 at a unsubsidized price or was it subsidized?
I'm on a family plan also and my sister line (primary) and my mother line (month to month non contract) is available for upgrade. I can use those I hope...
Thanks...

xlost6 wrote:
I'm currently thinking about purchasing the iPhone at the unsubsidized price which is $700 for the 32GB iPhone 4. But my upgrade is available until May 8 of this year.
I'm a kinda impatient person but working on being patient but I really do want the iPhone.
Has anyone bought the iPhone 4 at a unsubsidized price or was it subsidized?
I'm on a family plan also and my sister line (primary) and my mother line (month to month non contract) is available for upgrade. I can use those I hope...
Thanks...
Many people on here have bought the iPhone at the full retail price because their upgrade wasn't up yet. In your situation, I would advise you to wait until May 8th, it's a lot closer than most people's and it's a substantial discount when you wait. You'll save $400. Or as you've pointed out, you can use your sister's or mother's upgrades right now if they don't mind, and then whoever's upgrade you take can use yours on May 8th. That would also be a very good choice, rather than purchasing the full retail iPhone.

Has anyone purchased the Apple TV for Dummies book?

I saw this book yesterday at Border's and was half-tempted to purchase it since Apple does not offer a quality Apple TV user guide. But at $21.95 I thought I would ask here first to see if anyone has purchased the book...and to offer there opinion as to whether or not they think it is worth the money. Input anyone?
Thanks.

Doug Campbell wrote:
The reason I say the Apple instructions are poor are seen in this example. Take a look at #4 & 5 here http://docs.info.apple.com/article.html?artnum=305139#syncing . My Apple tabs do not look like that at all. They did in the 1.0 version but since downloading the new version the only tabs that appear are Summary and Photos. Despite what this link reads, I can no longer synch anything to Apple.
my tabs looks exactly like that.
the reason you only have 2 tabs is that you have set up itunes as a secondary library (you only get 2 tabs).... as a primary library you get all the tabs and the syncing functions. secondary libraries only provide streaming access.

Has anyone purchased the refurb macbook pro 1.83 for £928 from the UK store

If so what are your experiences please....
I can't afford a new machine so am considering one of these...
TA !!
intel imac 17" 1.83 ghz core duo Mac OS X (10.4.4)

I bought a refurb and have been pleasantly suprised. It looked brand new out of the package, and has been bug free. It seemed to freeze once or twice while in sleep mode, but hasn;t done that in weeks. I have been running it for ove a month now without problems.
To me, it was worth it!!!

Has anyone purchased the new Ipod from Argos (uk) yet?

Im going to be buying the ipod v2 30gb from there in the near future, but the other day i was told it does not come with a wall charger. Is this true? and also what is a dock adapter?
Thanks a lot, Lou

They are in the UK store under iPod Accessories under Power: Apple iPod USB Power Adapter

I have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same i

have a copy of Adobe 8 pro move it from my old laptop to the new an it said an serial number invalid i talked with someone was refered to life chat, nothing they could do, now im here, i ont thing i should have to purchase new, has anyone had the same issues and how did you get it fixed or are you in the same boat.

Hi Edward Guilliver,
As i understand you are facing 'Serial Number Invalid' Issue, I would recommend you to refer these Links for more information:
Link 1: https://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
Link 2: Error "Invalid serial number" | Acrobat 9 | CS4
Please let me know if any of this Link fix your issue.
Regards,
Rahul Tyagi

I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

I recently purchased a Seagate Backup Plus Slim portable hardrive. Despite Seagate claiming the product is compatible with OS X 10.5 I cannot get the installer to launch. Has anyone encountered the same issue and found a viable solution?

A Gigaware 9pin to 4pin fw cable solved my issue. The Rocketfish fw cable was crap. And that thing cost me $24.99 from Best Buy. Getting my money back for sure.

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

My daughter has downloaded free games from the App Store and I have been charged in excess of £200 and I don't know why has anyone had the same issue and if so how did you get your money back

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
To help avoid future transgressions set the Restrictions for In-App Purchases...
Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213

Has anyone put the RAR Background Job Spool on a different server?

We are on GRC 5.3 SP 13.
Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
I currently have it assigned to a folder on the GRC server, but it is running out of space. I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls. They are also resisting downloading the reports (more work for them). I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded. I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
Has anyone done this, and did you run into any problems?
Thanks.

Hello Bob,
I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
- Specific user to connect to FileServer
- Availability of the FileServer. If the FS is down, the RAR job will cancel.
- Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure, because it depends on a lot of things like network speed, server load, etc.
Maybe someone has already implemented it and gives you more hints.
Cheers,
Diego.

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

Has anyone removed the screen protector from Otterbox?

I have the Otterbox on top of Apple's anti-glare screen protector as suggested in this forum. I'm having way too much trouble getting a response out of buttons on the edge of the screen or in the corners. I touch and touch, even press hard but no response. Even getting the phone to snap a picture is near impossible. I have no problems when I remove the Otterbox case, so I know it isn't a screen issue. I love the feel and protection afforded by the Otterbox case and would like to use it. Has anyone removed the screen protector from their case, and if you have, can you comment on the subsequent performance of it? Of note, I use the Otterbox case because I have young kids who use the phone - we don't have a landline. In other words, it's not dust protection I'm looking for, but impact protection. I hate to tear up a $50 case if it won't function anymore.

I removed the screen protector that was part of the Otterbox case and it now works much better. Still have the Power Support anti-glare screen protector on it. Also removed the small cover over the camera lense and now my pictures are more clear. Finally, I removed the covers over the speakers and I can hear the speakerphone again. These mods made the case an A+ for me. A little less protection but much better functionality.

Has anyone tried the Zeiss Screen Eraser on their iphone 5?

Carl Zeiss company is known for fine optical gear. When I tried locally to find a flat-weave microfiber cloth for cleaning my iPhone 5, all I could find was a kit with the cloth and a Zeiss Screen Eraser, made for cleaning LCD screens and touch screens. The Zeiss Screen Eraser contains a soft sponge moistened with a solution that does not contain alcohol or ammonia. The pictures on the package show what looks like a Kindle or iPad, a Blackberry-type phone, and a laptop. So far I have resisted trying it on the oleophobic screen of My iPhone 5, using only the microfiber cloth, which by the way is high quality, which you would expect from Zeiss. I would very much love for Apple to test the Zeiss Screen Eraser and see whether it is safe to use on iPhone screens. In the meantime, has anyone in the community been brave or foolish enough to test it themselves? Thank you.

Here's what Apple recommends:
http://support.apple.com/kb/ht3226#iphones
Especially this part:
Keep liquids away from the product.

I upgraded to Mavericks and its running on my 2010 27" i mac. The Keynote, numbers, pages and mail ups have not changed. Has anyone had the same problem?

I upgraded to mavericks and it seems to be running ok. However, my keynote, pages, numbers and mail still look the same. The update section on the APP store tells me they have been intalled but that is not the case. Has anyone experienced the same issue?

You have to download them from the app store. They should come up under the update option if you already have the iwork apps. They are available for free (thanx apple) if you go to the store after installing Mavericks and select them.
Now don't be thrown off because the link (icon) in the dock is the same. There is a updated icon for each app. I got thrown off because I had purchased ilife before the app store and back then, all would go into a folder (iWork '09). I could launch the old apps from the 09 set even after I installed the new ones from the app store. Some of us find this a godsend as the options on the new apps are lacking some power options.
Download the new apps and just pull the old icons off of the dock and watch them going up in a puff of smoke!

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?

Has anyone bought the new ATI/MSI RS480M2-IL s939 motherboard yet?
If Yes, How is It?
This seems from what I've read at least to be a good or even great overclocker, It's too bad that It isn't a full ATX motherboard, Maybe If sales are good enough MSI will use this chipset on a Full size ATX motherboard one day. Of course It does have an Integrated ATI video card in It and It have as much as 128Mb ram for the pci-e built-in video or You could add a separate pci-e video card in the 16x slot. It's $94.00 right now on pricewatch.com of course.
http://www.msicomputer.com/product/p_spec.asp?model=RS480M2-IL&class=mb

Quote from: mamisano on 23-February-05, 12:27:21
Ordered one for a home workstation from ZipZoomFly.com. Also picked up a 3000+ and already have 1GB of Adata PC4000. Will be utilizing onboard video until I have the need/desire to upgrade to PCI-Express video card. Hard drive will be a new Maxtor 250GB ATA-133 16MB Cache that I picked up from CompUSA for $99/no rebates :D
I will post my thoughts after the system is together, should have parts by Thursday/Friday.
Well at least You aren't buying from Logic Circle Systems That place will ship incompatible ram that is Intel approved and say then It is You cpu that is at fault, I should know I'd bought zoom3's motherboard and some Wintec ram(Samsung chips ending in TCCC) and They said they were tested and AMD approved(They aren't, Wintrec is Junk on an AMD Platform), I now have a Corsair CMX512RE-3200LL Dimm and My cpus work fine at PC3200 speeds and above, Logic Circle Systems said was at fault. Logic Circle Systems is a bunch of Liars and are not trustworthy.

Has anyone replaced the inside piece to the charger on a Satellite?

Has anyone replaced the inside piece to the charger on a Satellite? I broke it and I feel like I may be ab le to fix it if I can get the overtorqued screws out. I would also have to find the proper part.
Any help would be appreciated!

I haven't done it but you can go here to compare
temps of people who have done the fix.
If you look at the values, they vary extremely.
The dual core chip set is designed to run hot... The case, on the other hand, is another story.
For what it is worth, I think all youse guyz are focusing on the wrong issue... the case design. The chips are meant to be quite warm as they do their job, but the case's exhaust goes in FRONT of the LCD screen, just above your function keys.
The keyboard area above the power inverter and airport card is not thermally shielded, so heat goes up, through, and past the keys (QWE ASD area). The bottom of the case plastic has no thermal layering, hence you get hot legs.
Elevating the back of the MacBook helps tremendously.
Knocking back the duocore CPU temperature by an across-the-board 10 - 15 degree hit will still result in a very hot computer.
It is the case.... The case is the problem child.

Has anyone purchased the Hangover Part 2?

Similar Messages

Maybe you are looking for