Has anyone put a g4 logicboard in a g3?

With all the logic board replacements and the lack of Apple support for the G3's in video could I put a iBook G4 logicboard into my G3? They are both spec'd at 14.1"--It would be nice to ramp up to a 1.33Gz.
I'm sure this has been asked before but I looked in this forum and the iBook USB duel and could not find any ref. except for someone that wanted to change just the CPU....

Hi Glynn
I'm sorry to say that it won't work, well atleast be reliable and cheap. The problem is that the G4 runs hotter, you'll end up cutting the board, and its expencive. Your best be is to sell it and put the money for G4 iBook.
b The link below might help you understand why
http://www.applefritter.com/node/8655
I myself am fixing my fathers iBook. I'm going to upgrade it to the best G3 chip, memory and what not. I'm also going either make the case clear or black, and change the apple logo red or the striped like the origional logo. Well I hope that helps, Good Luck!
Jon

Similar Messages

  • Has anyone put the RAR Background Job Spool on a different server?

    We are on GRC 5.3 SP 13.
    Has anyone put the RAR Background Job Spool File Location (assigned in the Miscellaneous configuration section) on a server different than the one that the GRC Frontend/Java system is on?
    I currently have it assigned to a folder on the GRC server, but it is running out of space.  I am having a problem getting the users to delete old reports as they say they need to keep them for internal Audit controls.  They are also resisting downloading the reports (more work for them).  I have been told that we cannot easily increase the file space on the GRC server (would basically have to purchase more storage and rebuild the server).
    I was thinking about moving the folder over to our virtual storage area, were file size can be more easily expanded.  I haven't found any documentation that says the folder has to be on the GRC server, but I also haven't seen any examples of where it has been put on a different server.
    Has anyone done this, and did you run into any problems?
    Thanks.

    Hello Bob,
    I got your point. Probably there's no recommendation about this, because the recomended practise is to delete or archive the spools as suggested in note : Note 1511027 - Periodic clean up of spool files
    If you have a requirement to keep these files "online", I think the option to save them to a network drive is fine. I haven't tried it for this specific scenario. You have to take into account:
    - Specific user to connect to FileServer
    - Availability of the FileServer. If the FS is down, the RAR job will cancel.
    - Performance. I mean, write to a local disk is not the same to write to a network drive. This point is very difficult to measure,   because it depends on a lot of things like network speed, server load, etc.
    Maybe someone has already implemented it and gives you more hints.
    Cheers,
    Diego.

  • :( Has  anyone  put card  reader into  cd/dvd drive  by mistake ?  If  so how  do i get it out  without  breaking  drive  :(

    Has  anyone  put card  reader into  cd/dvd drive  by mistake ?  If  so how  do i get it out  without  breaking  drive 

    Thankyou  !!!!!  Its  worked  !  Was going to  cost me  a lot  just to have it  looked at  without anything  being done  .....  I cannot  believe  how  simple  this  was 

  • Has anyone put 2 and 2 together yet to combine TFL with CSS?

    Simply put, I love the fact that Flash Player has a new text engine because the old one sucked and this seems like a big improvement.  However, it would seem to be immensely MORE powerful to combine this new text engine with a CSS parser that actually works right and supports current CSS standards (believe it or not Adobe, the rest of the world uses CSS2!).  That is my feature request! Let me know if you hear of anything, I know others are looking for similar functionality.  Thanks!

    The IFormatResolver is an API that could be used by an application that can parse CSS to do just that, but you would have to supply the code that uses the IFormatResolver to connect the two together. TLF doesn't supply this functionality (although I agree it would certainly be good).

  • Has anyone put more than 8 languages on a single DVD?

    I've set up the 9th language stream on track 2. Is this how it's done with only 8 streams per track?
    Thanks,
    Brian

    if you have enough room on the disc for two copies of the footage, then what you are doing is an acceptable way to go. make sure your menu buttons link to the correct track, and force the correct subpicture stream to play.

  • Has anyone successfully put varnish in front of web service?

    I've got server app 3.2.1 on a mac mini server.  love the machine, but want to put varnish in front of the web service.  so far it's been a hassle.  I can't even get the 0000_any_80_site.example.com.conf file to listen on 127.0.0.1:80...
    I start varnish on port 8081, confirm it is running, tell it to look at the backend and apache won't talk to it.  I've added the "Listen 127.0.0.1:80" directive to the http_server_app.conf file in the /Library/Server/Web/apache2/Config folder. 
    I tried to edit the any_80 conf file for the virtual host I want to test, and I've tried it all.  I've tried to change the <VirtualHost *:80> to <VirtualHost 127.0.0.1:80>, I've added the Listen 127.0.0.1:80 line to the conf file, and no matter what, varnish reports that the backend is sick and it can't get the file.
    To clarify, I browse to the virtual host's domain and add 8081, so the browser is site.example.com:8081 and when going I get varnish responses, but varnish says it can't backend to respond.  Varnish is set up to probe 127.0.0.1 on port 8081.
    has anyone done this successfully?

    I'm using varnish 4.0.0 installed via homebrew.  Here's the backend definition from the vcl:
    backend server1 {
      .host = "127.0.0.1";
      .port = "80";
      .max_connections = 300;
      .probe = {
      #.url = "/";
      .request =
      "HEAD / HTTP/1.1"
      "Host: localhost"
      "Connection: close";     
      .interval = 5s; # check the health of each backend every 5 seconds
      .timeout = 1s; # timing out after 1 second.
      # If 3 out of the last 5 polls succeeded the backend is considered healthy, otherwise it will be marked as sick
      .window = 5;
      .threshold = 3;
      .first_byte_timeout     = 300s;   # How long to wait before we receive a first byte from our backend?
      .connect_timeout        = 5s;     # How long to wait for a backend connection?
      .between_bytes_timeout  = 2s;     # How long to wait between bytes received from our backend?

  • Has anyone heard of the ucs blades crashing, like all of them, when/if you put esxi 5.5 into LACP?

    our VM guy here was trying to use LACP to solve an issue with ESXi and vmotion. He was on the phone with vmware and when it came down to putting the one blade he was working on in LACP the vm ware tech said that he would not do it because it would crash all the blades? has anyone heard, read or seen this? we are using ucsm 2.1.3.

    ok, i talked to our vm guy some more and got some clarity. he stated that the vm ware techs told him that when they activate the LACP on vsphere 5.5 that it will drop all the hosts on the blade (much clearer than all the blades as i stated before). 
    so what we are looking for is 1. proof of this statement. 2. if true, is there another option available that does not include dropping of the hosts? the documents from vmware say at the bottom minimal network disruption, so what is the delta for that? my idea of minimal disruption is no loss of hosts and a few lost packets. 
    im good with a bit of spotty network connectivity while the system converges after a change but i wont complain if it does not drop anything.

  • I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • Has anyone got a script to read a list of email addresses from a Mail message and put them into a group in Contacts?

    Has anyone got a script to read a list of email addresses from a Mail message header and put them into a group in Contacts?

    Now Tony, I know you can't hear my tone on a forum post but I was not complaining, simply stating facts . This change brought several people in my office to a grinding halt in a long established workflow that is really rather simple (and I thought was already assumed from the original post above ):
    1) Select a set of records in FileMaker Pro 12 and export only their e-mail addresses as a CSV file.
    2) Open that CSV file in Excel.
    3) Copy the column of e-mail address.
    4) paste into the appropriate recipient field in Mail.
    5) Send
    If I were to complain it would be about Apple's typically opaque approach to updates. There is no granular explanation of why changes were made or even "what" changes were made.
    Complaining is futile since Apple is Apple and is unlikely to change, but sometimes it is cathartic to "shout into the void" .
    I had thought about doing something with a formula in Excel and your suggestion was simple and helpful. Again, however, it is only a workaround for a long established helpful behavior that Apple has inexplicably broken/removed in Mavericks Mail.
    I, and the other posters here, would love to have the capability back rather than have to add previously unneeded steps to our workflows.
    Ultimately we may add scripting steps to the FileMaker side to export the address lists with commas inserted already if Apple ends up having permanently removed this feature.

  • Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Has anyone else had a problem with their nano sim slot bending snapping or breaking when they put their sim in!? I have had to order a replacement and only had the phone 5hours!

    Hannahjadepurnell wrote:
    From giffgaff.
    i Don't actually mean when you put it In the phone. I mean when you try to take the slot out of the phone with the pin. As soon as I pulled it out it bent.
    That makes less sense as the sim tray a fairly stiff metal and should be pulled straight out once released. You didn't answer the question about where is was bought. Is is a real iPhone?

  • I'm trying to recover my security questions, but my alternate email address on the link does not match the one I have put in my Apple ID, on the link it is has an old one that no longer exists. Has anyone else been through this or knows how to help m

    I've been trying to remember my security questions for ages, and I can't seem to remember them. On my Apple ID I have changed my alternate email address because the previous one was deleted, but when I go on the "Password and Security" page on my Apple ID and there is a link saying "Forgot your answers? Send reset security info email to ************@*******.com" but it is giving me my old email that does not match my current one on my Apple ID and no longer exists. I have been trying for very long to recover my security questions' answers, but Apple is not coping with me.
    Has anyone been through this or knows how to help me?
    Thank you.

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

  • Has anyone else put in for the Mountain Lion upgrade and not received a reply from apple

    Has anyone else gone through the update to Mountain Lion site and not heard from apple?

    a lot of us haven't heard back....
    takes a minimum of 72 hours since everyone wants it now...
    be a little patient and you'll get yours soon...
    cheers..

  • Has anyone been in a similar situation?

    Here's my situation:
    In the past four months, my Powerbook has been posessed by the devil. Not that it hadn't been before..::wipes brow::. New combo drive, new display, new keyboard keys, new logicboard, new..something else that I know I repaired, but don't have the receipt in front of me. Then it works fine for a week. Then on the 17th of May, my hard drive fails. So Apple will replace the combo drive, logicboard, AND hard drive? The geniuses say it will take care of everything and prevent further issues, which is great now that my warranty expired on the 18th. (phew!) The question that I pose is, has anyone else been having similar problems and has this solution been a good fix?
    They informed me this morning that the logicboard from Apple will be arriving in ten days, so I have plenty of time to discuss the repair. By the way, today is the 27th, they've had my computer since the 17th and I'm waiting 10 more days. Is this normal for working through Geniuses? I've always gone to MacAuthority, an authorized repair center and I get it back in 5. Hmm.

    Hello Lauren,
    In this kind of history, I was able to noticed in my career in computing two big causes:
    First one, rational, the one that everybody likes thinking, the defective material or the product not succeeds (as we see it more often on PC ;-))
    Second, less rational, rare but very alive cases: persons possess a very strong magnetism that no computer resists... These persons exist and I met it. Indeed on, we do not want to believe in it... But due to noticing certain very real facts and with no sens, we are obliged well to believe in it...
    Ex: Mac is Uptime for more than 60 days, its process is common and no shady software (kind Powerpoint or Word) works above. A person possessing a very strong magnetism enters in the room and then the computer bugs and the only appeal is a forced reboot... We made all the vérificatiion after...No explication...
    I knew similar cases in your, who due to using their new computers, they had to put it in the dustbin ...
    The solution... Make verify your magnetism and if it is the case, for controling this magnetism and limiting the damages in the future...
    Have you the same difficult with others systems ? (TV, Cell Phone, Video Recording, etc.)
    I'm so sorry for you.
    Regards
    David
    PS : Excuse me for my english.
    Al PowerBook 15 - 1.67 / 128 VRAM / 1GB RAM / 75 GB ROM Mac OS X (10.4.6)

  • Has anyone been successful importing h.264 into Encore?

    First, my system and goal:
    A MacPro with 2.66mHz dual core and 12 gigs of RAM.
    Multi Terrabytes of space.
    I shoot on a Panasonic HVX-200, edit in Final Cut Pro and output Quicktime files as the basis for rendering to DVD and Blu-ray. I shot this stuff in 1080i. The camera codec is DVCPROHD and that is what I output to also.
    I am trying to burn Blu-ray discs. I have an external Pioneer BDR-203 Blu-ray burner and it works fine.
    I have done my tests and have decided that for Blu-ray, h.264 is far superior to mpeg2 in look and file size so I am sticking with it.
    Here is the issue (and I have scoured this forum area and found no one discussing or solving this issue to date):
    I have made hundreds of different DVDs with DVDStudioPro and am very familiar with it. Not to get off on a tangent but my beloved Apple has decided to betray me by not supporting Blu-ray (the ONLY way to output HD for us independents) so I studied up on Encore and have been using it to format my latest project to HD. The interface works pretty nice and even has some superiority to DVDSP but you have to have the patience of JOB to see your results. 5 Day (Remember. That's 24 Hour Days) Rendering is my tops so far. (OK. Full Disclosure... the documentary is 3 hours and 15 minutes long BUT DVDStudioPro took the same Quicktime files and crunched them down to mpeg2 for the DVD in about a day) Anyway about 6 days ago I had a 3 day render session that crapped out on me as it was finally recording to disc. For some reason it didn't like the BD-RE disc I had in the machine and just bagged the whole process. When I put in a new disc it just started rendering All Over Again. After that debacle I gave up on that method and now am rendering to BDMV folders which I then burn to disc using Toast. (While I am writing this my fingers are crossed that it will make it to the end - it's been another 3 days...)
    I provide the details above to show why I am more than dismayed that I cannot figure any way to import h.264 files INTO Encore from another renderer. Either Compressor or Encoder render much faster than Encore. So I have tried render my project to a variety of output types from both Apple's Compressor and Adobe's Encoder with no joy any way I try.
    (as a side note I am also dismayed that when I made a change to a MENU, Encore decided to encode The Whole Project Again rather than just the menu part...)
    One of my latest file testing adventures was based on a theory that the problem has to do with DVCPROHD recording to 1280 x 1080 anamorphic rather than 1440 x 1080 (the "expected" frame size for 1080i). I fooled with that a half day but could not get either renderer to generate any test material from my FCP output that Encore would burn without re-rendering. By that I mean I cajoled and tricked Compressor and Encoder to output 1920 x 1080 files; 1440 x 1080 files and 1280 x 1080 files (all h.264) to see if Encore would recognize any of them without re-rendering them. No Luck.
    So. Has anyone had success importing h.264 into CS4Encore from anywhere (but particularly using the same or similar gear I am using)? The Encore literature really doesn't give you much to go oon.
    Lately I am very inclined to think the problem has something to do with this 1280 x 1080 DVCPROHD issue but I can't say for sure. I offer that as a suggestion if anyone else with a similar production stream is having the same problem and maybe it will trip a switch in their mind for a solution.
    I like the Encore interface and design possibilities you have by swinging back and forth from PShop and After Effects but using Encore's renderer is like Chinese Water Torture.
    Thanks for your help.

    Brian,
    I got your test file into Encore and got Encore to show its Blu-ray transcode status as "Don't Transcode".
    Screenshots:
    PrCS4 Export settings:
    EnCS4 Project Panel:
    Since it's hard to make out the En Project panel, I'll attach the same image to another message.
    -Jeff

Maybe you are looking for