Has anyone seen their iPads using your wifi non-stop, even if you are not using it, even when it's closed with the smart cover?

Lately my internet usage is up to the roof. I though somebody was hacking my wireless router so I made it super safe with lots of restrictions.
But that didn't stop the download of stuff over my wireless network. When I monitor who or what is using my wirelss, only my iPad was on, so, the moment I turn the wifi off on my ipad, the download stop. Turn it back on, it goes like crazy sucking up data off my wireless router for no reason. There is no indicator that the iPad is using the wireless yet, it is my iPad downloading things that I can't even seen, it does even with smart cover on!!!!. It's been over 50GB in only three days. I don't even have that amount of data on iCloud. This began a few days later after I upgraded my iOS to 6. But also, I'm thinking it could be an app that I installed. Or is it possible someone can use my iPad as a middle point to access my router and steal my internet. I have restored the OS on the iPad and it keeps doing it. Anyone has experienced something similar?

I'm going to guess that your battery life is also not so hot. What I suspect is happening is thatbthe pad is locked into an update loop with I cloud. As an example, if you have addresses that do not agree, the cloud back up will continue to try and correct itself, using both battery and wifi ( or cell). It may also be an app trying to uzpdate itself.
To troubleshot, try turning thigs off. If you are using the cloud, turn off all syncing and see it the problem stops. Then turn them back on, one by one, until you find the culprit. If it is an app, it may be harder to find, but the steps are the same. Turn off all notifications, and uninstall anything you added around the time the problem started.
A frequent culprit is magazine, comic, and newspaper subscriptions, that are constantly trying to update themselves.
Keep looking, you will find it.

Similar Messages

Has anyone taken their iPad 3 to Apple over Wi-Fi issues?

Has anyone taken their iPad (3rd Generation) Wi-Fi only model to an Apple store and tried to use AppleCare to solve their Wi-Fi issues?
*Start: Problem/Rant*
I had an iPad 2 Wi-Fi only model and I never had an issue with it. When the iPad (3rd Generation) was released, I went ahead and bought it. However, from day one, I never had the wireless strength of my iPad 2.
I'm a college student, live in a dorm, and I am fairly tech savvy. This problem confused me for the longest, as no environmental factors had changed and my iPad 2 would still connect at full bars. I read on some forums that many new iPad 3 users had reported that their new iPad had poorer signal strength in general after running many different diagnostic test. Apparently the radio in the device isn't as good picking up reception as the iPad 2.
After conducting some dB tests of my own, I found this to be true indeed. But I could live with it, as my iPad (3rd Generation) still connected to Wi-Fi for my dorm (as I am close to an access point). However that wasn't the end of my problems. Anytime I watched Hulu, Youtube, or streamed a movie that was at least an hour long, my wireless signal would drop completely and would pause the video to give me a blue pop-up box stating that I had no Internet connection.
I noticed that my wireless icon had gone away, but after about 1 minute it reappeared. The video wouldn't resume, so I had to refresh the page and go back to where it got stuck previously. A minor inconvenience, but still a problem. The first time, I wrote it off as a legitimate Internet problem on my campus's part. However, the same problem occurred again, about an hour later. I quickly went to my computer and tested the connection and I still had Internet. After this point, I setup two wireless devices on the same network and waited for it to occur, and when it did, I was able to conclude that it was my iPad's fault.
In the interest of getting it to work and my own curiosity, I tried all the standard troubleshooting steps such as: Rebooting the iPad, restoring the iPad, connecting to various encryption types such as my campus WPA and WEP network types. I even got a wireless router with a direct Internet connection, turned off the encryption and tested this on different channels and even g/n networks. I still get one to two minute periodic wireless network drops.
I've had this iPad 3 since launch and aside from the Wi-Fi thing, it has been great, but it has finally gotten to me. The other day, I was running low on time and was uploading my professor's notes to Dropbox that I had recorded on my iPad when the signal gave out for it's regular wireless fail and it ruined a presentation. Yeah, first world problems, but when I paid so much for this and have invested so much of my own time to fix something that should of worked in the first place, it is kind of infuriating.
/end rant
I am going to an Apple store tomorrow and using my AppleCare warranty while telling them my problem and hope that they can fix it. However I am worried that since it appears to be a hardware issue, that they won't be able to fix it. Also my iPad 3 has no screen protector and even though it is used, it is in perfect condition (I used a case for the exterior). I don't want a refurbished model which may have minor scratches (on a retina screen this would drive me insane). I am OCD about keeping my expensive stuff safe and scratch free. I know that I should of brought it in the moment I noticed the issue, but I was secretly hoping that it was just a bad firmware/software issue that would of been resolved with iOS 6.0 (obviously it wasn't) and my store doesn't accept returns on any Apple Products (Barnes & Noble) even if you open it in front of them, however they do offer AppleCare which is what I am hoping can fix it. I'm still within my year warranty, have the original receipt and box.
Does anyone have any experience with a similar issue or a wi-fi issue at all with the iPad (3rd Generation) and using AppleCare? I've read horror stories about employees doing terrible things and is it safe to not restore my iPad and just hand it over to them? I know this is just me being lazy, but is it alright for me not to delete/restore my iPad before handing it over to them? Like I don't have to worry about them posting on twitter or checking my email? After two semesters, it is kind of a hassle to put everything back on there, anyone have any bad experience just handing it over?
Lastly, is there anything I should do, before handing it over to them? Like taking pictures of what it looked like, before they handled it? Is there a way to register with Apple the MAC address of the iPad so they know that I am the owner? (well, I guess my email should be associated with that).
I know it is a long read, any questions answered would be appreciated (it doesn't have to be all), and if people want, I'll update on my experience with AppleCare regarding my issue and if it gets resolved.

I've seen a few posts from users that had wifi problems getting a replacement iPad.
A refurb iPad has a new screen, battery and back plus warranty.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Has anyone seen this file on your mac? i'm worried it's malware. "WirelessDiagnostics-C0*******KQ4"

Has anyone seen this file on your mac? i'm worried it's malware. "WirelessDiagnostics-C0*******KQ4"
<Edited By Host>

It's not malware. It's a report generated by the built-in Wireless Diagnostics application.

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

Hi, I'm currently browsing the web looking for a case that is compatible with the smart cover for the iPad 2. If anyone has any suggestions I would be glad to read all opinions! Thanks!

I love the Smart Cover. It fits the way I work and I love the instant on/off and the always available screen protection. I wouldn't use my iPad without it.
I got a Cover Buddy for the back, because I wanted the back to be less slippery when I'm using the iPad in the classroom, teaching. I picked this back cover because it's VERY lightweight, easy to get on or off and, protects the corners, has accurate cutouts for the ports, and (in the colors) has a rubberized surface:
http://www.switcheasy.com/products/CoverBuddy/
I have a Built NY "hoody" slip on case with a hard internal shell that I use when I'm in the field and I can put the iPad with the Smart Cover and the Cover Buddy inside this . But for everyday use, the Smart Cover with the Cover Buddy is a terrific combination.

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

How much time can an ipad mini stay in sleep mode with the smart cover on

How much time can an ipad mini stay in sleep mode with the smart cover on?

Hello Kavans,
Thank you for the details of the issue you are experiencing with your MacBook Pro. I recommend reviewing the following article for this issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Thank you for using Apple Support Communities.
Best,
Sheila M.

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

'You Are Not Using The Correct Type of Phone Cord' Error

Having a issue with my fax on my HP Officejet Pro 8500 wireless. Tried to send a fax, it received a send error. I ran fax test and it came back with "You are not using the correct type of phone cord". Nothing has changed since I last fax'd but I check the lines and connection, everything appears ok. Phone jack is connected to 1-line and Officejet '2-ext' is connected to the phone. I use a dedicated phone # and the Officejet is set to auto answer. I can call out and receive calls on the phone connect to the Officejet. My assumption is that since I can use the phone without issue there is nothing wrong with the phone line. Any ideas?
This question was solved.
View Solution.

I was having the same problem. I'm using a the 2 wire phone cord provided with the printer and still getting this error. Turns out that it related to have a phone extension plugged into the printer. If I unplug the telephone form the extension jack on the back of the printer, then the fax test passes. I was even using a 2 wire cord on the phone extension but it seems that simply having a telephone plugged into the extension jack will cause this error.
Run the test without a telephone plugged into the printer's extension jack and you should be fine.
Worked for me!

Got a bug saying You are not using af:panelFormLayout which you must ??

Hi
I have got a bug saying You are not using af:panelFormLayout which you MUST. The label colors dont match standards, and the spacing between controls doesn't match standards. We need all pages to use the default ADF controls inorder to ensure consistency throughout application.
In my page there are lot of panelGroupLayouts, Am i supposed to change all of them to panelFormLayout.
If not , what exactly am i expected to do??
Thanks a lot in advance
Sajith

As Frank already said, this must be a rule your company added to the code audit rules. It's not up to us to decide is you have to change all panelGroupLayout to panelFormLayout.
You should try to find out why you get the message in the first place (or who added the audit rule to use panelFormLayout).
Timo

Does windows and mac run continuously using parallel, or is there some way to stop xp from running if you are not using it?

I would like to run a few windows programs but I dont want the mac side to suffer when i am not using the windows os. Is there some way to shutdown the windows part when you are not using?

If you are running MS Windows in Parallels or Fusion or any other virtualization software you can shut it down while the machine is operating and still run OS X. There is no trick, you shut down MS Windows just like you would with any other MS Windows machine. That is one of the main advantages of virtualizaiton software, the ability to run both environments simultaneously if you want. If you don't want to run Windows then simply don't start the virtualizaiton software or if it's already running quit it like you do any app on a Mac.

If you are not using J2SE 1.4 - OrderedMap - (maintains order of insertion)

Hi,
If you are not using J2SE 1.4 and still want to maintain the order of insertion unlike HashMap or Hashtable(which doesn't allow)
OrderedMap comes to resue!
import java.util.ArrayList;
import java.util.List;
import java.util.TreeMap;
public final class OrderedMap extends TreeMap {
     private List list= new ArrayList();
     public OrderedMap() {
     public Object put(Object key, Object value) {
          list.add(key);
          return super.put(key, value);
     public List getKeysList() {
          return list;
};;Mail me how to use it!
Bye
tuniki
[email protected]

Hi, Dude!
Probably you have to read the subject b4 posting something!
(Re: If you are not using J2SE 1.4 ->OrderedMap ->(maintains order of insertion))
Tuniki
[email protected]

How do I stop this please You are not sharing your location. Sharing your location helps provide searches that are geographicaly closer to you

When I go to this website it's giving me this
You are not sharing your location. Sharing your location helps provide searches that are geographicaly closer to you
This pops up how do I stop it there is NO x
Thank you

You can set the default setting for Share Location for all sites on the about:permissions page.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
The about: protocol is used to access special built-in pages.<br />
You can open built-in about: pages via the location bar like you open a web page and in most cases you see a special orange Firefox icon on the location bar.

Has anyone had their iPad Air crash after a hardware update?

2 updates ago, I updated the operating system on my iPad air and the update fried my iPad. Has anyone else had this happen? I am very hesitant to update again

Hi,
Under Fusion you have Window, then you select Virutal Machine Library.
Once done, on your left you got the al your virtual machines.
Delete your windows xp virtual machine.
Then you select Add -> New Boot Camp and all your stuff will be back.
Cheers,

Has anyone noticed their iPad is slower and freezes with the new IOS 7 upgrade

Is anyone having problems with your iPad freezing with the new operating system

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Has anyone had their iphone 4 die on them? Mine is just 2 yrs old and won't switch on, tried all the remedies, reboot, tried to connect and reboot via itunes, new battery--nothing works

Hias anyone had their iphone 4 completely die on them? Mine won't switch on, I have tried using the power key with the home key, tried connecting it via usb cable to itunes, tried new battery- nothing has worked. The phone is just 2 yrs old this month, and I haven't dropped it or anything. I have never had a phone break on me before in almost 20 yrs of having mobile phones- I've had to resort to using a 7 yr old Nokia, which I used to love but it's not the same as my iphone!!

If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

Has anyone seen their iPads using your wifi non-stop, even if you are not using it, even when it's closed with the smart cover?

Similar Messages

Maybe you are looking for