Has anyone seen this? All by "c's" in a font are "blocks" upon export!
It was a fairly short (test) project. Upon export, every "c" in my text was "blocked." What gives?
Nope. It's Helvetica, factory-installed FCPX. (Not 3rd party.) Never had the problem before. Doesn't happen with other fonts. I re-exported ("shared") and the blocks disappeared.
Then... it showed up again intermittently. Trashed prefs. Yep. It's a genuine bug, even if it's one-of-a-kind that is particular to my system, at this moment.
I'm not terribly worried. But, I'll be interested to see if it replicates itself inside other machines running 10.0.8. Hopefully folks will, literally, keep us "posted."
Similar Messages
-
My phone's display has changed as if it were stretched like we can do with photo's except it affects the whole phone. It won't go back to a normal display even after shutting it off and restarting. Has anyone seen this and how did you resolve?
Thank you...this did the trick. I had forgotten about that zoom feature. Now I will ALWAYS remeber it!
Thank you,
Deb -
Has anyone seen this display problem?
I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
Thank YouI wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again. -
We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,Motion 4.0.3
It just doesn't seem to recognize the alpha at all. -
Has anyone seen this problem? :(
Hey Everyone,
I picked the new white 30 gb ipod video up yesterday. I opened it set it up and transfered all my vids and music. Now my problem is the clickwheel. It scrolls about 200 (literally songs at a time and is not acurate with the amount of contacct i have with it. I tried resetting, and now restoring. What shouold I do? Has anyone seen this problem yet?
Anything helps,
J.MartinSounds like a strange HW problem. Before you return it, I'd try a Restore, resync, and check it. If it STILL does thast, you need to check with Apple Support.
-
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love -
Has anyone seen this file before ImageProxies.apdb?
has anyone seen this file before ImageProxies.apdb
my iphoto is all messed up.Yes I have seen it.
Thanks for sharing.
Regards
TD -
Has anyone seen this voip soloution yet?
Has anyone seen this voip soloution yet advertised on Nokias website?
if you take a look at this page it looks like nokia and avaya are getting ready to release a new voip client that can work on series 60 and series 80 phones. it looks prett cool, but i have no idea if this will look at any voip server, or a companies voip server.
i am guessing that this will be worth a look once it is released, after all it seems the mail for exchange client is now working on Nseries phones which is cool.Hello,
As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
I hope that it will take not a lot of time for AVAYA.
I'll let you know about the results.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8 -
Opening a self serve yogurt shop where you use a scale to weight product the weight goes to ipad to cdalculate price. Has anyone seen this application or process? Please help?
I understand the inconvenience you are experiencing when working with Office 2013.
If you have any feedback about Office 2013 product, click the and submit to Microsoft.
Microsoft will decide how to fix the problem for all customers.
For the activation mechanism, it intends to protect customers of their rights and interests.
For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
http://technet.microsoft.com/en-us/library/cc178982.aspx
For the problem Office 2013 keep crashing, check the following link to check:
http://support.microsoft.com/kb/2813143/en-us
http://support.microsoft.com/kb/2758592/en-us
Thanks,
Tyor Wang
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no
help.
If you have any feedback on our support, please click
here -
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...
Try this article (disable firewall)
http://support.apple.com/kb/TS2799 -
Itunes doesn't display graphics, only text, has anyone seen this?
Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?
I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back. -
some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?
cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions... -
Has anyone seen this behaviour of AccessHW In Port?
Yesterday I was trying to check the operation of a plug-in PCMCIA parallel port, specifically I wanted to know if there were any timing issues with this device on an XP machine, so I thought I would try the AccessHW In and Out functions in Labview. I installed an old copy of Labview 6.1 (It was 5:50PM and I wanted to do this fast!) and tried it.
Reading the memory location where the device's status port was supposed to be just returned zero. Strange, I thought, so I tried some other addresses in the I/O range. I got zero from every single one. I tried the same on my own laptop, which is also XP, and I was getting sensible numbers from addresses in I/O space.
Has anyone seen this behaviour? The machine has McAffee on-access protection running, which cannot be disabled (company IT policy), and I have a suspicion that this might be blocking accesses to low memory, is this possible?Sorry... my mind is not working well this morning You had mentionned that in your original post and the fact that it is a PCMCIA parallel port.
As for the address location, I have seen addresses in the 0x2000 region for add-on parallel ports (not PCMCIA).
I haven't used a PMCIA device with Win-XP. Does the address info for that port appear under properties when you look at the HW devices within the Control Panel's System. From what I can recall, you can change the PCMCIA serial port number within the HW device, so maybe the properties will list the address..
Have you checked this?
RayR.
Message Edited by JoeLabView on 07-02-2008 11:20 AM -
Has anyone seen this MacBook Pro 15" 2008 problem before?
Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
Has anyone seen this before, or have any advice about how best to proceed?
I have put a video of the symptoms here:
20120915 135612 - YouTube
Thanks for reading. This is my first post so apologies if I've rambled a bit!
Steve
MacBook Pro 15", late 2008.I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.
Maybe you are looking for
-
I cant get two monitors to work on one pc.
Does anyone know why i cant get two monitors working on one pc? I have a HP P6 2000 UKM computer, running windows 7 and it has a DVI D socket as well as the standard VGA (which i am using for my primary monitor) I have got the right DVI to VGA adap
-
If iPhone 4 is bad hardware, will a new phone be exchanged for this one?
After reading all the problems people are experiencing with the iPhone 4, I still have hope and have yet to give my final judgement on it's competence. I will tell you that I too have been experiencing the same signal issues and dropped calls, even w
-
My Application is handled by three load balanced servers.I have a functionality in which first i send a request for a document printing.This request is posted in Database.Then a backend script runs and takes each requets in DB and executes and create
-
and finaly, something new. the phone (3 days i have it-brand new) restarts onits own whenever it wants. SHAME ON YOU.
-
Stock Cat. group in Location master
Hello, Could somebody please let me know how the field "Stock Cat. Group" is used in the location master under the SNP tab. Thanks,