Has anyone seen this Dyld Error Message: Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto Reason: image not found
Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not found
Yes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD
Similar Messages
-
how do i repair this?
Dyld Error Message:
Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport
Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand
Reason: image not foundI just tryed it and this what i get now,
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x933efb7a __sem_wait_nocancel + 10
1 com.celemony.MelodyneEssentialRewireDevice 0x0c9211b4 GNCondition::waitForSignal() + 32
2 com.celemony.MelodyneEssentialRewireDevice 0x0c920d4f GNMessagePort::registerMessagePortWithName(GNString*, GNData* (*)(GNMessagePort*, GNData*), int, int, GNDictionary*) + 315
3 com.celemony.MelodyneEssentialRewireDevice 0x0c8c2dbe GNReWire2AudioDeviceHost::create() + 172
4 com.celemony.MelodyneEssentialRewireDevice 0x0c8c0f3f RWDEFOpenDevice + 89
5 se.propellerheads.rewire.library 0x0c84584e 0xc841000 + 18510
6 se.propellerheads.rewire.library 0x0c8459b8 0xc841000 + 18872
7 se.propellerheads.rewire.library 0x0c8488e0 RWPUnregisterDeviceImp + 5438
8 se.propellerheads.rewire.library 0x0c846689 RWM2OpenDeviceImp + 57
9 com.apple.music.apps.MAAudioEngine 0x02b1ac13 ReWireUpdateMIDIInfos() + 3427
10 com.apple.music.apps.MAAudioEngine 0x02b02e9f MD::Init(int, bool) + 2367
11 com.apple.music.apps.MAAudioEngine 0x02b0c852 GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 10514
12 com.apple.music.apps.Logic 0x00a7d59e CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 384926
13 com.apple.music.apps.Logic 0x00a7f5ac CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 393132
14 com.apple.music.apps.Logic 0x00cb7530 TaskCompleted() + 366032
15 com.apple.music.apps.Logic 0x009fe61b LgApplicationInit + 379
16 com.apple.garageband 0x00067621 0x1000 + 419361
17 com.apple.garageband 0x000667c2 0x1000 + 415682
18 com.apple.Foundation 0x9b887df1 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
19 com.apple.CoreFoundation 0x95311903 ___CFXNotificationPost_block_invoke_1 + 275
20 com.apple.CoreFoundation 0x952dc688 _CFXNotificationPost + 2776
21 com.apple.Foundation 0x9b872fde -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
22 com.apple.Foundation 0x9b888272 -[NSNotificationCenter postNotificationName:object:] + 55
23 com.apple.AppKit 0x98ab9df0 -[NSApplication finishLaunching] + 554
24 com.apple.AppKit 0x98ab97c0 -[NSApplication run] + 142
25 com.apple.AppKit 0x98d4aac5 NSApplicationMain + 1054
26 com.apple.garageband 0x0019cae0 0x1000 + 1686240
27 com.apple.garageband 0x0000311a 0x1000 + 8474 -
I tried to pen iwork but i keep getting this message... Any help please?
Dyld Error Message:
Library not loaded: @rpath/SFBlocks.framework/Versions/A/SFBlocks
Referenced from: /Applications/iWork '09/Keynote.app/Contents/MacOS/Keynote
Reason: image not foundMaybe this will help you, too.
-
I recently ran monolingual and removed all but the intel-64 bit architectures. Now my iphoto (along with Idvd, garage band, imovie) will not open. Here is the message that I get.
Process: iPhoto [3543]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-4750000~1
Code Type: X86 (Native)
Parent Process: launchd [109]
Date/Time: 2011-06-10 21:48:59.821 -0500
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -4164908 sec
Crashes Since Last Report: 8
Per-App Crashes Since Last Report: 11
Anonymous UUID: 45357CCD-011B-482E-A2EA-CF42096F1321
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13
Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.5
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST31000528ASQ, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x24300000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0901, 0x26400000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000Please let me know when you find a fix. I did the same thing and have tried every suggestion I can find online. The message I get is...
Process: iPhoto [4991]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier: com.apple.iPhoto
Version: ??? (???)
Build Info: iPhotoProject-6070000~1
Code Type: X86 (Native)
Parent Process: launchd [142]
Date/Time: 2011-06-13 23:39:38.485 +1200
OS Version: Mac OS X 10.6.7 (10J869)
Report Version: 6
Interval Since Last Report: -1643976 sec
Crashes Since Last Report: 35
Per-App Crashes Since Last Report: 12
Anonymous UUID: D4811036-EA8D-479D-8D9F-11E2FC8F6D4C
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: no suitable image found. Did find:
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
/Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <1C06ECD9-A2D7-BB10-AF50-0F2B598A7DEC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.36.9)
Bluetooth: Version 2.4.0f1, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 3.5 GB
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26100000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06610000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x06500000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0x06300000
I have reinstalled Mac OSX 10.6.3 and done the updates from there.
I have reinstalled ilife 11 from disk and done the updates.
I have deleted all the suggested files and then redone install and updates.
I have tried just reinstalling iphoto and doing updates.
Is there any way to get a replacement - /Library/Frameworks/iLifeSlideshow.framework/Versions/A/iLifeSlideshow
file with the right architecture? -
Has anyone seen this iTunes Match message before?
iTunes crashed during upload to iTunes match (one week and 3,500 tracks in to a 7,500 track upload) and on restarting it wants me to 'add this computer' as it's forgotten that the library is already in the process of uploading to iTunes Match.
On clicking 'add this computer' it analyses my iTunes library then gives the above error message.
Will selecting 'match this computer' mean that all the content I've matched and uploaded so far will be deleted and I'll have to start all over again with my 7,500 tracks uploading?
Any advice welcome...Yes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD -
Hey All, Has anyone seen the following error message
"Service 'Apple Mobile Device' failed to start, verify that you have sufficient privileges to start system services."
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
Process: iTunes [6564]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.3.1 (10.3.1)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [143]
Date/Time: 2011-06-26 09:12:25.888 -0400
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: 57AD9B95-8923-403C-BDB2-EBBBD4E1F09C
Interval Since Last Report: 40546 sec
Crashes Since Last Report: 6
Per-App Crashes Since Last Report: 5
Anonymous UUID: 0B83B69E-63F7-4197-908B-49A24783F09F
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x1000 - 0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 3 incoming serial ports
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2I have the same problem...
Process: iTunes [498]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: 10.3.1 (10.3.1)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [254]
Date/Time: 2011-06-27 14:23:04.822 -0400
OS Version: Mac OS X 10.7 (11A390)
Report Version: 8
Sleep/Wake UUID: AC114B5B-BBDE-47BE-A34A-73D0CBEC2D1D
Interval Since Last Report: 21605 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 3
Anonymous UUID: 7CA002EB-2F78-46A8-B8FC-917C420125C9
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
@executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: unsafe use of @executable_path in /Applications/iTunes.app/Contents/MacOS/iTunes with restricted binary
Binary Images:
0x1000 - 0xe50ff3 com.apple.iTunes (10.3.1 - 10.3.1) <DA5B3668-53FC-8550-A39C-06EB35AA692F> /Applications/iTunes.app/Contents/MacOS/iTunes
0x8fe00000 - 0x8fe3320b dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.5)
Bluetooth: Version 2.5.0b13, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHY2250BH, 250.06 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3 -
My iPages has frozen up whilst importing a Word file into iPages. I can no longer use this software. has anyone seen this before. Thanks, Ken
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love -
I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...
Try this article (disable firewall)
http://support.apple.com/kb/TS2799 -
Has anyone seen this behaviour of AccessHW In Port?
Yesterday I was trying to check the operation of a plug-in PCMCIA parallel port, specifically I wanted to know if there were any timing issues with this device on an XP machine, so I thought I would try the AccessHW In and Out functions in Labview. I installed an old copy of Labview 6.1 (It was 5:50PM and I wanted to do this fast!) and tried it.
Reading the memory location where the device's status port was supposed to be just returned zero. Strange, I thought, so I tried some other addresses in the I/O range. I got zero from every single one. I tried the same on my own laptop, which is also XP, and I was getting sensible numbers from addresses in I/O space.
Has anyone seen this behaviour? The machine has McAffee on-access protection running, which cannot be disabled (company IT policy), and I have a suspicion that this might be blocking accesses to low memory, is this possible?Sorry... my mind is not working well this morning You had mentionned that in your original post and the fact that it is a PCMCIA parallel port.
As for the address location, I have seen addresses in the 0x2000 region for add-on parallel ports (not PCMCIA).
I haven't used a PMCIA device with Win-XP. Does the address info for that port appear under properties when you look at the HW devices within the Control Panel's System. From what I can recall, you can change the PCMCIA serial port number within the HW device, so maybe the properties will list the address..
Have you checked this?
RayR.
Message Edited by JoeLabView on 07-02-2008 11:20 AM -
Pop-up window with an attempt to open a URL - has anyone seen this?
I was browsing a website for music lyrics when a suspicious pop-up appeared, along with a very small browser window (about an inch square on the screen). This has happened twice even though I have pop-ups blocked.
The pop-up had the Safari icon and looked like a standard mac window. The text contained the following:
<edited by host>
Antivirus 2009 will perform a quick and 100% free
scan of your computer for Viruses, Spyware and Adware.
Do you want to install Antivirus 2009 to scan your
computer for malware now? (Recommended)
There is a cancel and an OK button at the bottom.
The small browser window appears to be contacting the onlineprivatescan.com URL
I did a force-quit because I did not want to click either button.
I reset Safari, and ran the DNSChanger Removal Tool
from macupdate, but it didn't find anything. I have not loaded codecs from any websites and I had just completed the latest Apple updates for OSX, Quicktime and iTunes before this problem occured.
Has anyone seen this? Is this serious? I've never had any problems with Safari before this.Mac OS X 10.4 Tiger automatically checks your downloads for malicious software and content that could harm your system or collect information from your computer. You can read more about that here:
http://support.apple.com/kb/HT2340
If you feel you need added protection, read on:
SecureMac has introduced a free Trojan Detection Tool for Mac OS X. It's available here:
http://macscan.securemac.com/
The DNSChanger Removal Tool detects and removes spyware targeting Mac OS X. Called DNSChanger Trojan and also known as OSX.RSPlug.A Trojan Horse, the software attacks users attempting to play a fake video file.
Upon attempting to play the video, the victim receives the following message:
“Quicktime Player is unable to play movie file. Please click here to download new version of codec.”
Upon running the installer, the user's DNS records are modified, redirecting incoming internet traffic through the attacker's servers, where it can be hijacked and injected with malicious websites and pornographic advertisements. The trojan also installs a watchdog process that ensures the victim's DNS records stay modified on a minute-by-minute basis.
SecureMac's DNSChanger Removal Tool allows users to check to see if the trojan has been installed on their computer; if it has, the software helps to identify and remove the offending file. After a system reboot, the users' DNS records will be repaired.
There may be other ways of guarding against Trojans, viruses and general malware affecting the Mac. A white paper has recently been published on the subject by SubRosaSoft, available here:
http://www.macforensicslab.com/ProductsAndServices/index.php?mainpage=document_general_info&cPath=11&productsid=174
Also, beware of MacSweeper:
MacSweeper is malware that misleads users by exaggerating reports about spyware, adware or viruses on their computer. It is the first known "rogue" application for the Mac OS X operating system. The software was discovered by F-Secure, a Finland based computer security software company on January 17, 2008
http://en.wikipedia.org/wiki/MacSweeper
On June 23, 2008 this news reached Mac users:
http://www.theregister.co.uk/2008/06/23/mac_trojan/
More information on Mac security can be fund here:
http://macscan.securemac.com/
More on Trojans on the Mac here:
http://www.technewsworld.com/story/63574.html?welcome=1214487119
The latest news on the subject, from July 25, 2008, is:
Attack code that exploits flaws in the net's addressing system are starting to circulate online, say security experts.
The code could be a boon to phishing gangs who redirect web users to fake bank sites and steal login details.
In light of the news net firms are being urged to apply a fix for the loop-hole before attacks by hi-tech criminals become widespread.
Net security groups say there is anecdotal evidence that small scale attacks are already happening.
Further details here: http://news.bbc.co.uk/2/hi/technology/7525206.stm
You should also read what a major contributor called tacit has to say here:
http://tacit.livejournal.com/238112.html -
Opening a self serve yogurt shop where you use a scale to weight product the weight goes to ipad to cdalculate price. Has anyone seen this application or process? Please help?
I understand the inconvenience you are experiencing when working with Office 2013.
If you have any feedback about Office 2013 product, click the and submit to Microsoft.
Microsoft will decide how to fix the problem for all customers.
For the activation mechanism, it intends to protect customers of their rights and interests.
For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
http://technet.microsoft.com/en-us/library/cc178982.aspx
For the problem Office 2013 keep crashing, check the following link to check:
http://support.microsoft.com/kb/2813143/en-us
http://support.microsoft.com/kb/2758592/en-us
Thanks,
Tyor Wang
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no
help.
If you have any feedback on our support, please click
here -
Installing itunes; headaches.has anyone seen this??
Itunes and my iphone 3 and 4 have always been user friendly until this newest upgrade/software update. After uninstalling and trying to reinstalling right when its almost complete..gets to the obtaining publishing data, an error.." An error occurred during the installation of assembly Microsoft.VC80.CRT,type="win32 version="8.050727.4053".publicKeyToken=1fc8b5b9a1e18e3b".processorArchitecture= "amd64"". Please refer to Help and Support for more information. HRESULT:0x800736FD.
HAS ANYONE SEEN THIS BEFORE? HELP!Hello,
As I promised, we checked in AVAYA center with AVAYA engineer how E60 works with AVAYA SIP server. We found that there is a problem to begin usage of IP telephone service. E60 always sad that craeted profile "Not registered". And don't like to act with WLAN network although WEB-browser works fine in the same time with the same AP-7 and WLAN settings.
AVAYA took a timeout for identify what's a problem with E60. Some terms on Nokia setting don't correspond to AVAYA terms.
I hope that it will take not a lot of time for AVAYA.
I'll let you know about the results.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8 -
Has anyone seen this issue before?
Possibly. Do you have other devices and will they connect?
One possible thing that it could be is that the USB port on your iPad has gone bad. It happened to mine. Couldn't sync, could barely charge (it said 'not charging' even when plugged into the wall)
I'd take it to the apple store, see if they can replicate it, and if they can, then they can diagnose it. Just back it up before you go, in case they do exchange it. -
Itunes doesn't display graphics, only text, has anyone seen this?
Just loaded iTunes 10.5 on Windows...only TEXT is displayed...has anyone seen this?
I have this exact problem, and it occurs on every device I own: iMac, Macbook, iPad, Win 7. The explanation for the issue is that the stylesheet isn't coming over (.CSS).
Because it occurs on every device in my house, I'm assuming there's something in my wireless router configuration that's causing it. I haven't found the issue yet, but I'm digging through my modem configuration to see.
go to either http://192.168.0.1 or http://192.168.1.1
That's your modem's IP address. If you can figure out what's in the configuration that's causing it, please post back.
Maybe you are looking for
-
Cannot View/Edit phones in CUE 8.6.1
I have installed several systems with CUE 7.1 and was able to view and edit the phones and extensions via the CUE Web GUI. I am building a new system which is running CUE 8.6.1. When I login to the Web GUI, I do not see the phones or extensions at al
-
How to get the measurement data from IMU using SBRIO through SPI?
Hi All, I'am trying to use the SPI communication protocol to realize the bridge between my Vectornav VN100 IMU chip and the LABView through the SBRIO 9602. I amended the SPI sample code from NI website based on my own device and configuration. It com
-
When I open the website as http://oldc.in then there posting are going out of boxes so please can anyone tell me about fixing this problem? This problem is going only with mozilla firefox.
-
How do you supress the leading Zeros from a numeric value
For example: v_tmp = '0005'. where v_tmp is of type NUMC(6),i can't change the data type as i get this value from a database table. how do i convert v_tmp to '5'? Thanks in advance.
-
How do I make more years categories in the library?
My iphoto library is divided up by year, but it shows only 2005 to 2008. There is another category that says "early photos." I have photos as early as 1999. Is it possible to divide those up into their specific year instead of grouping them all as ea