Has anyone seen this error when trying to Save As...

In Acrobat X, after revising hundreds of links, I go to Save As... If I choose PDF... I get this warning instead of saving... "This document could not be saved. There was a problem reading this document (14)."  I have not tried all of the Save As options but the Save As - Reduced Size PDF... produces another error without saving.
Has anyone else seen this? 
I have figured out a work around - but it's still annoying....
(Here's the workaround BTW)
First of all the SAVE works so you can save the work you've done.
In Bridge or Explorer make a duplicate of the file. Rename the file to what you want. Go in an make further revisions particular to that copy, Save and close. Now you have your Saved As...file.

I should add that the pdf in question has a lot of interdocument links/buttons and a lot of links going to another pdf document. Both files are kept in the same folder.
I'll try to answer any other clarifying questions.

Similar Messages

  • Has anyone gotten this error when trying to connect to base station

    I am getting a -6753 error eveytime I try to connect to the base station via the admin utility. I've tried both soft and hard re-starts but to no avail. Any suggestions? Thanks

    Hi jpnscr,
    got a couple of these while setting up two Airport Extreme base stations. I got around this by a hard reset of each unit, and (ii) by using an Ethernet cable connection. For (ii), there was a really interesting difference between a brand-new simultaneous dualband AEBS which did require the Ethernet cable in one of the LAN ports, and an older Gigabit AEBS which could only be setup with the Ethernet cable in the WAN port. As long as I had the cable in the wrong port(s), I got the -6753 error.

  • Has anyone seen this error?

    Hi,
    I got this error when I openned DS SP03 today
    http://img87.imageshack.us/img87/5266/errordsni8.jpg
    Thanks in advance
    Cherrs,
    Reynod

    Reynod-
    A couple of things you could try:
    1. Close the view which has the error - in your case it is the Composite Applications view. Close any other views which have an error. Then to re-initialise your CAF perspective by going to Window -> Reset Perspective. You have to be in the CAF perspective when you do the restore.
    2. If (1) does not work maybe you should re-install NWDS.
    Cheers-
    Atul

  • Has anyone seen this error opening MS Office applications?

    Yesterday I went to open MS Word 2008 on my Macbook Pro (now running Lion OS) and received an unusual error which I have not seen before. Word had been opening and working fine on previous days since my lion install so I do not think it is compatibility issue, but the description of the error has me more worried about potential hacking via Wifi.... maybe I'm paranoid but I'd appreciate some advice.
    " Microsoft Office 2008 for Mac HSE cannot start because Microsoft Office is already in Use
    An office program is being used by Rodolfo. Your installation exceeds the number of installations permitted by the license agreement. Click More Information to go online to learn about Microsoft Office licensing. "
    I have only one installation, so my first question is, does anyone know what causes this error and my second... does anyone know who or how the name Rodolfo may have been displayed in this error message?
    Strangely, although I had tried restarting Word several times in the same location I was receiving the same error, but when I went home that evening I opened it fine. Today I have returned to the same cafe to use wifi and Word has opened without errors.
    Please forgive my ignorance but I would love some advice from someone who can shed light on this?

    Please post Office related questions on the  Microsoft Mac forums, as Apple Communities only provide support for Apple products: http://www.officeformac.com/productforums

  • Has anyone seen this error "window.cpp line 11518"

    I have this error in my application and I am not printing or using an event structure. Apparently this error code has been found with printing front panels or using an event structure. I am using a case structure and all other cases are working properly. Once I get to this case labview displays this error and crashes. I deleted the case and the case structure and rebuilt it but I am still seeing the same problem. In this case there are two subvi's when the second subvi is executed this error is present when the second subvi is in highlighted execution the error is not present. If anyone has any suggestions please let me know. Thanks.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor

    After troubleshooting this problem more, I found that in the second subvi under vi properties, show front panel and close after if originally closed were not checked. Once checking both of these options the error did not occur anymore. Also this error was not present when the subvi was open in the background.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor

  • Has anyone seen this error message: "Disc burner or software not found"?

    Two weeks ago I successfully burnt a CD of Word files. Yesterday I put in a blank DVD and got a formatting error message. I didn't think too much of it (thought I had bad discs).
    Tonight I tried to burn a CD out of iTunes. I got this error message: "Disc burner or software not found"
    I suspect this is not good.
    Can anyone help? Details on the DVD drive below.
    Thanks a lot.
    Will D
    MATSHITA DVD-R UJ-857:
    Firmware Revision: HBE4
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    MB 1.83, 2G RAM   Mac OS X (10.4.8)  

    Thanks for the post.
    No moving or renaming files, except for I deleted a file related to Adobe Acrobat to remove a toolbar thing. But nothing other than that.
    Are there specific files I should be looking out for?
    Thanks again.

  • Has anyone seen this error message before?

    Hi
    We have a server running Windows 2008 R2 which we have built as a demo environment for P6 R8.3 EPPM. It was upgraded to R8.3 SP1 late last year, and has just been sitting idling in between being used for product demonstrations.
    Recently I decided to let Windows Update apply a bunch of patches to the OS and the SQL Server instance running on the box - today when a colleague and I logged in to EPPM we kept getting a popup window every 10 seconds or so in front of the main portlet windows, headed "message from webpage", with the message
    Logged messages:
    message='unable to initialize AdfAgent' level=SEVERE error=message;'AdfIE8Agent' is undefined description:'AdfIE8Agent' is undefined number:-2146823279 name:TypeError at hh:mm:ss
    This happens if we access the application using IE; it does not happen if we use Chrome - can anyone offer any suggestions what might be causing it? There is nothing related to AdfAgent or AdfIE8Agent in the Oracle KB at the moment

    Sachin
    On the server where P6 + WebLogic are installed, it's IE 11
    On my client PC, it's IE 11 as well
    I am pretty sure that that the problem has only started since IE11 appeared, but that may be wishful thinking. I have tried clearing everything from the browser cache, with no difference in behaviour. I have also tried setting the emulation mode to IE8 but that didn't seem to make a difference either.
    I have restarted the P6 web app several times, and cannot see any errors in the WebAccessLog.html except for a occasional minor one related to Struts - certainly nothing that seems related to ADF directly.
    Whatever the issue is, Chrome is not affected, and I have now installed it on the server as well where it is working fine.

  • Has anyone experienced this error when syncing your iphone..."iphone could not be synced b/c the connection the iphone was lost"????

    i have been trying to sync my iphone and keep getting the following error: iphone could not be synced as the connection to the iphone has been lost"....suggestions please.

    Try one or more of the following troubleshooting steps:
    Connect the phone directly to a USB port on the computer, not to a USB hub.
    Disconnect all other USB devices except the iPhone, keyboard and mouse.
    If it's a desktop or tower computer use a port on the back of the computer rather than the front.

  • Exception setting connection dictionary: null has anyone seen this error

    I am migrating webobjects off of solaris and onto linux servers. The console starts up fine, but when I try to start any of the app instances, i get the following error
    Exception setting connection dictionary: null

    It seems you have multiple tnsnames.ora files. You can set TNS_ADMIN to point to the oracleDB home and it should be ok.

  • Has anyone seen this error during installation ? (HELP!!)

    The error is the following:
    adicom30.ins(267):OS_error while getting the version of
    Attempting to install to Windows 2000 workstation. Any help is greatly appriciated.
    Thanks,
    Lee

    Try installing as Administrator. This may be due to privileges.

  • Has anyone seen this error? Final Cut X

    The managed object model version used to open the persistent store is incompatible with the one that was used to create the persistent store.

    You can link to feedback from the Apple FCP page.
    Which version is this and what are your computer specs? You might try making a new user and seeing if that works.

  • Has anyone seen this error message before? If so, any suggestions?

    Happens whenever the user tries to add a signature to a PDF.

    Hi,
    I don't recognize the toolbar on the left side of the screen. Is there a third-party plug-in installed. If so, close Acrobat, move the the plug-in out of the plug_ins folder located at \Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins (don't delete, just move it somewhere else), restart Acrobat and try to sign. If the crash doesn't occur then it's being caused by the non-Adobe plug-in.
    Steve

  • Installation problems, has anyone seen this error ?

    Re: Installation Problem WAS 6.40 ABAP SR 1
    Please help,
    Thanks

    Hi Mickey,
    Have you updated MS DLL's before proceeding with installation ? (for that you need to run program R3DLLINS.exe usually located in the SAPINST\NT\I386\NTPATCH folder)
    Regards,
    Mike
    Message was edited by: Mike Puzankov

  • Error when trying to save a file

    I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
    I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format. 
    I also tried opening another file copy and pasting under a different name and it doesn't help.
    Please Help.
    Bruce

    Hi,
    Please try the following methods:
    Using Administrative Template files and the Office Customization Tool to disable the restriction
    Use a trusted location, or create an exempt location
    Quote from:
    http://support.microsoft.com/kb/922849/en-us
    Regards,
    George Zhao
    TechNet Community Support

  • I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this???

    I am trying to download through Itunes the news iOS 4.3.3 software to my Ipod touch 4th G. it starts downloading just fine, but when it gets about 200mg into the 600 mg file, it comes back with stopped (err= -3259) has anyone seen this??? I have tried downloading this at different times of the day, and have also tried it on different internet service providers ... still recieve same error msg...

    Try this article (disable firewall)
    http://support.apple.com/kb/TS2799

Maybe you are looking for

  • Multiple Threads Problem

    Hi, I am new to Java Threading and the current program that I am working is having problems. The program basically paints lines and dots or onto a JPanel which displays an image. There exists a thread here to suspend and resume the drawing at the use

  • FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger

    Hi Guys, Can someone help me to find the root cause of my follwoing issue Issue My Sales Order was giving following error when trying to open the form 'FRM-40735: WHEN-NEW-RECORD-INSTANCE trigger ' Bounced the instance the issue was resolved. Again t

  • ALG_RSA_SHA_PKCS1  with  cyberflex 64k

    Hello, I've tested with success ALG_RSA_PKCS1 , on gemalto cyberflex 32K and even 64k here is my crypt fonction : private void encryptRSA(APDU apdu)           byte a[] = apdu.getBuffer();           short byteRead = (short) (apdu.setIncomingAndReceive

  • Some text is printing as boxes

    I am trying to print a document that has text box comments in it.  When I print a hard copy to our Konica Minolta C652 printer, some of the text boxes print out with the individual characters as boxes.  The document is 5 pages and we are printing 2-s

  • Simple Dense_rank Question

    Hi, Where am I going wrong here.. SELECT AAFRM_ID, AGENCY_AGY_CODE, DENSE RANK() OVER( PARTITION BY AGENCY_AGY_CODE ORDER BY AAFRM_ID ASC NULLS LAST) DENSE_RANK FROM agency_application_form WHERE AGENCY_AGY_CODE IN (6412,7911);and I am getting this e