Has anyone seen this problem with IAC iviews?

No Service Name Specified
Your request did not contain a service name. Please provide a service
name as part of the URL.
Example URL:
http://.../scripts/wgate/CreateSO/!
or...
Session Already Terminated
There is currently no session running that might accept this request.
This situation usually occurs if your session has been closed by the
Internet Transaction Server and you tried to navigate to a previously
requested page by selecting BACK in your browser. To proceed you must
first restart the session as described above.
© 1996-2003, SAP AG

Jeremy,
Did you get any resolution to this problem.
Thanks,
Sanjoy.

Similar Messages

Has anyone seen this problem? :(

Hey Everyone,
I picked the new white 30 gb ipod video up yesterday. I opened it set it up and transfered all my vids and music. Now my problem is the clickwheel. It scrolls about 200 (literally songs at a time and is not acurate with the amount of contacct i have with it. I tried resetting, and now restoring. What shouold I do? Has anyone seen this problem yet?
Anything helps,
J.Martin

Sounds like a strange HW problem. Before you return it, I'd try a Restore, resync, and check it. If it STILL does thast, you need to check with Apple Support.

Has anyone had this problem with VPN iPad vpn connection could not validate the server certificate

Has anyone had this problem with IPad 3 after upgrade to IOS 7,
trying to to connect VPN , but I get this messag, "could not validate the server certificate".
I am trying to connect to Oracle VPN.

Has anyone found a solution for this yet? I am still getting the could not validate server certificate error. I have tried importing the entire certificate chain as well as importing each individual cert in the chain. My certificate works perfectly with the cisco vpn on my pc.
This is my first experience owning an apple product, and I am very disappointed with the customer support that I have received. I tried calling the help line and no one would even attempt to answer my question. I was then told that the Mac "geniuses" wouldn't know either and that I may be able to find an answer on the message boards. So I am reaching out to the community...Has anyone been able to figure out how to resolve this issue or even the specific cause? Any help is appreciated.

Anyone seen this problem with Excel 2003?

We're developing a Microsoft Excel-based app. The help system uses HTML Help (.chm) format, and works just fine with Excel 2007 and 2010. However, since a lot of potential users out there are still using older versions, we've been asked to adapt the app for Excel 2002 and 2003.
The help system works, more or less, with Excel 2002, but when we try it with Excel 2003 the tri-pane is missing. The default topic appears but the left-hand pane containing the navigation system (TOC, Index and Search) is missing. Consequently, users can't move away from the default topic. Has anyone come across this problem before, and do you know how to fix it?

I cannot help you with this one other than to say I haven't seen any other such reports. That may suggest it is worth checking for some small difference you haven't identified yet.
Of course it could also mean there aren't many people with that workflow.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HT1222 10.6.3 everytime I try to upgrade to this ver. it stops at the end because it can't find the folder containing the information package "itunes.msi" I have did a search for msi with no luck in finding it. has anyone have this problem with a soluti

eerytime I try to upgrade to this ver. it stops at the end because it cant find the folder containing the missing "itunes.msi" has anyone else experienced this and is there a solution. help. Using XP service pack 3

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

WEIRD! Has Anyone had this problem with the keyboard ribbon cable? HLP! PLS

Replacing a DVD drive and using ifixit to reassemble the unit; the PB 1.67 Ghz wont turn on--nothing.
After 3 days of troubleshooting I finally found that pressing the keyboard ribbon cable to the logic board very firmly while pressing the power button starts it.
Nothing else works. When I release the pressure the PB works fine after start however the power switch doesnt work again (for an emergency manual shutdown or to boot the PB again). Tape doesnt work.
This connection is only a small friction fit connector. Ive cleaned the area, compressed air cleaned and close inspection shows no visible problems I can see.
Has anybody experienced this and how do I fix it? I cant open the PB every time I want to boot it!
Steve

Hi, Steve. I don't have an answer for your faulty connection, but as for workarounds, there is seldom a need to shut a Powerbook down and then boot it up using the power button. I recommend that you stop shutting down as a matter of habit, and instead just put the Powerbook to sleep (using the command in the Apple menu) when you aren't going to use it for a while.
I could easily count on my fingers and toes the total number of times my Powerbook has been shut down since I bought it four years and ten months ago. It runs 24/7/365 except when I'm working on something inside it. For all other purposes, a software Sleep or Restart command suffices, and I don't need the power button for those. You should be able to reduce your need for that button just as drastically.

Has anyone seen this BUG with Time Warp and Dissolve?

I'm doing some real basic slow-mo clips, transitioning with various dissolve wipes. I've come across a problem that is extreemly frustrating! I'm wondering if anyone has insight on a fix or if Adobe does service packs or fixes that I might be able to install.
If you put two clips adjacent to each other on a timeline, apply time warp, set percentage to say 30% of realtime, then apply a dissolve between the clips, clip B, the outclip will play in reverse for a period equal to about 1/3 of the duration of the clip.
This is true scrubbing through the timeline and even rendering.
VERY ANNOYING!
I'm going to call support tomorrow, but that's not going to help me get my project finished any sooner since this is a critical element in this composition. I've tried the time remapping method, but the frame-blend is no match for the pixel motion of time warp.

Steve,
I think your post #11 was being sarcastic, but you left a little wiggle room for it not to be. With the sarcastic interpretation, I must add my thoughts:
Here is the link to the Adobe bug report form
. It is important that users who discover bugs with reproducible steps file them - otherwise they don't stand a chance of ever getting fixed. Steven Gotz's advice was sound in this regard.
As to the discussion of workarounds - since this is a User-to-User forum, the best that we as a community can do is help each other out with workarounds, since none of us here have the power to actually fix anything.
The important thing to glean from SG's post is the definite need to file a bug report.

Has anyone seen this problem before?

Hi all
For some reason, every time I update my templates, it breaks
all the javascript on the child pages. I have to go in to each
child page individually and re-do the javascript again and then it
works fine. It's all different types - SwapImage,
OpenBrowserWindows, etc. Kind of ruins the ease of a template -
anyone ever see this before? I don't know a whole lot about JS, so
I can't tell what is breaking in the updates. Just thought I'd
throw it out here and see if anyone else had a similar problem.
Thanks, Q

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

Has anyone had this problem with their 9930?

when i turn on the mobile network on my 9930 it begins to power cycle nonstop ive tried everything i mean everything possible with no luck. Any help?

Hello Scottnew
Let's get this issue fixed! I know I would be lost without access to the mobile network. Did this start after an application was downloaded? Please power down the device and remove and reinsert the battery.
If the issue persists I would recommend a hard reset. Here's how to accomplish this: http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=44185
Please let me know if the issue persists after the hard reset.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Has anyone seen this bug with embedded images?

If I embed a wide image in this post and you click on it to zoom it up, is it centered in the safari window or center WRT the monitor? Basically can you see all of it?

It looks like this, here. It's done that for a long time, unless Safari extensions are switched off, regardless of there being any installed.

HT6208 has anyone had this problem with installing the IOS 7.1.1 update - Enter Passcode? I never created one

Whats the enter Passcode all about when i've never created one?+

You need to enter the four digit passcode that you enter when you start your iPad or awaken it from sleep after an Autolock. If you do not remember the passcode you will have to restore the device. Here's a link to what to do when you forgot your passcode.
http://support.apple.com/kb/HT1212

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

Problems with Apple ProRes 4444 and alpha channels in Motion 4 after upgrade to Snow Leopard. Has anyone seen this?

We've just now upgraded from Leopard to Snow Leopard and are having a problem with Apple ProRes 4444 and alpha channels in Motion 4. A clip with an alpha which keyed perfectly before the upgrade, now will not key. If I convert the clip to the Animation codec, it keys perfectly. If I export the Motion project as a ProRes 4444 self contained movie, it will key when brought into FCP 7 but if I import the project into FCP 7, it will show the key in the viewer but not the canvas. Has anyone seen this or have any suggestions on how to correct this? Is it a bug?
Thanks,

Motion 4.0.3
It just doesn't seem to recognize the alpha at all.

Has anyone seen this display problem?

I even changed my video card and still had the same issue? has anyone seen this or know how to fix this issue?
I tried to show a screen capture but didnt have any luck but the issue is alot of my icons are showing pink lines on them and when in certain application and safari the pictures are showing up all pixelated with pink and green pixels instead of displaying the correct image? is it possible the AGP slot is bad? i just upgraded to 10.5.8 hoping to correct the problem but no luck. Also this is a Power PC 1.8 ghz.
Thank You

I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

Has anyone seen this MacBook Pro 15" 2008 problem before?

Hi. My MacBook Pro has developed a fault whereby a horizontal line appears on the screen, the mac freezes then a host of vertical lines gradually appear on the screen until it is obscured. Something similar happened in May last year and Apple charged me over £300 to repair it, replacing the 'mother board'.
I have so far taken it into the Apple shop twice in the last week (a two hour round trip). Both times they have opened it, cleaned it and declared it fixed. This time it lasted about an hour before happening again, although this time at least I've been able to restart it.
Has anyone seen this before, or have any advice about how best to proceed?
I have put a video of the symptoms here:
20120915 135612 - YouTube
Thanks for reading. This is my first post so apologies if I've rambled a bit!
Steve
MacBook Pro 15", late 2008.

I wasn't notified that you asked me a question or that there was a new post on this topic. I should have been, that bugs me.
Anyhow... Mr. Ah
The problem that some people, mostly with a certain video card, were having was when they updated from 10.5.4 to 10.5.5. For many of them the problem went away when they went through the hassle of reverting back to 10.5.4.
Did you +just recently+ update to 10.5.5? If you have, then their fix is for you too, going back to 10.5.4. If you have had 10.5.5 installed for a while now, and this just started happening, chances are good that it is your video card, or perhaps something affecting it like dust and dirt like DP says above.
If you have another start up drive, firewire or internal, and you had enough space on it you might consider installing a previous OS 10.5 on there and start up from it. If the problem went away you would know it's 10.5.5. Perhaps even if you started up from your OS disc the problem might go away and again you'd know it was 10.5.5. Apple was made aware of the problem on some machines and said they were going to come out with a fix, but I don't think they ever did.
Post back and say what the situation is, especially if you just recently updated to 10.5.5.
And post back with what kind of G5 you have, look in the "About this Mac" window.
Your card may be dying, but on the other hand it might be as easy as pulling it out, blowing it out, and putting the card back in again.

Has anyone seen this problem with IAC iviews?

Similar Messages

Maybe you are looking for