Has anyone set up DHL successfully as a Shipping Option?

I have a DHL account number but where do I get the other values from ie Key , Password and ID/Meter Number? Do you have a url for a site using DHL?

I have contacted DHL in Australia and Germany. They state clearly that they have no connection with BC of any kind. They also stated they were asking their legal department to make sure BC stops claiming that DHL is integrated with BC.
As a side note they have an extensive API that they said "may" be adapted to work with DHL but this would require extensive programming and as far as they were aware had not been undertaken by anyone.

Similar Messages

Has anyone been able to successfully integrate CHARM and BW?

Has anyone been able to successfully integrate CHARM and BW?
We are trying to pilot it but cannot find a way of allowing us to control the sequence of importing transports - it's fine for small single transports but we can't see how to control the order of multiple transports or how to re-transport specific indiviual transports.
Thanks

You can but you have to install Rosetta from one of your (snow)leopard) disks. It's not a good idea if you don't know what you are doing. But it does work. There are some instructions online if you really want to give it a go. FCS2 is not native intel and Lion is not supporting PPC anymore. So while you can it is questionable if you should. Probably time to up or cross grade.
Pi

Has anyone been able to successfully use more than 8 cores with Logic?

I've posted this before and was recommended to phrase the question like this, has anyone been able to successfully use more than 8 cores with Logic?
If so or if not please specify what version of logic you have, what computer since only the new Mac Pro's have 16 virtual cores, and any other information or reference saying how to or how its not possible. This seems to be a question many users need to find out before upgrading to a new mac. Thanks!

DrumStudio wrote:
I've posted this before and was recommended to phrase the question like this, has anyone been able to successfully use more than 8 cores with Logic?
If so or if not please specify what version of logic you have, what computer since only the new Mac Pro's have 16 virtual cores, and any other information or reference saying how to or how its not possible. This seems to be a question many users need to find out before upgrading to a new mac. Thanks!
No,
But I've been able to record a quartet using only 4 musicians.

Has anyone set up their roku xs player on the imac successfully? If so how to please?

just bought a new imac 27 inch want to set up my roku player to run through it. Has anyone done this and is it easy?
thanks

The iMac can be used as an external display. To hook the iMac 27-Inch up to a HDMI device, such as the Roku XS, you could use a HDMI to Mini-Display Port converter. For instance you could use the Kanex HD, or Atlona AT-DP300. One you hook the roku up to the Imac using one of these converters, you can press command + fn + F2 to toggle between the iMac and the Roku.
It's just like like switching your TV between your VCR and your cable box. It's important to note, this means you can not say browser the web on your iMac & at the same time watch the roku.

Has anyone Been Able to Successfully Access the WVC54GC Cam via DynDNS.

I have been working on getting this camera for over a week now trying to get it to be accessable on the internet via DynDNS service with no luck. I have also tried other Dynamic DNS service providers like NO-IP and had no luck as well.
I already have an account with DynDNS and do not want to use the Linksys Sololink service and pay another fee. I called Linksys support and they notified me that this camera is only accessable on the internet via the Sololink Service.
Is this true has anyone figured out a way to use this with another service provider.
Pls. let me know. I bought 8 of these camera strickly to be able to monitor my place of business via the internet. If can not get this darn camera to work with DynDNS I will return them all.
Thanks.

HI...
You can try the following steps.
The camera will definitely work with DynDNS. Follow the following steps.
Access the camera setup page. Click on the tab that says "Options".
The Alternate Port should be set to enable and specify the port number that you wish to use. Default Port number is 1024. Apply the changes that we have made.
Now on the router setup page forward the same port number for the camera IP address.
Now when you use the DynDNS domain name use it as http://DynDNSDomainname:1024 and this will lead you to the camera over the Web.
In case you are using eight different camera........use a different port number and also a different IP address for each of the camera and specify the same on the router.
You can also refer to the following link to setup DynDNS with the linksys camera.
Click here to get to the link.

JSTL Has anyone got this working successfully

Has anyone gotten JSTL or any third party tags to work successfully if so how? I will award points for good answers

Basically you can not work with jstl within sap portal. However, if you are willing to do some work, here is what i did:
At first you have to understand the problem, so here a brief snippet of the generated java source
             try {
                          int _jspx_eval_hbj_page_2 = _jspx_th_hbj_page_2.doStartTag();
                          if (_jspx_eval_hbj_page_2 == Tag.EVAL_BODY_INCLUDE)
                            throw new JspTagException("Since tag handler class com.sapportals.htmlb.taglib.PageTag implements BodyTag, it can't return Tag.EVAL_BODY_INCLUDE");
                           if (_jspx_eval_hbj_page_2 != Tag.SKIP_BODY) {
                             try {
                               if (_jspx_eval_hbj_page_2 != Tag.EVAL_BODY_INCLUDE) {
                                 out = pageContext.pushBody();
                                 _jspx_th_hbj_page_2.setBodyContent((BodyContent) out);
snip some parts
                         } finally {
                              if (_jspx_eval_hbj_page_2 != Tag.EVAL_BODY_INCLUDE)
                                   out = pageContext.popBody();
                    if (_jspx_th_hbj_page_2.doEndTag() == Tag.SKIP_PAGE)
                         return;
               } finally {
                 _jspx_th_hbj_page_2.getBodyContent().close();
                 _jspx_th_hbj_page_2.release();
The generated code is bad and not foolproof:
1. sap wrongly assumes that EVERY tag implements BodyTag. This is just not the case
2. If, for whatever reasons, doStart() throws an exception, the finally block will call getBodyContent().close(), and throw an NullPointerException...
Basically i had to write wrappers of my own, that implemented BodyTag and replace the used classes in the tld-file to point my wrapper classes.
Because of the deficiencies in doStart() your wrapper must not ever return null upon calls to getBodyContent(), even if it has not been initialized.
Of course, this wont get you anywhere near reading your resource bundles within a tag, but thats another story.

Has anyone set up a Paypal account that is shared with another non-BC website or eBay shop

I am needing to set up Paypal on a 2nd site for 2 separate clients. Both new sites are on the BC platform using the standard Paypal options in eCommerce thus requiring me to set in the website preferences in Paypal the return url address.
My issue is that one of these clients has another website taking Paypal payments and the other client has an eBay shop paying through Paypal.
I am trying to understand how I can set up the BC sites payment gateway in view of the fact that we need to set the return URL address in the Payal preferences which of course is no good for the other sites sharing this same Paypal account.
Has anyone done anything similar and if so can you tell me how I should go about it preferebly without having to create an additional Paypal account.
BC support could not help out and advised contacting Paypal who were quick to tell me it is all in the email acocunt I use until I expalined we use the API setting a return URL. I am now searching for a practical solution.
Many thanks.

In the paid partner form there was a reference to setting up the PayPal std gateway saying that the PayPal Customer Id must not only be the primary email on your Paypal accunt but it went further to state that this email accunt must be yru admin account email address of your website... This is the first time I have ever heard this. Is this really so.
In reference to my original question... does the email address we enter into PayPal Customer Id have to really be the primary or can you use one of the alternate email addesses becasue advice form PayPpal is just to provide one of the emails set up in Paypal.
UPDATE 4 July:
After spending several hours on the Paypal customer service merry-go-round over 2 days I have been finally advised that becasue BC requires the Paypal preferences to set the return URL back to the BC website we can't share the Paypal account across multiple websites. Obviously paypal have not heard of the concept of profiles where you could set preferences against the 8 individual email accounts you are allowed to set up and use for otehr payment processing.
A word for the wise before you rush in to set up an additional Paypal business account - there are some rules you must follow:
Your Paypal accounts must be in different names (real names not the email address)
You can't use the same bank account or credit card across any 2 Paypal accounts
You can't share email addresses between Paypal accounts
Other than that - it's simple...
The above is the situation with Paypal standard business accounts - If anyone has better information please share
Message was edited by: Greg.Tomkins

Has anyone found that MS Word stops showing paste options after upgrading to latest Firefox version?

I recently upgraded to Firefox 26. I have a PC using Windows XP Professional SP3. I also use Microsoft Word 2007. Recently, when I copy something and paste it into a Word document, I no longer see the little button that allows me to choose paste options ("Match destination formatting", etc). Note that I have checked the box in options which says "Show paste options button".
I can't be absolutely sure of this, but I suspect the Firefox upgrade and the sudden disappearance of my paste options button are related. (This may sound unlikely, but I read on another forum that someone had the same problem after installing Skype, so maybe it's not impossible).
Has anyone else had this problem, or does anyone know of solution (whether or not related to Firefox)?
Thanks!

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Has anyone in the community successfully OR NOT implemented Simpana backup?

We purchased Dell Comm Vault wth Simpana MML. We have been fighting with it trying to get it installed for a couple of months. We finally got a Simpana engineer on site and we are actually able to run sbttest successfully, but when we try to use the libobk.so to make an RMAN backup to CV disk, it fails.
We have spent hours and hours on this (probably in the weeks now) wasted trying to get it working. We are 'supposed' to move our production to our new OEL/RAC environment in @ 3 weeks, BUT if we don't have backups running we miss that date.
Anyone out ther using Simpana? If so, did you have problems getting it working and WHAT was the magic bullet to make it do so.
Thanks
Edited by: hndba on Jan 14, 2011 7:15 AM
Edited by: hndba on Jan 14, 2011 11:49 AM

This is likely not going to come as a shock to you but
1. Dell has so far not been purchased by Oracle
2. These forums are not an appropriate place to deal with non-Oracle specific questions
3. One phone call or letter from your corporate attorney to Dell will get the problem fixed in 24 hours (and if it doesn't tell them to take it back and purchase something else).

CUP 5.3: Has anyone set-up user deletion process that works through CUA?

Hello,
I wonder if anyone has managed to set-up a user account deletion process that works through CUA?
We can't get CUP to delete the system assignment in CUA before the back-end account is deleted.
Any kind of advice or information regarding this problem would be appreciated.
Br,
Stefan Ericsson
+358-50-4867527

Jes,
We have 2 approvers for each role. We defined in the Role Approver Stage that it be routed to the alternate approver should the main approver not respond in the next 3 days (via Forward to Alternate Approver). Bear in mind, once it is escalated to the alternate approver, the main approver will not be able to view/approve the request anymore. If the alternate approver does not approve/reject the request, the request will be left as is.
In our case, we have used the functionality in CUP to pre-define the alternate approver rather than in your case, you would want to only escalate it as and when your Security Admin decides to. I believe if your Security Admin staff has admin rights in CUP, they are able to forward it to another approver via the Administrator tab. Else you can create a new stage to foward to your admin staff if it is not action upon.

Has anyone set up a G3 powermac with 8.6 to Sympatico?

I am trying to switch over from a 56K modem dialup to the Bell Sympatico High Speed. I have a Speedstream router and have successfully set up my PC computer. However, I am running into brick walls when it comes to my Mac. The software they sent me doesn't work with OS 8.6 and I was told to go to the Apple site to download verson 1.1 however, when going to the site, it gives me the site is not found error message. The people at Sympatico are useless when it comes to Mac.
kathwill

Turn off the power to your SpeedStream.
Open the Preference Folder in your System Folder and remove the TCP/IP preference file to some place outside your system folder and keep it as a backup. Quit and restart your Mac.
Be sure the ethernet cable is securely attached to your SpeedStream and to your Mac’s ethernet port.
Open the TCP/IP control panel
Go to the Edit menu/UserMode and click “advanced”. Close the UserMode and save if it asks.
Go to the File menu/Configurations/
Choose “Default,” duplicate it and rename the duplicate whatever you want
Click “Make Active”
You should now have a TCP/IP window.
Click on “Options” and click on “make active”
At the top of the TCP/IP window:
Connect via: ethernet
Configure: Using DHCP server
Leave the DHCP Client ID field blank for now (Ask Sympatico later if they have a number for you to put in there; that is something they determine.)
Leave the Implicit Search Path and the Ending Domain Name fields blank
In the name server address field, Sympatico should have given you a set of numbers in the form xxx.xxx.xxx.xxx to put in here.
Likewise, Sympatico should give you a name in the form of something like “sympatico.net” or so to put in the Additional Search domains field. However, I don’t believe, although I’m not sure, that it is not absolutely essential to have these two filled in, as your DSL feed itself should be getting you to these places (maybe!)
Save this configuration.
Shutdown your Mac.
Turn on your SpeedStream and wait until the lights stop blinking. This should take about a minute roughly, more or less. Notice how many lights and what the names of the lights are, and report that back if this all doesn’t work.
Restart your Mac again.
Open up your browser. I think you should be connected at this juncture.
Good luck!
As to the upgrading to OS 9.x, I don’t believe that is absolutely necessary, as I believe that you should be able to connect with OS 8.6. However, it is unlikely that upgrading to OS 9.1 would cause you any problems. I’ve found almost nothing which runs on OS 8.6 that won’t also run on OS 9.1. However, there is a number of neat utilities and programs out there which do require OS 9.1 and won’t run on OS 8.6. Do not get OS 9.0 or 9.0.x retail install disks if you can avoid it, as OS 9.1 is the version you would want to use on your Mac. Given how the Mac world is going these days with the Intel Macs now out, the old MacOS 9.x and below and all the old non-OS X Mac programs are no longer going to run on the new Macs. Therefore, it behooves one to get one's “classic” Mac house in order for the long haul, if one wants to keep running one’s old Macs “forever.” Since a PowerMac G3 (I assume you have one of the beige Macs with the SCSI port, serial port, etc.?), you have one of the great Macs to keep for a long time. Thus, getting OS 9.1 wouldn’t be a terrible idea, if you otherwise like the Mac, have peripherals for it which work, etc.

Has anyone set up gmail using apple configurator?

Does anyone know where I can find a step by step guide for email setup using configurator?

For a school that uses iPads for learning I would not set up a email for them on the iPads at all. They need to learn so have them set up an account thru gmail lets say and dedicate it for the class's. Anything school related they would use this email.
What you would need to do is have them provide the user/password in writing and also have on thier that they allow an administrator to access the account at any time if needed. Also make sure to put in thier that this email is strictly to be used for school related, class related events. It is not a personal email, not to be used for any personal activity.
This last part should be looked over by the school officials and lawyers but something of that sort will keep you out of trouble.
When you use devices such as this in education, the more you let them do the better.
The issue you will have is blocking stuff on the server side, websites ect..

Has anyone set up their mail through Roadrunner?

For some reason it's not syncing my email so I have to do it manually. I've added all the incoming and outgoing information and it gives me the error message of "Cannot Connect Using SSL". Does anyone know what this means? I also tried to set up my gmail account which is already preprogrammed in there and it gives me the same message. Can anyone help?

If you tried GMail and that doesnt work, then there is something else wrong. Are you connecting via WiFi or EDGE? Try EDGE (there is no telling how your WiFI connection is configure), and try resetting the phone, deleting the mail account and recreating it. Start with GMail. That is known to work. If you cant get that one to work, Roadrunner will be a waste of your time - you may need to do a restore at that point.

Has anyone set up a mac mini using an iMac

I am trying to set up a mac mini with my iMac. My end goal is to share files between the two and use my iMac 27" screen for the iMac and the mac mini.

AirDrop will let you share files with very little configuration on your part. As long as the two machines are on the same network, you're just about ready.
As for sharing a display, the 27" model used to support Display input via DisplayPort, which used to be a matter of buying a cable and connecting one to the other. I'm not sure if that feature has come over now that they've switched from DisplayPort to Thunderbolt.
You could also use Screen Sharing to view the mini's desktop from the iMac...again, as long as the two computers are on the same network (and you've configured Screen Sharing on the mini) it should work. Good luck!

Has anyone set up Mediasense yet?

Hi,
I have a customer with mainly 7940 IP phones (no Built in Bridge) registered to CUCM 8.6. They recently moved to CUBE gateways on ISR 2921 routers for PSTN access.
They now need a recording solution so I am looking at options.
The 7940 phones do not have the Built in Bridge feature and so cannot fork media to a recording server.
One option is SPAN based recording but this will be tricky in their environment as they have three sites linked by 100Mbps Ethernet circuits and I have found that RSPAN chews through the available bandwidth.
The other option seems to be Network Based Recording using the Mediasense product. However not many people seem to know much about it yet.
I have read the SRND and have a few questions.
If I run it on an SRE module could this sit in the 2921 router that is acting as the CUBE?
If I did run it on the SRE is there a mechanism to automatically move the recordings to another storage location?
Is Medianet useful by itself or does it really need a third party application (Calabrio?) to work with it?
As well as these specific questions I would be interested in hearing about people's experience with the product - how easy was it to set up, did it prove to be a good solution etc.

Hi,
Installed on UCS, and although it is some time ago when I played with it, I can remember that it was working immediately (not all that common in Cisco world )
But as I already said, it is a platform, you need 3rd party applications to make it usefull for the end user.
On the Cisco web site you can download a java application to test it.
I don't have experience with Calabrio, but I know that more recording companies provide mediasense support.
Thanks,
Jan

Has anyone set up DHL successfully as a Shipping Option?

Similar Messages

Maybe you are looking for