Has anyone setup Helix to have a direct link to iTunesU?

I am a newby so I may not be asking the correct questions here.
I have a Helix Media Library server.
HML has the ability to be my intranet streaming server for iTuneU content.
In the Helix setup their is a place holder for a direct link to your iTunesU account.. They give an example of http://phobos.apple.com/institution
Does anyone know the correct format? Would the URL be the same for links to content on my HML server and users to view content?
I have a URL but it is for the iTunesU administrative page. Is their a page on within the administrative page that shows this URL?

Are you able to try taking them back to the store that you bought them from and ask them to activate them properly ? If not then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Similar Messages

Has anyone setup sky email on there ipad?

Has anyone setup sky email on there ipad?

Try following along with Sky's guide -> Configure IMAP with iPhone

Has anyone used or researched using Peavey AmpKit LiNK and it's Applications in GB for the iPad?

Has anyone used or resarched using Peavey AmpKit LiNK Hi-Fidelity Guitar Interface for Ampkit and Ampkit+ Applications on the ipad and with GarageBand. It seems that AmpKit unit gets better reviews than the iRig as an interface...
A couple of questions... Does it work with GB (iPad and GB 11)... There is a recording function on the Ampkit Application... would this be compataible with GB for the ipad and also GB11 on the imac...
Also if you have any experinces / thoughts on the usabilitiy of the AmpKit unit with the ipad that would be great...

I have both the Ampkit link and a iRig. The AmpKit link is much better it sounds about the same as the iRig but much less noise. It works great with Garageband. I don't use the Ampkit software for recording. I have used AmpKit+ and Amplitube Fender on the ipad plugged into a PA and as a modeler for recording in Garageband (Mac).

How to I get my Muse site to have a "Direct Link" to a section on my website.

How to I get my Muse site to have a "Direct Link" to a section on my website. For example, if I am under the busniesscatayst I can direct some to an exact page in my site through an email or Facebook post: http://biteonfishing.businesscatalyst.com/buy-now.html However, I can not perform the function when I am not including the Business Catalyst www.BiteOnFishing.com I want to make so I can send people to the link using www.BiteOnFishing.com/buy-now.html. Any advice is much appreciated.

You need to point your domain name DNS to the Business Catalyst server and then set up the domain name in the Business Catalyst site admin.
Adding a domain name to your site and taking site live

Has anyone setup BIEE with OLAP 10g using value-based dimension hierarchies

I just wanted to know if it is possible to setup BIEE with 10g using multple dimensions containing multiple value-based hierarchies?
I know this involves using the OLAP Cube View Generator to create an sql view of the cube data.
I have been able to get this to work with nine dimensions all containing a single value-based hierarchy bar one which had four value-based hierarchies. But as soon as i have multiple hierarchies in multiple dimensions it seems to go haywire and i cannot get the sql view to return correct data.
I thought i would post on the BI side to see if anyone has been successful in creating a BIEE setup like this?

The simple answer to your question,
how robust is the 11g materialised views with multiple value-based hierarchies...?is that materialized views are not supported on top of value-based hierarchies in 11g. The reason is that it is not possible to write a reasonable SQL statement that aggregates a fact over a value-based hierarchy. Such a SQL statement is necessary if we want to create a rewritable MV on top of the cube.
But I suspect this is not what you are really asking. If you are trying to set up OBIEE on top of the cube in 10g using the view generator, then you will probably want to use the "ET VIEWS" that are generated automatically in 11g. These are generated whether or not you enable materialized views on top of your cube. I am not aware of any issues with the generated value-based hierarchy view support in 11g. Members may be shared between value hierarchies and you will not need to generate or modify limit maps.

Has anyone got Maps to work with directions in the UK?

If I enter US addresses, it works, but I can not get the routing function to work at all for anywhere in the UK, even used Yo Sushi as seen on the posters and I can find it but the directions function did not work, even from the next street.
Anyone had any success with directions on maps in the UK? And if so, can you give me the example that worked.

I am having the same problem and checked out the Apple Discussions for a solution.
I too am meticulous with my addresses.
Seeing no solution I went back to testing.
I have tried:
From Shrewsbury
To Telford
The result was a trip in the US taking 14 hours.
Then I tried:
From Shrewsbury UK
To Telford UK
This worked.
When on the "Get Directions" screen there is a "Globe" icon by the "Space" icon. Pressing this brings up "English (US)". Press again and you get "English (UK).
Any ideas?
When I use the "Contacts" to get the Start and End fields the iPhone is bringing up the correct address but with "United States" at the end of the address.
Again any ideas?
In my Address book I never use the "Country" field as all my contacts are in the UK. I wonder if this is the problem and the iPhone is defaulting to US in the absence of no "Country"?
Help!

Has anyone tried to update using the direct download file of 4.2.1?

My internet connection isn't the fastest at home so I downloaded the update file at my office using the following link :
http://appldnld.apple.com/iPad/061-9857.20101122.VGthy/iPad1,14.2.1_8C148Restore.ipsw
Any tips on how to proceed with doing the update using this file? I know you have to Option-Click the Update or Restore button, and then browse to the update file, but I was wondering if there is anything else I should do first.

Thanks to both of you - I was running 4.2 on my iPad, and the download link at daw.apple.com for the 4.2.1 GM was taken down after it shipped - so I was bummed...
Found your post with the direct download link - boom! Happy camper...
Aaron

Has anyone setup a Ubuntu Web server running Ebox behind a AirportExtreme?

I'm setting up a Ubuntu Server, as a web server on a LAN that has access to the Internet via an AirportExtreme (cable modem on the WAN port). The Server is running Ebox (a web based maintenance tool) which can be accessed via the WAN on HTTPS port 443.
Are there any setup considerations on the Airport I need to consider to allow access from the Internet?
Thanks

You will most likely need to configure the 802.11n AirPort Extreme Base Station (AEBSn) for port mapping to allow inbound traffic from the Internet to access your web server. Note: You will need a Windows PC or Mac to run the AirPort Utility to configure the AEBSn.

Has Anyone Setup a Linksys E4200 to Operate From a i Mac OS 10.6.7?

New E4200, Set for PPPoE, DSLExtreme Service.

I set mine as well. I did with the Cisco phone support, they have been super helpful!!!

Has anyone setup a Canon PIXMA MP500 Photo All-in-One with Airport Extreme

Hi,
This printer is fairly well rated but I don't know if its compatible with Airport Extreme and 10.4, and if so how difficult was the set up.
Also, if you can suggest a multifunction printer that works well with Airport Extreme and 10.4, I'd appreciate it.
Thanks,
MK

First, Only printing works for multifunctions connected to Airport Extreme/Express.
See this:
http://www.ifelix.co.uk/tech/1300.html
And read through the separate Discussions forum here for Airport Extreme/Express-connected printers.

Has anyone else experienced web pages in Safari being unexpectedly re-directed to knock off MMO ad sites like 'League of Angels'?

As recently as one month ago, I started experiencing a phenomenon where web-pages I was on would randomly be redirected to ad sites for knock-off MMO's. For example, if I had left a tab open to an article on Cracked.com, but was reading a different tab, the Cracked article would re-direct itself to another website. This usually was a minor annoyance, in that I would just have to go back a page in my browser, but this evening I was watching an episode on HBO Go and in the middle of streaming the video the web page abruptly changed to League of Angels. Has anyone else experienced these strange re-directs, or know what is causing them?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Has anyone multiplexed 5 or more cameras?

Has anyone setup a system using a lot of cameras? I have an application that will require either 5 or 9 cameras. Speed is not a critical factor (the part will not be moving) but I'd like the acquire rate to be on the order of at least a second or two for all 9.
I believe I could use three 1409 cards and synchronize them. Would I have to synchronize all 9 cameras together as well as the cards or if I have 3 hooked up to each, can I just synchronize the 3 cameras hooked to each card and simultaneouly grab from all 3 cards?
Does anyone know of a standalone multiplexer that could take all 9 cameras and output 1 video stream that would go into a 1409 or 1407 or other NI card? I heard of the video multiplexers that will t
ake multiple cameras for recording to a vcr, but I'm not sure one of those would work.
Thanks

I totally agree - using firewire cameras will allow you to hang them all of the same card (only one card required, so you won't need to look at multiplexing anything), will be cheaper, and will allow up to 63 devices on the FireWire bus. As acquisition speed isn't an issue, FireWire would be perfect for your application. This option negates the need for framegrabber cards, although you will need to purchase (not very expensive) the IEEE1394 (FireWire) Vision Toolkit to extend MAX to see your devices, and perform IMAQ functions (more info on the toolkit is here).
You can find more information on IEEE1394 and other vision techniques in my book: Image Acquisition and Processing with LabVIEW.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Has anyone implemented ChaRM in a 4-tier or 5-tier landscape?

Iu2019ve setup ChaRM with a 3-tier landscape DV1-QA1-PRD and everything works as advertised. I used the transport route, DV1/120 -c- /QA1/ (clients 149/150) -QA1 -d- PRD/150. Where -c- is a consolidation route and -d- is a delivery route.
Now I need to do a proof of concept to see if I can get CHaRM to work with our current landscape. We have a dual development path and need to make sure we sync our DEV and QA systems. The lanscape Iu2019m trying to use is DV1-QA1-PRD-DV2. The transport route Iu2019m trying is DV1/120 -c- /QA1/ (clients 149/150) -QA1 -c- PRD/150 -d- DV2/120. Iu2019ve tried various combinations and the only way I can get it to work is DV1/120 -c- /QA1/ (clients 149/150) -QA1 -d- PRD/150 -d- DV2/120. When I release and import into PRD it goes to both PRD and DV2. While this gets the transport to my support dev box I need to have another step in the workflow. What Iu2019m looking for is the workflow to act like dev-qa-qa-prd.
Has anyone setup a 4-tier or 5-tier landscape with release and import steps between each system? If so what did you use for your transport route and were they other config changes needed after the route?
Thanks for your time.
Jeff

Hi Jeff
Have a look at these
http://help.sap.com/saphelp_smehp1/helpdata/en/a3/0aae435a1342e8a56998d83a797161/content.htm
/people/dolores.correa/blog/2009/08/27/change-request-management-scenario-retrofit-functionality
Hope it helps
Santosh

Has anyone seen this before,? some import operations were not performed , could not copy the file to requested location

some import operations were not performed , could not copy the file to requested location , has anyone seen this or have a fix?

cormacc57361247 wrote:
has anyone seen this or have a fix?
Oh, I bet that if you'd done a site search, you'd have got answers to both of those questions...

Has anyone setup Helix to have a direct link to iTunesU?

Similar Messages

Maybe you are looking for