Has anyone solved or worked around the After Effects CC red flash frame glitch?

I can't find any mention on any forums of the After Effects CC red flash frame glitch later than Feb. 2014. I just installed 12.2 (which was my first CC version) on my macpro and started getting the red flash frames randomly, but with increasing frequency, in my projects. I have never had this problem before on any previous computer or version for AE. The forums I've read have referenced ProRes source footage, outputs to ProRes, and lens blur. My project uses all of these things.
If there is a universally accepted solution/work around, I haven't seen it definitively. Do I not use ProRes source footage? Do I not render to ProRes 4444? Do I not use the lens blur effect? Do I give up and go back to CS6?

Hi Keith,
I have the "same" issue with the red frames in AFX CC
I have seen them first, as I resized a prores4444 HD to a smaller format and saw the redframes in the preview window.
Setup in AFX: I created a comp from the HD Prores4444 footage and put this comp in a comp with resolution of 960x540.
The output format was again prores4444.
I shuttled through the clips in the small comp and I saw the red frames too.
When I switched to the HD comp at the same position everything was fine.
I "solved" the problem by flushing the cache, twice. Because after the first purge I was only able to render the first clip. The second one had the red frame problematic again.
Maybe It has something to do with hardware accelerated layers.
I'm using a MacPro running OSX 10.8.5 with a Nvidia GTX680.
Cheers
Michael

Similar Messages

HT1473 Has anyone found a way around the artwork bug for iTunes 11 in Windows?

This thing has been ******* me off for 2 years and I can't contact Apple directly to rage at them. Hopefully someone there sees this. Has anyone found a way around the bug?

I assume you are using transitions. This is not a bug - it is how iMovie handles transitions.
There are two settings for transition overlap - full and half. If you are using photos only, you may get the results you want by setting transition overlap to half.
For full details, see iMovie Help here on Transition Overlap.
http://help.apple.com/imovie/#mov3a6201ac

Has anyone done any work with the "Form" Email Feature in 2008?

Has anyone done any work with the "Form" Email Feature in 2008?
2006.7
Oracle 9i
Websphere 5.11
IE6 & IE7
I have been testing the version 2008.2 and noticed the "Form" link in the email templates, has anyone used this or know what its for?
It seems like a useful feature, but I can not find any documentation on its use.
Thank you
Daniel

Hi Daniel,
The HTML widget we have incorporated into the application is an open source tool. It's name is FCKeditor. Here is the URL for the documentation site: http://docs.fckeditor.net/
- Ed

Has anyone tried this work-around?

This suggestion for returning Front Row to Lion has been around for a couple of months. Has anyone actually had any luck with it?
http://osxdaily.com/2011/07/21/front-row-for-mac-os-x-lion/

Front Row Fix for Lion - Yes I just tried it and it works - Very Simple! Yea!

Has anyone solved battery problem on the S5IS

So far duracell coppertop NMH 1600mah promaster and nothing seems to last operating camera with external flash and no LCD monitor on to get any life,does anyone make a battery pack or grip for more capacity.

Hi Crackers,
I think you're on the right track, in using Nickel-Metal Hydride (NiMH) batteries, but we recommend using NiMH batteries with a 2500 milliamp hour capacity. More is better, still.
I hope this is helpful.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

TS1702 Has anyone had any issues with the app scramble with friends after updating to iOS 6. The touch screen is not responding properly when selecting the tiles but worked fine before the update

Has anyone had an issue with the app scramble with friends after upgrading to iOS 6. Tapping the screen will not select the tiles and hold them.

Yes I am having the same problem. I can't find any info about it and nothing seems to help. I am just posting this in hope that if it's a wider problem, there will be a quick solution.

Has anyone solved the "garbled characters" issue i...

When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
Zürich appears as: Zã¼rich
München appears as: Mã¼nchen
Liège appears as: Liã"ge
I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
Has anyone solved this extremely annoying issue?
Thx

I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
Finally, after playing with it some more I found a simple solution which should work for everyone:
***** SOLUTION *****
1. Enable internet access in Nokia Maps application (set it to When Needed).
2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
4. Put the card back in the phone if you extracted it and start Nokia Maps.
5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
6. Now codepage should be correct and all names become readable.
This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
Message Edited by ankor85 on 09-Jan-2008 09:02 PM

Has anyone solved the privilege error message in iTunes?

Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.

Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847

My apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

my apple id was disabled, and i reset the password but it still says its disabled. Has anyone solved this problem?

I solved that particular problem for myself (although I am running iTunes 11 under Snow Leopard on an iMac) by deselecting one of my Users Admin. privs. You see, I had two users w/admin privs & iTunes now plays nicely when there is only one admin.
Otherwise, I would keep getting stuck in an "infinite loop" of resetting passwords over & over and still iTunes was a mess - albeit on an intermittent basis which was absolutely driving me nuts!
I also think that firing up Safari and signing into my account @ apple first seems to help; providing that an apple cookie gets placed in my machine before I go to the iTunes store and enjoy surfing around there.
Anyways, good luck~

I too am getting the tritone sound every day at 2 17 pm with no message or notification on my 4s, has anyone solved this problem yet since 09? thanks

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

I have been getting the tritone sound at 2 :17 pm every day for a while now with no message or notification to back it up , I think this has been a long term problem since 2009 according to your past discussions , so has anyone solved this problem yet? 1phone 4s system ios 6.1.3. Driving me crazy diving for the phone and seeing a blank screen , feel like someone some where is saying 'got ya' and laughing their butt off every time.

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

Dock has moved lower with Mountain Lion. This truncates the indicator light below the dock. Has anyone solved this problem?

scottkb2000 wrote:
I'm confused. I just got an email from Apple Support Community (updates) and I see that a "baltwo" response is marked "This solved my question" (no offense directed towards baltwo). The question just seems to be more defined, not resolved. This is an Apple OS problem (seemingly) and needs to be directed towards a technical representative, not the community. I would ask that if anyone knows how to push this issue towards Apple, that is where the solution lies.
File a bug report with Apple via feedback. Do note that this goes through marketing and sales. No telling when it'll get to engineering. Alternatively, if you want to report this issue directly to Apple's engineering, bypassing marketing and sales, send a bug report or an enhancement request via its Bug Reporter system. To do this, register as an Apple Developer—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. You'll get a response and a follow-up number; thus, starting a dialog with engineering and you'll be able to track its status.

Has anyone else lost their scroll bars after downloading the newest version of IOS?

Has anyone else lost their scroll bars after downloading the newest version of IOS?

What does the iPhone/iPad OS have to do with Mavericks?
Mavericks does remove the scroll bars as they are not needed, but you can set them to show always in the General System Prefs.

Has anyone had trouble with dropped calls after downloading the IOS 7

has anyone had trouble with dropped calls after downloading the IOS 7

I downloaded mountain lion and then iPhoto '11 in order to tap into iCloud capabilities with all of my devices. (My Mac was outdated in regards to operating platform to do this). After installing iPhoto 11, I had to repair and rebuild my library of photos. However, after doing this, all of my albums were jumbled and, while I can see the image thumbnail, when I click on the thumbnail, and error that looks like a black triangle and gray exclamation pops up as opposed to the larger hi def image I want to view.

Has anyone else had problems with the macbook pro after the OS X Yosemite upgrade?

has anyone else had problems with the macbook pro running slow after the OS X Yosemite upgrade?

Same for me! my iphone 4s gets extremely hot whit IOS 7.0.2.

Has anyone got iFS working in Tomcat ?

iFS 1.1.9
We have a urgent need to get iFS running in a Servlet 2.2 container and OC4J does not support iFS yet. I know this is not supported but has anyone got iFS working in Tomcat ? If so, pls do me a BIG favour by letting me have your config files, such as
- server.xml
- <tomcat home>\conf\web.xml
- web.xml for the tomcat context)
- wrapper.properties (if you are using tomcat as an NT service)
- tomcat-apache.conf (or equivalent)
- <oracle home>/apache/apache/conf/httd.conf
- A listing of relevant environment variables (by doing a "set>env.lis" or similar)
- and any other files you might think is relevant
Thanks a million in advance.
null

iFS 1.1.9 / Oracle 8.1.7 / Tomcat 4.0.1 / Windows 2000
After several hours of fiddling around with the configuration
files, I finally got the iFS up and running on my test machine.
Briefly here's what I did:
1) create application directories
<tomcat_home>/ifs/files/WEB-INF/classes
<tomcat_home>/ifs/files/WEB-INF/lib
2) Add the following to <tomcat_home>/conf/server.xml:
<Context path="/ifs/files" docBase="ifs/files"
debug="0" reloadable="true">

<Environment name="ORACLE_HOME" type="java.lang.String"
value="oracle_home"/>
<Environment name="ORACLE_SID" type="java.lang.String"
value="sid"/>
<Environment name="LD_LIBRARY_PATH" type="java.lang.String"
value="oracle_home/lib:oracle_home/ctx/lib"/>
<Environment name="NLS_LANG" type="java.lang.String"
value=".UTF8"/>
</Context>
Please replace oracle_home with your installation directory and
fill in your SID as well.
3) create <tomcat_home>/<tomcat_home>/ifs/files/WEB-INF/web.xml
with the following definitions:
<servlet>
<servlet-name>oracle-jsp</servlet-name>
<servlet-class>oracle.jsp.JspServlet</servlet-class>
<init-param>
<param-name>logVerbosityLevel</param-name>
<param-value>WARNING</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>oracle-ifs-servlet</servlet-name>
<servlet-
class>oracle.ifs.protocols.dav.impl.IfsDavServlet</servlet-class>
<init-param>
<param-name>classpath</param-name>

<param-value>
tomcat_home/webapps/ifs/files/WEB-INF/lib/ojsp.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/webui.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/adk.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/http.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/repos.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/email.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/release.jar;
tomcat_home/webapps/ifs/files/WEB-INF/lib/utils.jar;
tomcat_home/webapps/ifs/files/WEB-
INF/lib/settings.jar;
tomcat_home/webapps/ifs/files/WEB-INF/classes;
tomcat_home/lib/xmlparserv2.jar;
tomcat_home/lib/classes12.jar;
tomcat_home/common/lib/servlet.jar;
</param-value>
</init-param>
<init-param>
<param-name>ifs.dav.servicepassword</param-name>
<param-value>manager</param-value>
</init-param>
<init-param>
<param-name>encode_to_java</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>page_provider</param-name>
<param-
value>oracle.ifs.protocols.dav.impl.jsp.IfsJspResourceProvider</p
aram-value>
</init-param>
<init-param>
<param-name>page_repository_root</param-name>
<param-value>ifs_home/ifsjsps</param-value>
</init-param>
<init-param>
<param-name>unsafe_reload</param-name>
<param-value>false</param-value>
</init-param>
<init-param>
<param-name>developer_mode</param-name>
<param-value>true</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>oracle-ifs-servlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>

<servlet-mapping>
<servlet-name>oracle-jsp</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
tomcat_home and ifs_home must be replaced with your installation
directories.
4) Copy the iFS and Oracle JARs to the locations specified in
web.xml
You may choose either the applications lib directory or the more
general tomcat_home/lib for that purpose.
One hint on libraries: Tomcat will ignore ZIP files, you have to
use JAR. I renamed Oracle's classes12.zip to classes12.jar for
that reason.
5) Create settings.jar
This was the most tricky part. I packed everything under
ifs_home/settings into the file settings.zip, renamed this to
settings.jar and moved it to the WEB-INF/lib directory. Seems a
bit of a kludge to me, anyone with a better solution is welcome.
6) Start tomcat
7) try http://yourtomcathost:8080/ifs/files/index.html
You should see the ifs login screen then.
One word about the application environment. In this
configuration every user class has to go into
<tomcat_home>/ifs/files/WEB-INF/classes, the
ifs_home/user_classes is of no use here. And don't try to set
the classpath within catalina.bat, tomcat will completely ignore
this setting.
Finally, I know that this environment is not supported but as
long as the iFS servlet meets the standards, every standard
compliant servlet engine should do the job.
Good luck

Has anyone solved or worked around the After Effects CC red flash frame glitch?

Similar Messages

Maybe you are looking for