Has anyone solved the "Error Code 0x80020022"

"The disc can’t be burned because communication between the computer and the disc drive failed (error code 0x80020022)."
I have researched this at length as I have just been getting this message, but I don't see how to resolve it.
Has it ever been resolved and if so, I would really like to know how.
Cheers

Michael,
An update on the ongoing superdrive error:
At the time I responded to your post, I was burning DVD+Rs because my superdrive didn't like -Rs very much and would error out on them. Yesterday, to test my theory on Disk Warrior, I bought some DVD-Rs and burned about 3 in a row successfully before I got the 0x80020022 error again. I ran Disk Warrior again and have been burning the -Rs consistenty (I have a lot of junk to archive off my HD.) But I thought that the type of media might be important to the conversation because the superdrive appears to like one type of DVD blank over another.
Some key points:
1) You said you're using a Mac Mini as your bootup disk. I am using a MacBookPro. This may be significant.
2) Because the error reappears routinely, this is by no means a complete fix. It needs to be repeated when the error reappears. However, in lieu of a more permanent solution, I'll take one that appears to work, even temporarily, until Apple or somebody out there can tell us how to fix this more permanently.
3) Because it appears to be fixed after running Disk Warrior, I am going to conclude that it is a software error, one of the operating system not communicating with the superdrive, and has little or nothing to do with the drive or the media, as I've read on other forums regarding this error. Of course, if your drive really has gone bad, who's to say that it won't prompt the same error, if it is an all-purpose error. I had my superdrive replaced last year, so I'm pretty sure it's not the drive.
Jim

Similar Messages

TS1368 has anyone had the error code 11556?

has anyone had the error code 11556 when logging onto the itunes store from itunes?

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Has anyone solved the "error -36" issue?

I am having enormous problems trying to copy data. A lot of the time I get "error -36".
I have spent a lot of time "cleaning" my directories by using the "dot_clean" solution.
All my external HDs are formatted MAC OS journaled (even my SD cards!).
And yet I still get the error.
I am unable to make copis of my data which is now getting dan gerous if anything happens to my MAC.
I am using a MAC PRO 2011 model, iOS 10.7.5
Can anyone help?

-36 or 'Disk cannot be read from or written to' error syncing iPod in iTunes
I-O error -36 « fuzzybrain|daisychain|blogdrain
Mac- Copying files larger than 2 GB to iDisk may cause Finder to stop responding or display "error -36" alert
OS X v10.5, v10.6- About named streams on SMB-mounted NAS, Mac OS X, and Windows servers; "-36" or "-50" alerts may appear

Has anyone received an error code of -3212 when trying to access the Itunes Store?

Has anyone received an error code of -3212 when trying to access the Itunes Store?

Just in case, let's try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

RasClient:dialed a connection named "VPN Connection Name " which has failed. The error code returned on failure is 789 on windows 8.1

Hello,
i am trying to connect to my corporation VPN Server " ISA 2006" using windows 8.1 client built in VPN, but its returned the following error:
Event ID 20227: dialed a connection named "VPN connection Name" which has failed. The error code returned on failure is 789.
VPN connection is working fine with windows XP and windows 7 with no issue , this error is only appear when try to connect to using windows 8 client machine.
this error is shows only on windows 8.1 client , same procedures used to enroll the certificate from internal CA " IPsec Type" is followed .
below are the ISA server specifications:
VPN Server : ISA 2006.
windows Server version 2003.
appreciate your quick help and reply .
Thanks

Thanks for your reply.
i would like to add another point for this case, that when we are trying to enroll a certificate from internal CA web enrollment directly using windows 8 " internet explorer 11" , its install a certificate without Digital
Signature and non-repudiation in key usage property, then when try to connect , its will give the above error 789 ..
when try to enroll a certificate into windows 7 " internet explorer 10" and then export and import this certificate into windows 8.1 machine "with the name of
windows 8.1 machine" into windows 8.1 machine, the VPN is working normally and without issue.
The properties of the Certificate are difference between windows 7 machine and windows 8 machine is key usage missing the Digital Signature and non-repudiation properties when enroll
from windows 8.1 " internet explorer 11", this is in fact because of
we don't have an option for key usage " both" when subment a certificate on web enrollment page from windows 8 machine ,, the only option available is exchange "
no signature and both option available "
i believe that there is something wrong when using windows 8.1 internet explorer 11 so its gave a certificate with wrong key usage property .
appreciate your quick help in this .
thanks

Who can solve the error code 403 on hp5522 ? help please

who can solve the error code 403 on hp5522 ? help please

Hello fredovolley,
Welcome to the HP Support Forums!
I see that you are experiencing an error 403 with the Photosmart 5520 series. I would like to offer the steps I have given before, check them out here: Re: Trouble scanning using Photosmart 6520
Even though it states it is for a 6520, the steps are all the same. I hope this help, cheers!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Has anyone solved the privilege error message in iTunes?

Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.

Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847

Has anyone solved the "garbled characters" issue i...

When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
Zürich appears as: Zã¼rich
München appears as: Mã¼nchen
Liège appears as: Liã"ge
I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
Has anyone solved this extremely annoying issue?
Thx

I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
Finally, after playing with it some more I found a simple solution which should work for everyone:
***** SOLUTION *****
1. Enable internet access in Nokia Maps application (set it to When Needed).
2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
4. Put the card back in the phone if you extracted it and start Nokia Maps.
5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
6. Now codepage should be correct and all names become readable.
This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
Message Edited by ankor85 on 09-Jan-2008 09:02 PM

Has anyone solved the iPod touch and Comcast email problem?

The reason I got a touch is to check email when traveling. As of a few weeks ago, I could no longer do this. The comcast.net page now requires Flash and directs me to the install page (which I cannot download to the touch). I asked about this at the Apple Store and the touch doesn't have/cannot have Flash.
Has anyone figured out how to get past the Flash page to just sign in and get email? I am going around with Comcast about this -- they continue to mix up the iPhone and the touch. I will post if I get a solution from them. In the meantime, can anyone help?

If you do NOT have the January Software Update, you must use the Webmail for Comcast. from Safari, type in http://mobilebeta.comcast.net works as advertised.
If you have purchase the January Software update:
Click 'Mail' Application
Click 'Other'
POP Information
'Name' is whatever name you want to call the account
'Address' is you email address
'Description' Whatever you want to call the account
Incoming Mail Server
Host Name = mail.comcast.net
User Name = [Your email address]
Password = [Your password] THIS IS CASE SENSITIVE
Outgoing Mail Server (SMTP)
Host Name: smtp.comcast.net
User Name = [Your email address]
Password = [Your password] THIS IS CASE SENSITIVE
It is really easy: just followed comcast for Outlook link
http://www.comcast.net/help/faq/index.jsp?faq=EmailOutlook17742
Looks a lot nicer than in the web.
If you make any errors or need to change anything, go to home, then settings, then Mail

How to solve the Error code (12/4186)

224733.pgapp01!BRIDGE.2864.1.0: GP_CAT:1069: WARN: Could not index FML32 buffer in postrecv
224733.pgapp01!BRIDGE.2864.1.0: LIBTUX_CAT:6031: ERROR: Unable to pre-process buffer before tranmission. Error code(12/4186)
how to solve it?
Thanks.
:)

You should contact BEA customer support about this problem. It is possible
for FML32 buffer indexing to fail if the buffer is not actually an FML32
buffer, if the buffer is not aligned on a 4-byte boundary, or if there is
not enough space in the buffer to store an index. However, none of these
cases should apply to a buffer received in the BRIDGE process.
<YuanSheng Jiang> wrote in message news:[email protected]..
224733.pgapp01!BRIDGE.2864.1.0: GP_CAT:1069: WARN: Could not index FML32buffer in postrecv
224733.pgapp01!BRIDGE.2864.1.0: LIBTUX_CAT:6031: ERROR: Unable topre-process buffer before tranmission. Error code(12/4186)
>
how to solve it?
Thanks.

TS1286 Hello All, I am using a PC and have an iphone - has anyone gotten the error message when sync'g itunes Ox800000A?

Hello All,
I have lost the ability to connect to itunes to update software and apps etc., My PC is giving me an error message of Ox800000A - apple says it may be a USB port problem. Has anyone else received this error problem and if so did you fix it and how?
The USB ports on my PC are working fine? Thanks in advance.

Hi MarcusAH,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221?viewlocale=fr_fr#0xE800000a
About unknown error 0xE800000a
When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
Windows XP
Disconnect all iOS devices from your computer, and quit iTunes.
Open My Computer from the Start menu.
Choose Tools > Folder Options in the file browser window then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer, noting that the drive letter can vary depending on which drive letter Windows starts from:
C:\Documents and Settings\All Users\Application Data\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Windows Vista or Windows 7
Disconnect all iOS devices from your computer, and quit iTunes.
Open Computer from the Start menu.
Choose Organize > Folder and search options. In the file browser window, then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer:
C:\ProgramData\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Hope this helps,
Mario

How do I solve the error code -19946, Microsoft Outlook for Mac 2011

I'm getting an error: error code -19946
Error
Could not synchronize record: <Message Name> to Exchange server: <Exchange Server Name>
Details
ChangeKey is required for this operation.
Error code
-19946
when using Microsoft Outlook for Mac 2011. When looking up the error, Microsoft has a solution for windows users, but not for mac users. http://support.microsoft.com/kb/2556352
Any ideas? Solutions? Help!

As Office is not an Apple product, I strongly recommend asking in the Microsoft Office:Mac forums here:
Office for Mac
Everyone there is a Mac user AND an Office user, something you can't say about Apple's forums. You will get the fastest help there and I think you will find the contributors more than helpful.

Has anyone solved the car integration problem with iOS8?

iOS8 broke my car radio's ability to control my iPhone to play music. I use USB, but many people in this community also suffered this over Bluetooth.
Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
Has anyone figured out a permanent fix?
Does Apple acknowledge this bug?

Afraid start up is still rough. Even more button pressing required to access. Some apps still reluctant to open. Either slow or simply won't open.
THanks for your comments.

Has anyone solved the problem of sending Pages docs to Windows machines?

I am trying to create a business newsletter that can be emailed to anyone who wants it. I'm working with OS X 10.4.10 and Pages. My business partner, who works on a PC, can't read a Pages doc, so I converted it to a pdf, and Windows won't read that, either. So I exported it as a Word doc, and he can read that, except the colors aren't true. What kind of a program creates files that pdf readers can't view? And why did I spend my money on Pages if it can't create a file everyone can read?

Strange, I've been emailing PDFs with no problems at all.
I am the only MAC-MAN in the office so all my work goes to 100% PC "market".
A wild guess - are you using Apple Mail app? If so, make sure the "Send Windows friendly attachments" is selected.
Do not encrypt the PDFs.
Do not include EPS graphics (just in case...)
JPEGs rather than TIFFs (dunno why, but better safe...)
And most importantly, make sure the end users have the latest Acrobat Reader!!!
You would be surprised to find how many "incompatibilities" boil down to obsolete software being used.
To give you an example, I did an internal use web page using a FLASH animation, and several users sent me VERY ANGRY emails that the "MAC crap" doesn't work on their computers, well, guess what, for security (MS-security, not REAL security) FLASH was disabled on the network computers, nuf'said!
Failing all above, send HTML.
Hope you solve the problem. Keep us posted.
i.3d

Has anyone solved the Yosemite and WebEx issue

Ever since upgrading to Yosemite, my WebEx service has become unstable, I get varying issues from complete failure to connect, to bouncing WebEx icon on my tray, through to occasional connectivity. This issue seems to be well known, certainly within my office I am not alone with this issue. Apparently, there is an issue with Pac files and how Yosemite interacts. Has anyone found a fix for this ?

So why won't my password work?
A quote from another thread:
"Long story short the Apple Genius Bar rep told me that they KNOW it's a software flaw, but unfortunately, they have no way to fix it, other than restoring my phone to factory settings" (https://discussions.apple.com/thread/3407403?start=15&tstart=0)
I am not the only one with this problem. I was hoping someone had a solution or even a helpful suggestion.

Has anyone solved the "Error Code 0x80020022"

Similar Messages

Maybe you are looking for