Has anyone solved the privilege error message in iTunes?

Has anyone solved this? I can't get itunes to upload anything because it keeps producing this error message. I've followed the advice on other threads to change 'read & write' access and enable it across all, yet this has absolutely had no impact. Does anyone have any suggestions as to how to get round it so we can use itunes again please? Thanks.

Hi,
I got iTunes 7.3 running fine on my home computer (G5
2.7, OSX10.4.10) but still cannot get it to run on my
office MacPro Intel 2.66 without the -50 error. I
even tried downloading again this morning a new
installer from the Apple site.
Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
http://discussions.apple.com/message.jspa?messageID=4836847#4836847

Similar Messages

  • Has anyone gotten the following error message when trying to do in-app purchases? Error purchasing from App Store, then underneith that ,Cannot connect to itunes Store (0)

    I'm getting an error message when trying to make in-app purchases.
    Error purchasing from App Store
    Cannot connect to itunes Store (0)
    I can purchase songs in itunes, but not the in-app purchase for Kingdoms at War. I've checked the parental controls and all the other obvious things in settings. Let me know if anyone knows how to correct this. Thanks.

    Here is an update and more information:  I actually have two MBP's.  One is a mid-2009 model and one is a new, mid-2012.  I transferred files from the mid-2009 to the mid-2012, but I use both computers frequently.  This problem only occurs on the mid-2009 and not on the mid-2012.  I have authorized both computers. 

  • Has Anyone solved the -50 error??

    Hi,
    I got iTunes 7.3 running fine on my home computer (G5 2.7, OSX10.4.10) but still cannot get it to run on my office MacPro Intel 2.66 without the -50 error. I even tried downloading again this morning a new installer from the Apple site.

    Hi,
    I got iTunes 7.3 running fine on my home computer (G5
    2.7, OSX10.4.10) but still cannot get it to run on my
    office MacPro Intel 2.66 without the -50 error. I
    even tried downloading again this morning a new
    installer from the Apple site.
    Try what I did, it worked for me. Do the video podcasts solution part first. It's fairly painless to apply, and above all works.
    http://discussions.apple.com/message.jspa?messageID=4836847#4836847

  • Anyone Solve the FTP Error Message for Firewall??

    I have Dreamweaver CC and Mac OS X 10.9.1 Mavericks... Everything is updated, etc. I cannot connect to my server host. The error message I am getting is that my firewall is blocking it but I do not even have my firewall on (terrible I know). I am aware that this is common but I can't find a solution. If someone could point me in that direction, that would be great!
    I have been in contact with my hosting company (1and1) and went through all of their trouble shooting issues. I've been pinged back via my IP address, I have everything entered correctly and set up the way it should.
    Also if I can't get this up and going does any one recommend an app that works? I was going to try FileZilla but apparently it's full of malware..
    Transit 4 looks the best from what I have been reading. Please any one with thoughts on that?
    It is frustrating because I expect these programs to work properly and I pay for the most recent ones and they have the same problems release after new release..

    Thanks, I have tried that.. Tried restarting my OS too, turning on and off the fire wall. I tried changing passwords. And still no connection.
    FileZilla from this - http://sourceforge.net/projects/filezilla/?source=pdlp
    That was the link on my host page I did not know there was another.  I will try that one instead... This is actually the same.. my Mac is saying it's not good for the computer. I can override.
    But I would really like to get DW to connect.

  • Hey All, Has anyone seen the following error message

    "Service 'Apple Mobile Device' failed to start, verify that you have sufficient privileges to start system services."

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • When I attempt to sych with I tunes I get the following Error Message.  "Itunes was unable to load data class information from synch services. Reconnect or try again later."  How do I fix this?  This started happening after I updated to the latest version

    When I attmpt to synch my Iphone I get the following error message.  "Itunes was unable to load data class informationfrom synch services.  Reconnect or try again later.  This started after I uddated to the latest version of Itunes. What should I do?

    My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade. 
    Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down.  Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
    Still:  Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?!  Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake). 
    **banging head on table**

  • Has anyone ever received an error message that says "There are -1 articles in the folio and you have reached the -1 article maximum allowed." I'm not sure why I'm getting this message or what to do. Any advice?

    What do I need to do to be able to upload articles to a folio again? Has anyone else ever received this message?

    I'm trying to add any article to any shared folio, and I'm unable to do so.
    I'm working on a new folio, and I wanted to start populating it with articles so I tried to add an article and I received the error message saying that I've reached my limit. But it seems unusual that I'm getting that, especially since the limit it mentions is "-1 articles." I've never seen this error before.
    I've tried deleting entire folios that had about 20 articles within them and it still sends me the same message.
    I have noticed that I am able to upload articles to an offline folio... but I don't think that's helpful to me right now.

  • Has anyone solved the "garbled characters" issue i...

    When I use Nokia Maps on my N95, all streets and towns which contain special characters such as: é, è, ü, ä, ö, etc… do appear garbled. For example,
    Zürich appears as: Zã¼rich
    München appears as: Mã¼nchen
    Liège appears as: Liã"ge
    I saw a couple posts on this forum where people suggested to format the memory card, some other suggested to reload the firmware (my N95 has 12.0.013) but nothing has helped. I went as far as using someone's PC whose WinXP is installed in French - I thought that maybe the operating system or regional settings could have some influence, but I was wrong.
    Has anyone solved this extremely annoying issue?
    Thx

    I solved it. It took me one evening. I wonder why Nokia haven't published any comments on this old issue.
    Solution can be found below, but before I want to tell about some technical details. Maybe guys at Nokia will read them
    As someone on this forum said before the problem is that map names are in UTF-8 format, but phone tries to show them using another encoding. After some googling I found that this issue is well-known because Nokia phones use ISO 8859-1 (which is similar to Windows-1252, Western European) by default but some application assume UTF-8 to be default.
    At first, I discovered that when I start Nokia map with empty SD card and allow it to download something from internet, all names were shown correctly. I supposed that the problem sits in that awful Map Loader, but I was wrong: it does absolutely nothing special with data files, just downloading and unzipping. And this super-mega-feature-rich-map-loader require about 40Mb to download for .NET 3.0 plus 10 Mb for itself. Never seen anything worse
    So I've started to compare contents of one SD card with incorrect street and city names and another with correct.
    After some time I came across Cachedatheader.cdt file in diskcache folder. And what do you think?
    The file from correct SD card contains a literal string: "UTF-8". While incorrect one contains a string saying "ISO 8859-1". I've nearly fell out of my chair after seeing that.
    I've replaced wrong file with correct one and names became readable on all my 180mb of previously downloaded maps.
    Finally, after playing with it some more I found a simple solution which should work for everyone:
    ***** SOLUTION *****
    1. Enable internet access in Nokia Maps application (set it to When Needed).
    2. Access memory card from your PC and go to "\PRIVATE\20001f66\diskcache" folder.
    3. Delete "CachedatHeader.cdt" file. Perhaps you should backup it somewhere before deleting, but it looks like it can be removed safely without affecting existing maps.
    4. Put the card back in the phone if you extracted it and start Nokia Maps.
    5. Allow Nokia Maps to access internet and try downloading some new locations (you don't need to download much, just let it access server) or searching for something.
    6. Now codepage should be correct and all names become readable.
    This effect seems to be permanent and will stay even if you disable internet access later. Also note that you don't have to format card, remove or reinstall any map files. The problem is just in one small file.
    Nokia Maps recreates missing CachedatHeader.cdt, but it will recreate it correctly only if internet access is enabled when it starts. Probably the best way to avoid wrong codepage problem is to enable internet access at first start of Nokia Maps and use Map Loader only after downloading some bits of map directly from the phone.
    Message Edited by ankor85 on 09-Jan-2008 09:02 PM

  • Has anyone solved the "Error Code 0x80020022"

    "The disc can’t be burned because communication between the computer and the disc drive failed (error code 0x80020022)."
    I have researched this at length as I have just been getting this message, but I don't see how to resolve it.
    Has it ever been resolved and if so, I would really like to know how.
    Cheers

    Michael,
    An update on the ongoing superdrive error:
    At the time I responded to your post, I was burning DVD+Rs because my superdrive didn't like -Rs very much and would error out on them. Yesterday, to test my theory on Disk Warrior, I bought some DVD-Rs and burned about 3 in a row successfully before I got the 0x80020022 error again. I ran Disk Warrior again and have been burning the -Rs consistenty (I have a lot of junk to archive off my HD.) But I thought that the type of media might be important to the conversation because the superdrive appears to like one type of DVD blank over another.
    Some key points:
    1) You said you're using a Mac Mini as your bootup disk. I am using a MacBookPro. This may be significant.
    2) Because the error reappears routinely, this is by no means a complete fix. It needs to be repeated when the error reappears. However, in lieu of a more permanent solution, I'll take one that appears to work, even temporarily, until Apple or somebody out there can tell us how to fix this more permanently.
    3) Because it appears to be fixed after running Disk Warrior, I am going to conclude that it is a software error, one of the operating system not communicating with the superdrive, and has little or nothing to do with the drive or the media, as I've read on other forums regarding this error. Of course, if your drive really has gone bad, who's to say that it won't prompt the same error, if it is an all-purpose error. I had my superdrive replaced last year, so I'm pretty sure it's not the drive.
    Jim

  • TS1702 I have an I-pad 4.  I tried downloading OS 6, and part of the way in the download process I get an error message.  Has anyone else experience an error message?

    I get an error message when downloading iOS 6.  Anyone else have the same problem?

    I think you may have been thrust into the future Teelea.
    Now that I got that out, and I know this is a little off topic of the title of this postig but - I am having a serious problem with iOS 6 on my iPhone and iPad. For the iPad, which is what we are discussing here, since the update, any app that relies on a "play" button will not play. I hit the sideways facing triangle and it changes for 2 seconds to the "pause" symbol as if it is going to play, then changes back to the arrow. This is literally in every app that plays audio or video.

  • Has anyone solved the iPod touch and Comcast email problem?

    The reason I got a touch is to check email when traveling. As of a few weeks ago, I could no longer do this. The comcast.net page now requires Flash and directs me to the install page (which I cannot download to the touch). I asked about this at the Apple Store and the touch doesn't have/cannot have Flash.
    Has anyone figured out how to get past the Flash page to just sign in and get email? I am going around with Comcast about this -- they continue to mix up the iPhone and the touch. I will post if I get a solution from them. In the meantime, can anyone help?

    If you do NOT have the January Software Update, you must use the Webmail for Comcast. from Safari, type in http://mobilebeta.comcast.net works as advertised.
    If you have purchase the January Software update:
    Click 'Mail' Application
    Click 'Other'
    POP Information
    'Name' is whatever name you want to call the account
    'Address' is you email address
    'Description' Whatever you want to call the account
    Incoming Mail Server
    Host Name = mail.comcast.net
    User Name = [Your email address]
    Password = [Your password] THIS IS CASE SENSITIVE
    Outgoing Mail Server (SMTP)
    Host Name: smtp.comcast.net
    User Name = [Your email address]
    Password = [Your password] THIS IS CASE SENSITIVE
    It is really easy: just followed comcast for Outlook link
    http://www.comcast.net/help/faq/index.jsp?faq=EmailOutlook17742
    Looks a lot nicer than in the web.
    If you make any errors or need to change anything, go to home, then settings, then Mail

  • Has anyone solved the car integration problem with iOS8?

    iOS8 broke my car radio's ability to control my iPhone to play music.  I use USB, but many people in this community also suffered this over Bluetooth.
    Resetting network settings, or installing an iOS update, will make it work once or twice (connecting to the car) but not more.
    Has anyone figured out a permanent fix?
    Does Apple acknowledge this bug?

    Afraid start up is still rough.  Even more button pressing required to access.  Some apps still reluctant to open.  Either slow or simply won't open. 
    THanks  for your comments.

  • Has anyone solved the problem of sending Pages docs to Windows machines?

    I am trying to create a business newsletter that can be emailed to anyone who wants it. I'm working with OS X 10.4.10 and Pages. My business partner, who works on a PC, can't read a Pages doc, so I converted it to a pdf, and Windows won't read that, either. So I exported it as a Word doc, and he can read that, except the colors aren't true. What kind of a program creates files that pdf readers can't view? And why did I spend my money on Pages if it can't create a file everyone can read?

    Strange, I've been emailing PDFs with no problems at all.
    I am the only MAC-MAN in the office so all my work goes to 100% PC "market".
    A wild guess - are you using Apple Mail app? If so, make sure the "Send Windows friendly attachments" is selected.
    Do not encrypt the PDFs.
    Do not include EPS graphics (just in case...)
    JPEGs rather than TIFFs (dunno why, but better safe...)
    And most importantly, make sure the end users have the latest Acrobat Reader!!!
    You would be surprised to find how many "incompatibilities" boil down to obsolete software being used.
    To give you an example, I did an internal use web page using a FLASH animation, and several users sent me VERY ANGRY emails that the "MAC crap" doesn't work on their computers, well, guess what, for security (MS-security, not REAL security) FLASH was disabled on the network computers, nuf'said!
    Failing all above, send HTML.
    Hope you solve the problem. Keep us posted.
    i.3d

  • Has anyone seen the below error before? Does anyone have any ideas on how to

    go about troubleshooting it? I am using a PCI-GPIB card on a WIN95 machine in an attempt to communicate with an
    ESP300 Universal Motion Controller ver 3.03. which reponds to ASCII commands.
    As a basic first step (using LabVIEW 6.0.2) I first attempted the example on p.20-6
    of the LabVIEW ver 6 Measurements Manual. I passed the string "*IDN?".
    I get the following error from the Simple Error Handler:
    Error -1073807339 occurred at VISA Write in esp300_scott1_mod4.vi
    Possible Reasons:
    VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
    In a second attempt I tried using LabVIEW version 5 with the example on 8-12 of the
    User Manual, here I g
    et the same error from the Simple Error Handler:
    Error -1073807339 occurred at VISA Write in esp300_scott1_mod4_ver5.vi
    Possible Reasons:
    VISA: (Hex 0xBFFF0015) Timeout expired before operation completed
    N.B.--> I have successfully used NI's Measurement and Automation Wizard to communicate
    with the instrument. When I pass the string *IDN? I get the response:
    ESP300 Version 3.03

    Your best VISA troubleshooting utility is the VISA Interactive Control (nivisaic.exe). From this utility, you can use the VISA protocol to communicate with each of the VISA resources available on you system. If you are unable to get this utility to properly recognize or use your NI-GPIB card, It may be suggested to uninstall/reinstall the NI-VISA distribution. If you can get the utility to work then there is a programmatic problem which you must address. Debugging programmatic issues is best troubleshot using the VISAIC utility, NI-SPY (nispy.exe), and highlight execution. If you can outline a flow from within VISAIC, using NI-SPY you can log this flow and attempt to emulate it from within LabVIEW. Make sure each of the functions has the proper inputs. Also, try usin
    g some of the VISA/GPIB examples shipped with LabVIEW.
    Ryan Mosley

  • Has anyone solved the Yosemite and WebEx issue

    Ever since upgrading to Yosemite, my WebEx service has become unstable, I get varying issues from complete failure to connect, to bouncing WebEx icon on my tray, through to occasional connectivity.  This issue seems to be well known, certainly within my office I am not alone with this issue. Apparently, there is an issue with Pac files and how Yosemite interacts.  Has anyone found a fix for this ?

    So why won't my password work?
    A quote from another thread:
    "Long story short the Apple Genius Bar rep told me that they KNOW it's a software flaw, but unfortunately, they have no way to fix it, other than restoring my phone to factory settings" (https://discussions.apple.com/thread/3407403?start=15&tstart=0)
    I am not the only one with this problem. I was hoping someone had a solution or even a helpful suggestion.

Maybe you are looking for