Has anyone succesfully set up iSight video with Yahoo Messenger 2.5.3?

If so, could you pass along how you did it? i.e. what settings etc.

Yup. I just trashed the preferences on this Intel 17 and restarted Yahoo. Opening the camera crashed the program. Should I be looking to trash any other Yahoo Messenger related things or can it be said the program suddenly doesn't work on Intel Macs?
It did.

Similar Messages

Does iSight work with Yahoo Messenger?

Before I buy, can anybody tell me does iSight work with Yahoo Messenger? Thanks.

It does for me (as well as Yahoo! Messenger for Mac works for anyone.)
Take a look at the responses to mike jones6's thread, iSight Compatability? The responses there will give you a more expanded answer your question.
If you have more specific questions after reading this thread, post back here, and we will be happy to try to help further.
Depending on what you want to do with Yahoo, searching iSight Discussions for "Yahoo" will give MANY threads that may be of interest. One example: Compatibility of cams

Has anyone had any luck compressing videos with resolutions higher than 1080?

Everytime I try, it fails instantly. Is this not allowed in Compressor 4? It was possible in Compressor 3.

I have a 4K video that I'd like to compress using H.264 or X.264 and restrict the data rate.
Here are some details of the video (created in Motion) I am trying to compress:
DIMENSIONS: 4096 x 2048
FORMAT: H.264
FPS: 24
DATA SIZE: 53.2 MB
DATA RATE: 52.03 MB
and here are settings that I would like to compress it with using Compressor 4.0.4:
CODEC: H.264 or X.264 (both fail)
FRAME RATE: current
KEY FRAMES: Automatic
DATA RATE: Restricted to 7000 kbits/sec (setting it to automatic or any other data rate also fails)
QUALITY: Best
HEIGHT AND WIDTH: 100% of source
I have been able to get a successful compression with this 4K video file using ProRes 422, so that leads me to think this is a codec problem, not a Compressor application problem. Furthermore, I have had the same problem just using Quicktime 7 to export a video with these settings, I get the same failed results.
In Compressor it gives me the message Failed: Quicktime Error: -108
and in Quicktime 7 it gives me the message Failed: qKitErrorCatchAll (-6662)
So, if you had any suggestions about a better codec to use, one that allows me to restrict the data rate on higher than 1080 video files, it would be much appreciated.
Thanks
Evan

Has anyone created a time-lapse video with Final Cut Pro X?

I've taken a series of 2,631 I'd like to create a time-lapse video from. The process has been excruciating so far. I'm getting tons of spinning beachballs. I'm running Lion, 10.7.1.
Before I do any more hair pulling, has someone else out there successfully used FCP X for creating time-lapse videos? Any tips you can offer?

I love using FCPX for time lapse movies, here is an example:
http://vimeo.com/27460065
My workflow is as follows:
1. I import the photos to QT player 7 as an image sequence
2. I save the resulting movie in QT7 in Prores HQ, keeping the original movie size (eg. 3500x1940)
3. I import the movie to a 1920x1080 project in FCPX.
4. I can now easily create pans and zoom ins without losing quality.
I hope this helps.
Izhar

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option. Any suggestions? Thank you!

petermtnbk wrote:
I've read other discussions that have suggested changing the format of the username and password when having login problems. I'm not familiar with NT-Status Codes. Could changing the format of the username make any difference? Something like... "workgroup/username" or "username@domain" or "domain/username" or some other combination of workgroup, domain, username, computername.
The issue has nothing to do with the format of the user authentication. What you are reading is about the Lion Mac connecting to a Windows computer that is part of domain or workgroup. The method changed slightly compared to Snow Leopard.
KM does support FTP so that is still an option, but I would ideally would like to set up SMB scanning. I'm not sure if KM is going to support AFP anytime soon.
With the lack of SMB support and KM offering no alternative at this stage then I suggest you look at using FTP. While Lion removed the option to enable FTP via the Sharing pane in System Preferences, it can still be enabled via Terminal using the following command
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
You will be prompted to authenticate using your Mac's admin account & password. Once this is done, you can then configure the address on the copier to push scan using FTP. The keys are;
The host name requires just the IP address. No leading slashes like SMB
The path will be the folder that you want to scan to, also entered without a leading slash. For example, Desktop
The user name will be the short name of the account who's folder you want to scan to.
The only other option may be WebDAV if the KM supports it. We have this with our imageRUNNER ADVANCE and with a document scanned to a shared folder in the copier hard drive, we can then connect to that folder by using Finder's > Go > Connect to Server facility. You then just enter
http://ipaddress/share
which connects you to the shared folder and lets you see the document you scanned. You also have the facility to set subfolders for security of users documents.

Has anyone tried M-Audio ProjectMix IO with Logic?

Has anyone tried M-Audio ProjectMix IO with Logic?
I know M-Audio's drivers have had issues, but it looks interesting.

The Fishman Triple Play is simply the best hardware option to date for triggering external MIDI whether hardware sound modules or software instruments.
Having used many MIDI guitar converters since '89, I can say that the FTP tracking is very accurate and velocity dynamics are reasonably wide from soft to loud.
The Triple Play app works in Stand Alone mode in OSX 10.7.5 but not in 10.8.3.
In 10.8.3, you load the Fishman Triple Play plug-into into the I/O of a software instrument track. Open the app and adjust sensitivity, mono vs poly, transposition down or up an octave, etc. Save your set ups as presets which can be scrolled through with the D-Pad control on the converter.
While the GR-55 is an amazing all-in-one solution in a small, light weight package (in relation to the bulk and weight of several actual guitars, basses, amps, fx, etc), it is a poor choice for triggering external sound sources. Whereas I can play "bass" lines on the open E and A strings with my now obsolete Roland GI-20 and RMC piezo equipped guitar without any sense of latency, the GR-55 latency was simply intolerable. Of course one could revert to the old strategy of playing parts an octave higher on the fret board to increase speed and accuracy of tracking. But what about playing "piano" with fretted triads against the open E or A strings???
Think I'm full of hot air? Skim through this: http://www.joness.com/gr300/MIDI_SPEED.htm
I traded my GR-55 towards a JTV-59.
Once set up, you're gonna love the FTP. As I mostly sequence MIDI in Logic, being wireless is incredibly convenient.
Message was edited by: CC#11

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Has anyone successfully tethered a Nikon D7000 with Aperture 3.1?

Hi,
I have a new Nikon D7000 and tried to tether it to Aperture 3.1. Aperture recognizes it as a D7000, but I can't get an image to display. I'm outputting JPEG right now and can wait until RAW is available, but it would be convenient to tether so I can get immediate feedback on the image while I'm shooting.
Has anyone had success tethering the D7000 with Aperture 3 or is the software not there yet? I'm talking about having the image immediately downloaded to the iMac and automatically displayed after you take each photo, not downloading at the end of the day.
Thanks

UPdate - the key was opening a new project in Aperture 3. Once I did that, Aperture recognized the D7000 and I could shoot from the camera and have it displayed immediately on the iMac.
It works right out of the box. Yea!!!
Message was edited by: luckyphoto2010

Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

Has anyone had a opf parse error with container.xml missing, when it is actually present plz ?

Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

Has anyone lost the info from games with the new iOS7? My games reset to level zero! Argh!

Restore from your iTune Backup.

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

What problems, if any, has anyone had by changing to iCloud with their iWeb pages?

The iWeb Application will still run after Mobile Me will be turned off; you can export your web pages to a folder on your hard disk and use ftp to upload the pages to another hosting service.
The generated webpages however will refer to icons located on the mobile me server. To make the forward/backward arrows in slide shows work again you will have to patch the iWeb Application. See Old Toad's tutorial on how to do this:
Modify the iWeb Application: http://oldtoadstutorials.net/No.26.html
Also there is a nice tutorial on how to transit from Mobile Me to another service; see Roger Wilmut's page here:
Migrating from Mobile Me:
http://www.wilmut.webspace.virginmedia.com/notes/migrate/frommobileme3.html
Regards
Léonie

Has anyone used a boxware keyboard buddy with their iphone?

has anyone used a boxware keyboard buddy with their iphone?

kj6tk wrote:
I guess if you travel the iPhone is not the device to buy.
And which device to buy for travel? As far as I know other smartphone platforms even don't have an update facility like AppStore. And by the way what are your criteria for the perfect travel phone? I would place being able to use it in other countries (world phone), having easy access to internet and email and ability to remotely sync Contacts and Calendar on top of my list. All of which iPhone is capable like few other phones.
I'm sorry, John, but your statement seems like utter nonsense and is misleading for others. First being able to update apps doesn't cross my mind as a main functionality for travel. Second I was just travelling to SC and easily installed a new app from iPhone and updated an existing one. In your case I believe there's a mishap with AppStore. Probably you have a false update notification. Just compare versions of the apps you have with the versions of the same apps AppStore shows. I bet version are same. That's why it doesn't let you install.
If you want to sync your iPhone Contacts and Calendar (which seems more like a genuine travel requirement) you can do it via MobileMe or Yahoo and few other similar web services.

Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

Modular747 is a troll with very little real knowledge of the iPhone charging systems (as evidenced by his uninformed comments in other threads).
It could very well be iOS 7 refusing to charge from "non-authorized" accessories. We have done A/B tests with the same accessory (in this case cables) with iOS6 and iOS7 and have seen the cable work with iOS6, then not work (i.e. not charge) with iOS 7. Same device, same cable. Only change was the OS.
Keep the pressure on Apple, folks. It is not OK to make working accessories unusable with a software update.

Does iChat in Lion have video calls with Yahoo messenger??

Does iChat in Lion have video calls with Yahoo messenger?
so far is supports only AIM and Apple ID for video chat but in Lion iChat supports Yahoo messenger, do they have video calling also or only text chat is offered in this version?

Hi all,
iChat will Video to other iChat users for Jabber (Google, Facebook and others) and Yahoo Names.
In neither case will it Video to any Web browser access to the service the buddy may be on such as the Google Mail web mail or iGoogle pages access to the chat option.
Nor will it video to any Standalone app (There is one for PC for GoogleTalk) and obviously the Yahoo app on both PCs and Macs.
iChat has not done this since Jabber was added at iChat 3 (OS 10.4/Tiger) some while ago.
The AIM for Mac app has never been able to do Video.
Video chatting to the AIM app for PCs can be fraught but is supposed to work.
It also tends to work to the Trillian App with the Pro Add-on (which Costs)
The Yahoo for Mac 3 Beta has been in beta for years. It could be argued that it has never been "Supported"
iChat 6 's behaviour may not be what you want but it is entirely consistent with iChat 3 through 5 with the Jabber options.
You could use this page
http://www.apple.com/feedback/ichat.html
8:56 PM Wednesday; November 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Has anyone succesfully set up iSight video with Yahoo Messenger 2.5.3?

Similar Messages

Maybe you are looking for