Has anyone successfully interfaced a PCI-7344 with a Techno-Isel servo box?

I'm specifically interested in the wiring between the UMI-7764 and the Techno-Isel Servo breakout box. Techno-Isel makes good quality stuff but their documentation and support leave something to be desired.

Hello Charles,
Thank you for using our discussion forum. Do you happen to have the pinout for the servo breakout box? I haven't used Techno-Isel's servo systems but if we can find pinouts for this box I'm sure we can determine the appropriate connections. I looked on their website but couldn't find any relevant information.
Regards,
Nipun M
Applications Engineer
National Instruments

Similar Messages

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Although I gave up investment tracking for personal reasons (I had used Quicken Deluxe 2002 for many years for that reason), my understanding is that the new Quicken 2007 for Lion/Mt. Lion is completely the same feature wise as Quicken 2007 for PPC. It will run on Snow Leopard, too.
For $15, why not download it and just try it and LET US KNOW!

Has anyone successfully used the ZTE Open C with an AT&T microcell?

I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.

I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
Check the Microcell settings.
Check the data connection settings on your FxOS device
Make sure your Microcell is properly connected to WiFi
and check the AT&T support page for more info
For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D

Has anyone successfully installed JAXM 1.1.2 with JWSDP 1.2?

I'm unable to get the /jaxm-provider app from jaxm 1.1.2 running on jwsdp 1.2. Tomcat gives a failure message when I try to start the app manually but no detailed error message is logged. The jaxm samples that do not use a messaging provider are working fine. Has anyone else gotten the jaxm 1.1.2 provider to run?
Thanks,
Mike

Problem solved. I had installed Axis 1.1 as a web app. log4j-1.2.8.jar is copied to JWSDP_HOME/common/lib as part of the Axis installation. When I removed that jar, /jaxm-provider started with no problem. Axis complains about the missing jar but it seems to work anyway.
Mike

Has anyone successfully gotten Endnote X5 to work with Word 2011 on OS 10.7.5?

I just get the error in Word that Word can't fire the event. The Endnote toolbar does not show up in Word.

Endnote sys that X5 is not compatible with Mountain Lion due to a "bug" in the OS and suggests buying their "new" Endnote X6. They also offered two workarounds so far that have not worked saying that it is Apples responsibility to fix this "bug". Their support replied to me as follows:
Thank you for contacting Thomson Reuters Technical Support.
EndNote X5 is not officially compatible with Mac 10.8. The issue that you face is due to a known bug in Mac 10.8.2 update for Apple's Mountain Lion operating system.
If you would like to read a technical description of this underlying bug within Apple's 10.8.2 operating system update, the following blog post outlines the issue:
http://brian-webster.tumblr.com/post/32830692042/a-workaround-for-aesendmessage- hanging-on-os-x-10-8-2
For more information on EndNote’ compatibility please refer to the following link:
http://help.thomson.com/default.asp?portalid=TSCINT&article=113230
In order to work around this issue until the underlying problem is addressed by Apple, please follow the steps given below:
1. Open your Activity Monitor. Activity Monitor is found inside a folder called "Utilities", which is inside your "Applications" folder.
2. With the Activity Monitor running, choose "All Processes" from the "Show" drop-down and then sort the display by the "Process Name" column by clicking the column's label.
3. After sorting this list by Process Name, look for a process called 'appleeventsd'. If you are able to find the appleeventsd process, highlight this entry and click "Quit Process".
4. When you are prompted to confirm this action, press "Force Quit".
5. Once appleeventsd has been reset by the Force Quit selection, switch back to EndNote to see if you're still experiencing slowness.
6. Also try inserting citations in Word and see if you are getting any error message.
As you mentioned, EndNote X6.0.2 update was released to address this issue. Since you have EndNote X5 you will not be able to install this patch for a permanent fix on this. And since you already own a previous version of EndNote, you will be entitled for an upgrade version of EndNote X6. These upgrade versions are priced lesser than the full versions. For EndNote X4 and X5 users, they will be entitled for a 30% discount on this upgrade price considering this bug. If you wish to avail this offer, please visit:http://endnote.com/buy/online and use the coupon code: techup.
Please visit the following Knowledge Base article for more information:
http://help.thomson.com/default.asp?portalid=TSC&article=123873
If you wish to use EndNote X5 and if the tools are still missing in Word, please make sure that the Visual basic component for Microsoft Word 2011 is installed. Visual Basic is required for the use of EndNote X5 with Word 2011. If it is not installed, run a custom installation of Office 2011, selecting Visual Basic for Applications. This component of Office is mandatory for Cite While You Write tools to work.
If the issue continues, it possible that the issue can happen if the Word documents Gallery is set to open. Please check to make sure this option is not checked in Word.
1) In Word, go to the Word menu / Preferences / General.
2) Uncheck the option labeled Open Word Documents Gallery when application opens.
3) Press OK.
4) Quit Word by going to Word menu / Quit Word.
5) Open EndNote with your library.
6) Open Word.
This will get the EndNote toolbar appearing in Word. If the issue continues, it is possible that the EndNote Cite While You Write add-ins might be disabled in Word. Please follow the below steps to re-enable the tools as follows:
a. Open a Word document.
b. Go to "Tools > Templates and Add-Ins".
c. You should see the below EndNote files listed under "Global Templates and Add-ins"
EndNote CWYW Commands.dot
EndNote CWYW Word 2011.bundle
d. If any of these file(s) are unchecked, check it, and click OK.
If the above files are not listed in "Global Templates and Add-ins", then I would recommend you to follow the steps given to check the Word Startup folder and set that in the Customizer:
1. In Word, click the Word menu next to the apple and choose Preferences.
2. Click File Locations.
3. Click on Startup and then click Modify.
4. Browse to Applications---Microsoft Office 2011---Office---Startup---Word. Click Choose. (Please note: For non English version of Word, the name of the Startup folder may be different. Please choose your closest language equivalent in this location).
5. Click OK on the Preferences window.
6. Close Word.
7. Open EndNote and your library.
8. Click on the EndNote menu next to the apple.
9. Choose Customizer.
10. Check the option for Cite While You Write. Click Next.
11. Click Next and the process should complete----click “Done”.
If the tools are still not present in the Tools menu of Word, please close Word then copy and paste the EndNote CWYW Word 2011.bundle file into your Word startup folder:
Bundle file: Applications | EndNote X5 | Cite While You Write | EndNote CWYW Word 2011.bundle
Word startup folder: Applications | Microsoft Office 2011 | Office | Startup | Word
Close and reopen Word. Please check whether the EndNote tools appear in Word and that you are able to click on them.
Once again I sincerely apologize for the inconvenience caused. Please check if this helps in resolving your issue and kindly let me know if you need any further assistance.
Based on the solution provided above, this case will be closed and no further action is required on your part. However, if this does not resolve your issue, please reply to this email and your case will be immediately reopened for additional support.
Sincerely,
Hema
Hema Vetrivel
Product Support Analyst
Thomson Reuters

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't. If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. Thanks.

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. (TV subscription is through DirecTV and ISP is TWC.) Thanks.

If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
Regards.

Has anyone successfully transferred contacts from a Blackberry to an iPhone?

Has anyone successfully transferred contact info from a Blackberry to an iPhone?

Hi Friend,
If it's possible to export contacts from Blackberry to the SIM card, then you can place that SIM card into iPhone and import them to iPhone (settings>>mail,contacts,calendars>>import contacts from the SIM Card.
Hope it helps

Has anyone successfully got a refund on graphics card fault

My Mac Mini (mid 2011) purchases in February 2012 has died. The graphics chip has gone and the display is some funky colours at boot before it crashes and reboots. I'm unable to login at all, even via safe mode.
It's almost 3 years old to the day and i'm covered by UK law for 6 years. But has anyone successfully got a refund or replacement?
I'm concerned they might want to take it in to test and try to repair it, but presumably that would mean an entirely new motherboard and i can't be without a Mac (my main computer) for so long. Do they even make / have in stock Mid 2011 Mac Minis anyway? I'd guess not.
Should i go ahead and buy a new one with the reassurance i'd get some money back?
I've made no alterations to the mac other than to upgrade the ram from 4GB to 8GB.
thanks

Apple never mad a promise to replace the Mac. Only to fix your OR replace at Apple's option.
Contact Apple and discuss it with them
you can also
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Has anyone successfully been approved for a Paid Books account?

I submit my completed application for a Paid Books account over 7 business days ago, and I've yet to hear so much as a confirmation of its reciept yet. Judging by the existing conversations in this forum, this is not unusal, it seems.
Thus, my questions is this: has anyone successfully been approved for a Paid Books account? One success story would be enough to inspire some hope while the nail-biting waiting for a response continues.

It took a while to get approved and when I submitted the iBook, it took a while to have the book approved. But today it was approved. They approved the sample and the paid ibook at the same time (eReading: The Best Thing). I submitted them on the same day. It was indeed a nailbiting affair

Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?

Has anyone successfully managed to get VZW to raplace Fascinate with a different phone?
If so, could you share with me on how you convinced VZW to do it?(which department?)
I love my Fascinate, but not when it can't get calls. I would prefer to have a Fascinate with
zero problems, but that appears unlikely. So I guess my best option is to get a different
phone(Samsung, Motorola, or others)
Thanks!

I successfully got a swap out of my Fascinate with a Droid Incredible 2.
I private messaged VZW agents on these forums the following message and through the course of 3-5 days I successfully was granted an expception and allowed to swap out my device (with no contract extension or upgrade eligiblity extenstion). This was after several phone calls and numberous wasted hours trying to convince them the Fascinate was not a good phone.
If I have been rude in any way during this message, I sincerely apologize, I did not mean it. I am a frsutrated owner of a bad piece of electronics. I am aware it is not VZW's fault, but I think you need to stand beind the phones you sell and rectify situations that are bad.
I am a Samsung Fascinate owner and to say the least this phone has been the biggest source of frustration I have ever had to endur in the 20+ years I have owned a cellular phone.
The have been number rous issues with my original phone and the replacement (certified replacement) phone I have gotten. These issues include, but are not limited to:
1. glitchy UI
2. constant forecloses and freezes
3 auto reboots
4. inoperable phone for 20 - 30 minutes at a time. Can't access apps, can't make calls, can't send texts, phone is useless to me.
5. not receiving calls/texts
6. missing voicemails
7. increased battery drain
8. random flickering of screen lights while using the phone.
Now I have performed the following steps at the suggestion of VZW tech support on both my orginal phone an replacement phone
1. Hard resets, factory resets
2. Soft resets,
3. Clear cache on the phone
4. Removing apps
5. Updating roaming capabilities
After all these issues and all the suggestion on fixes, the phone still performs poorly and is not a reliable phone at all. Like I stated previously i am beyond frustrated.
I am aware these problems are software issues not a hardware issue; a refurbed Fascinate will not correct them. Hard resets do not fix the problems. I have scoured the message boards on this website (VZW forums) and I am aware the VERIZON is aware of all these issues with multiple Fascinate users.
I am asking to be allowed to swap my Fascinate for another, DIFFERENT model of phone. I am fine if that is a refurb, as long as it is a DIFFERENT model of phone and not a Fascinate. I know this is possible because users on your very own forum are stating it has been done. I am asking it be done in my case
Best thing I can say is stick to it....sitck to you guns and don't back down and don't be allowed to think there is afix when there is not.

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option. Any suggestions? Thank you!

petermtnbk wrote:
I've read other discussions that have suggested changing the format of the username and password when having login problems. I'm not familiar with NT-Status Codes. Could changing the format of the username make any difference? Something like... "workgroup/username" or "username@domain" or "domain/username" or some other combination of workgroup, domain, username, computername.
The issue has nothing to do with the format of the user authentication. What you are reading is about the Lion Mac connecting to a Windows computer that is part of domain or workgroup. The method changed slightly compared to Snow Leopard.
KM does support FTP so that is still an option, but I would ideally would like to set up SMB scanning. I'm not sure if KM is going to support AFP anytime soon.
With the lack of SMB support and KM offering no alternative at this stage then I suggest you look at using FTP. While Lion removed the option to enable FTP via the Sharing pane in System Preferences, it can still be enabled via Terminal using the following command
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
You will be prompted to authenticate using your Mac's admin account & password. Once this is done, you can then configure the address on the copier to push scan using FTP. The keys are;
The host name requires just the IP address. No leading slashes like SMB
The path will be the folder that you want to scan to, also entered without a leading slash. For example, Desktop
The user name will be the short name of the account who's folder you want to scan to.
The only other option may be WebDAV if the KM supports it. We have this with our imageRUNNER ADVANCE and with a document scanned to a shared folder in the copier hard drive, we can then connect to that folder by using Finder's > Go > Connect to Server facility. You then just enter
http://ipaddress/share
which connects you to the shared folder and lets you see the document you scanned. You also have the facility to set subfolders for security of users documents.

Has anyone successfully reset their Skype account ...

I've posted on this before, but none of you good people have shared your thoughts on this. Unfortunately, Skype Customer Service don't appear to have a "standard response" e-mail template to address my problem.
Nine days after I first reported that my Skype account has been hacked I am still going round in circles, with "standard response" e-mails from the Skype Customer Support people asking me to do something which I have already tried but which was not the correct thing to do to reset my Skype Account password.
My Skype Account password has been changed by a hacker.
My Microsoft Account, which is linked to Skype, has not been hacked and the password has been changed (three times in a week ..... see below).
I need to change only my Skype account password but the password reset links take me through to Microsoft and I end up changing my Microsoft account password. This does not resolve the Skype Account Password situation.
Has anyone successfully reset their unknown or forgotten password from a Skype account which has been linked to their Microsoft account?
Does anyone know whether Skype themselves can unlink a Skype Account from a Microsoft Account? Unfortunately I can only do it with the password I do not have!!! I feel that this could be one way of changing my password without being redirected to the Microsft Account Password Reset option.

Well, it's me again. However, I now have a new name on the Community Forum as I have had to re-register as I no longer seem to exist.
I contacted Skype Customer Support via their web chat service and the operator unlinked my Skype Account (which, if you've read any other posts from my original name alison01326) you will recall was hacked and I was unable to make a change to the password as I kept getting through to the Microsoft account password change which was not the password that needed changing.
I would have said, that if you need to unlink the two accounts, just ask. But now I am not so sure. My Skype Account (the one which was hacked, and still has someone else's password on it) has vanished, taking with it £10 of Skype Credit and the World Minutes which I receive monthly as part of Office 365.
I now have five or six different customer service references to quote, and not only can I not get my account verified (as my memory doesn't stretch back to when I first had a Skype account) I also appear to have lost £10 and a valuable "free" service.
Have been in tears over this as 11 days have passed since the hacking and nothing positive has been achieved. Does anyone else have the same experiences, and what was the outcome?

Has anyone successfully printed on Konica Minolta Magicolor 2530DL on Mac OS X 10.9

Has anyone successfully printed on the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9?
Also has anyone successfully printed on the Epson EPL-5700i after upgrading to Mac OS X 10.9?

I realize that most people tend to visit the forums to report problems rather than visit the forums to report successes after an upgrade. And I appreciate John Blanchard1's taking the time to reply to my posting.
Dakoda mentions problems printing to a Konica Minolta C280 and the thread that John Blanchard1 posted refers to problems printing to both Konica Minolta BizHubs (C652 & 501).
However, the existence of these problems with other KM printer models does not let me know if anyone has been successful printing to the Konica Minolta Magicolor 2530DL after upgrading to Mac OS X 10.9 or even if anyone has had a problem with printing to the 2530DL after upgrading to 10.9.
On October 28, 2013, a Konica Minolta technical support agent told me -- after checking with his supervisor -- that regarding the Konica Minolta Magicolor 2530DL that they will not be upgrading the 2530DL printer driver. In fact they have not upgraded the driver since 10.6. I learned on their support site that the 10.6 driver has continued to work with 10.7 and 10.8. They have not yet updated their support site for compatibility of their line of printers with 10.9.
So I would like to find evidence that this printer has continued to work for someone after the upgrade to 10.9 rather than upgrade and then have to downgrade to still be able to use this printer.

Has anyone successfully installed a SimpleWifi antennae on Os 10.6.8?

Has anyone successfully installed a SimpleWifi antennae on OS 10.6.8?

Looking at their website I don't see any driver section. For USB that would be especially important. Direct to ethernet though wouldn't typically be a problem. I would contact their support and ask what they have available for your machine, and/or your WiFi router you use. The router is whatever distributes the internet wirelessly from your modem (sometimes the modem itself). If you are trying to pickup someone else's WiFi, note the security of it may not always be reliable unless you know their WPA2 password is fairly good.

Has anyone successful​ly interfaced a PCI-7344 with a Techno-Ise​l servo box?

Similar Messages

Maybe you are looking for

Has anyone successfully interfaced a PCI-7344 with a Techno-Isel servo box?