Has anyone successfully solved the distorted playback (itune

Once upon a time, iTunes worked great! Music played without
any distortion. Now, a song will play for a minute or so then the sound breaks up, distortion etc. If I pause the song and click the play icon, it plays a little longer then
repeats the distortion and chopped sound. I've tried upgrading to the latest software and still the problem exists. Tried a few things mentioned on the forum and still the same results. Any help is much appreciated. BTW:
Playing the songs from the iPod is perfect. Laptop is a Pentium 4 with lots of space, speed and room for growth.

ebiggs1 wrote:
"I was trying to do a borderless print from either LR 5.X or PS CC, forget which right now."
I would bet it was LR. LR print settings are confusing but you should have no problem with PS. However, LR will do what you want without any add-ins like EPP. How versed are you in the use of LR? You probably need to bone up on how to set it up to print. Are you going to 'Page Setup' on the left side of the screen first? You should.
Moderately capable with LR. However, haven't printed that much. I remember having some trouble with
it when I last tried.
I'll mess with it in the next couple of days and see how it goes. I'll also try to read up on it at the same time.
Thanks.

Similar Messages

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

Although I gave up investment tracking for personal reasons (I had used Quicken Deluxe 2002 for many years for that reason), my understanding is that the new Quicken 2007 for Lion/Mt. Lion is completely the same feature wise as Quicken 2007 for PPC. It will run on Snow Leopard, too.
For $15, why not download it and just try it and LET US KNOW!

Has anyone successfully used the ZTE Open C with an AT&T microcell?

I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.

I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
Check the Microcell settings.
Check the data connection settings on your FxOS device
Make sure your Microcell is properly connected to WiFi
and check the AT&T support page for more info
For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D

Has anyone successfully used the Zoom R16 with Audition?

I’ve tried just about everything, but can’t seem to get Audition to run with the Zoom R16. As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously.
Has anyone had success getting the 2 to work together? If so, what’s the trick?!
Thanks in advance
C

CharlestonPro wrote:
As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously.
I'm intrigued - what is actually disharmonious?

Has anyone successfully implemented the JSF Viewer with Facelets?

We have recently started integrating Crystal into one of our web apps that is using JSF + Facelets + Seam.
I've built a taglib for the jsf viewer and configured it in web.xml and faces-config. I'm pulling an IReportSource from a backing bean using com.crystaldecisions.reports.sdk.ReportClientDocument and that is using a .rpt file stored on a directory. This all seems to be working, as I can step through the code and see the IReportSource being generated.
However, when the page loads, I am seeing the crystal javascript being converted in the page source, but nothing is loading on the page.
Has anyone seen an issue similar to this tied to Facelets? I've seen numerous documentation on Crystal and JSP, but very little on JSF or Facelets.
Has anyone been able to get a setup like this or similar to work properly?
I've also noticed an error when adding the viewer:
java.io.IOException: Recover report client document state failed.
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.readExternal(SourceFile:1492)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.readExternal(SourceFile:131)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
I believe this to be related to me switching over to the serializable ReportClientDocument: com.crystaldecisions.sdk.occa.report.application.ReportClientDocument versus using the nonserializable version.
When using the non-serializable version, I am seeing a constructor issue with the JPEReportSource
Exception: java.io.InvalidClassException: com.crystaldecisions.reports.reportengineinterface.JPEReportSource; no valid constructor
Has anyone seen this issue before or able to offer any suggestions?

Well, according to the tutorials I have seen on the internet, I believe CrystalReport was successfully implemented and tested with jsp, to have it working with Facelets, we need to do a little bit of work around. We need to make a new JSF custom component and assign it to an external renderer. then we can use it to view the report
please follow these and it should work after then,
1- bring the following jars into your libs
commons-configuration-1.2.jar
Concurrent.jar
CrystalCommon.jar
CrystalContentModels.jar
CrystalDatabaseConnectors.jar
CrystalFormulas.jar
CrystalQueryEngine.jar
CrystalReportEngine.jar
CrystalReportingCommon.jar
icu4j.jar
jrcadapter.jar
jrcerom.jar
keycodeDecoder.jar
MetafileRenderer.jar
rasapp.jar
rascore.jar
rpoifs.jar
serialization.jar
URIUtil.jar
webreporting.jar
webreporting-jsf.jar
xercesImpl.jar
xml-apis.jar
2- bring the folder "crystalreportviewers115" right under the "WebContent".
3- implement the custom FacesComponent and make it extend the "UIReportPageViewer" as follows;
import packagename.CustomReportRenderer;
@FacesComponent ("packagename.newReportViewer")
public class UIReportViewer extends com.crystaldecisions.report.web.jsf.UIReportPageViewer implements Serializable{
    public UIReportViewer () {
        this.setRendererType("packagename.CustomReportRenderer");
4- implement the renderer and make it extend the "ViewerHtmlRenderer" as follows;
@FacesRenderer(componentFamily="CrystalReports.DHTMLViewer", rendererType="packagename.CustomReportRenderer")
public class CustomReportRenderer extends com.crystaldecisions.report.web.jsf.ViewerHtmlRenderer implements Serializable {
5- make a new tag library xml file next to the web.xml so the application can find the tag configurations. name it "taglib.xml" and add the following inside it;
<facelet-taglib xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee"
    version="2.0">
    <namespace>http://new-jsf-custom-components/</namespace>
    <tag>
        <tag-name>ReportViewer</tag-name>
        <component>
            <component-type>packagename.newReportViewer</component-type>
            <renderer-type>packagename.CustomReportRenderer</renderer-type>
        </component>
    </tag>
</facelet-taglib>
6- configure the web.xml with the following
<context-param>
        <description>
        State saving method: 'client' or 'server' (=default). See JSF Specification 2.5.2</description>
        <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
        <param-value>server</param-value>
    </context-param>
    <context-param>
          <param-name>javax.faces.FACELETS_LIBRARIES</param-name>
        <param-value>/WEB-INF/taglib.xml</param-value>
    </context-param>
    <context-param>
        <param-name>crystal_image_uri</param-name>
        <param-value>../../crystalreportviewers115</param-value>
    </context-param>
7- implement the reportViewer.xhtml and make sure you have the following;
- in the tag libraries add the namespace schema xmlns:crystalnmcps="http://new-jsf-custom-components/"
- add the new reportViewer component
<crystalnmcps:ReportViewer reportSource="#{youController.reportSource}" displayToolbarLogo="false" parameterFields="#{youController.parameterFields}" allowParameterPrompting="false" />
Now run your app.
I hope this helps. good luck

Has anyone really solved the "Media server unexpectedly quit" error?

I've seen many posts and suggested solutions, but no definitive solution. This is a severe problem for Final Cut Pro, and it's presently keeping me from doing any kind of work with this software.
Thanks for any help on this!!
Greg

I've seen many posts and suggested solutions, but no
definitive solution. This is a severe problem for
Final Cut Pro, and it's presently keeping me from
doing any kind of work with this software.
Thanks for any help on this!!
Greg
Greg,
This solved the problem for me.
"In Compressor, if the "Video Format" is set to "Automatic", Batch Monitor fails (with the "Media Server unexpectedly quit" error).
changing the Video Format to NTSC and the frame rate to 29.97 (but leaving the Field Dominance on Automatic), the job submits and processes fine."
Make Video Format PAL and the frame rate 25, if working with PAL sources.
Good luck,
Luc
Mac OS X (10.4.6)

HAs anyone successfully loaded the Easy Photo Print Pro plug-in into Photoshop CC? If so, how?

I've tried to load it several times and keep getting a message saying the a compatible version of Photoshop has not been loaded. I've seen this question elsewhere, but without any answers. Does anyone know 1. If the two programs are incompatible, 2. If so, is either Canon or Adobe planning to make them compatible?
Solved!
Go to Solution.

ebiggs1 wrote:
"I was trying to do a borderless print from either LR 5.X or PS CC, forget which right now."
I would bet it was LR. LR print settings are confusing but you should have no problem with PS. However, LR will do what you want without any add-ins like EPP. How versed are you in the use of LR? You probably need to bone up on how to set it up to print. Are you going to 'Page Setup' on the left side of the screen first? You should.
Moderately capable with LR. However, haven't printed that much. I remember having some trouble with
it when I last tried.
I'll mess with it in the next couple of days and see how it goes. I'll also try to read up on it at the same time.
Thanks.

Has anyone ever solved the OID problem on redhat 8

I have noted the OID assistant failing on RedHat 8 problem discussed in a number of threads in this forum but haven't seen anyone with a clear solution. Her is how far I have gotten.
[oracle@dev1 bin]$ ../ldap/bin/ldapcheck
Checking Oracle Internet Directory Processes ...
Process oidmon is Alive as PID 9642
Process oidldapd is Alive as PID 9648
Process oidldapd is Alive as PID 9660
Not Running ---- Process oidrepld
[oracle@dev1 bin]$ ldapbind -h dev1.associatedlabs.com -p
389 -D cn=orcladmin -w adminpwd
bind successful
[oracle@dev1 bin]$ odisrvreg -h dev1.associatedlabs.com -p
389 -D "cn=orcladmin" -w adminpwd
Enter DIS password :*
Confirm DIS password :*
Registering for the first time...
Error in creating registration
entry...javax.naming.directory.InvalidAttributeIdentifierException:
[LDAP: error code 17 - Attribute orclversion is not
supported in schema.]; remaining name
'cn=odisrv+orclhostname=dev1.associatedlabs.com,cn=odi,cn=oracle
internet directory'
[oracle@dev1 bin]$
Have wasted alot of time here. Should I just go to SUSE, or back to SUN. Thanks for your help.

There has been a lot of that lately, try following the instructions of tt2 in https://discussions.apple.com/thread/5822086 to fix it.

Has anyone successfully downloaded the latest 2.40-WIN BIOS for the P100-188?

The reason I ask is because when I try to download the file it keeps coming up empty, I'm not comfortable with updating using the traditional method, as it seems more things can go wrong during the process, and Toshiba recommends using the windows method anyway.
I don't understand it, the graphics driver they have listed as the latest version for my machine is 8.3.2.0, the one on my machine is 8.4.0.0, numbering convention states the version I have installed is the latest, so how come the 8.3 version is listed?
Plus when you download a new driver or BIOS they don't give any details on what issues the update fixes or addresses, are they hiding this information from us or just assuming we're all psychic?
Now they seem to be posting blank files as well, I know we are all human and we all make mistakes but is anybody working for this website paying attention? I sent an email to ForumModeration on the 17th of October about not being able to post as it was coming up as "profanity or inappropriate language" even though the offending piece of text was a link to a web page! 9 days later I'm still waiting on an answer, or even an acknowledgement.
I'm sorry for ranting on a bit but I can't help feeling it would be easier to get blood from a stone than a information from anyone.

Hi
Strange. View min ago I have tried to download the BIOS 2.4WIN but I was not able to unzip this folder. I think there must be a zip error. Possibly it will be fixed in the netx couple of days. Lets hope
Anyway, I have also looked for some additional information about BIOS update and release details but it seems there are no further informations about BIOS changes.
But if you click on the option more info to the right of every update you will find some descriptions. You will also find Toshiba BIOS-Update Description.
I think you should read this document before starting any BIOS updates.
I get also the profanity or inappropriate language message and I assume it happens because of the word filtering which check the message before it will be post in the forum.
Sometimes its a little bit annoying because I have to change the text but I can live with them. B-) be cool

Has anyone successfully used the serial-over-lan feature in ipmitool?

The IPMI hardware in Apple's Intel Xserves ostensibly supports serial-over-LAN access via ipmitool. Attempting to access it with ipmitool doesn't appear to work, however; the command
ipmitool -H hostname -U username sol activate
simply returns without entering a serial session. I am able to perform other queries on the same interface with ipmitool, however. Is there some setting that I must enable in order to permit the above command to succeed?

I have version 2.0.2 installed. The firmware is not up to date (its boot ROM is at version XS11.0080.B01); however, I never was able to figure out how to update it (see http://discussions.apple.com/thread.jspa?threadID=1569860&tstart=0). Querying the bmc info with ipmitool does work; it reports firmware revision 1.2.8. No manual changes were made within /dev to my knowledge.

OVD 10.1.4.2 - anyone successfully installed the patch on Windows?

I have OVD 10.1.4.0.1 installed on the WinXP machine in front of me.
I've tried to install the 10.1.4.2 patch/upgrade, but it just bombs out with a fatal windows exception reported in setup.exe (although the command line reports an AttachHome error, see below).
NB; this machine never had OUI installed before (OVD 10.1.4.0.1 didn't use it). I've since added OUI, but the error continues.
The only mention in metalink is Note:565514.1 Patch 10.1.4.2 Fails to Apply with 'AttachHome' failed .But this does not properly describe or address the error I am seeing.
Has anyone successfully installed the 10.1.4.2 patch for OVD?
Regards,
Paul
D:\sources\incoming\www.oracle.com\OracleAS\Identity Management\OVD\p5983640_101420_WINNT\Disk1>OVD10142_Server.exe D:\Oracle\OViD O
ViD
Created the D:\Oracle\OViD\inventory\ContentsXML\comps.xml file successfully
AttachHome Failed.Oracle Home already exists at this location. Select another location.

Thanks for the suggestion Kiran, but it doesn't help.
In fact the D:\Oracle\OViD\inventory\ContentsXML\comps.xml file is created by the patch, and doesn't contain any home information.
I'm thinking the 'AttachHome' is a red herring. The forked setup.exe process is actually crashing with an exception, and it is the parent process (OVD10142_Server.exe) that seems to be interpreting this as an 'AttachHome' failure.
I've given up on this - word I got from Oracle is to wait for the 10.1.4.3 patch which should be out soon.
But I'm still interested - has anyone installed the 10.1.4.2 patch on Windows? [Kiran - you didn't explicitly say whether you had]

Has anyone else experienced the stopping and starting again while playing music in iTunes. It was fixed but with the last update it has started skipping again.

Has anyone else experienced the stopping and starting again whil playing music in itunes. It was working fine wit the prior fix, but after the last update
it started skipping again.

Try it in another vehicle see if it still happens, at least you can narrow it down to your phone or the car. My 4s play totally fine, I have never had any of those issues. Maybe its time to restore your phone and start over. I would also have someone else play their Iphone in your car, see if it happens to them. Or try yours in someone elses car. Good Luck!

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. Thanks.

Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi? If so, please describe the requirements and process. (TV subscription is through DirecTV and ISP is TWC.) Thanks.

If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
Regards.

I am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeeded on the same platform as me?

i am unable to manually add artwork via itunes 12 on windows 7. I've tried all the suggestions to no avail. Has anyone succeeded on the same platform as me?

The new iTunes 12 Get Info dialog lacks right-click context menus (at least for now) but it still accepts most standard keyboard shortcuts and drag & drop actions.
Delete Artwork
On the artwork tab of Get Into, tap the image in question, use Backspace or Ctrl+X. Delete doesn't work.
Or, tap the image at the top left of Get Info, this time use Backspace or Delete, it is Ctrl+X that doesn't work.
Add Artwork
Select artwork, press Ctrl+C to copy, tap the centre of the Artwork tab, press Ctrl+V to paste.
Or, select artwork, press Ctrl+C to copy, tap the small image area at the top left, press Ctrl+V to paste.
Or, you can drag & drop to, or sometimes from, the same locations.
You can also copy artwork from the Get Info dialog to Windows Explorer with the keyboard shortcuts.
If the source image is on a web page right-click and use Copy Image rather than copy. (With Chrome I get a one pixel wraparound so tend to go for a temporary local copy anyway - not sure whose bug this is, but it isn't new.)
If you have multiple images embedded drag the one you want to be the primary artwork to the leftmost position.
Replace/Remove All Artwork
The top left image box can be used to add or delete art from multiple tracks. In either case all existing artwork in all tracks is replaced/removed.
Old Style Get Info Dialog
Select some items, right-click, hold down shift, then click Get Info from the context menu. (Use alt/option on a Mac)
If you still cannot add artwork via any of these methods then I would suspect a permissions problem. See Repair security permissions for iTunes for Windows.
tt2

3 year old iMac 24 running OS10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem?

3 year old iMac 24 running OS 10.7.4. After it has been on for a day or so, it stops going to sleep and becomes very slow. This only happens when Safari is running. Quitting Safari solves the problem. Has anyone else have the same problem? Does not happen on MacBookpro only on iMac.

Hello Albert, see how many of these you can answer...
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab, are there a lot of Pageouts?

Has anyone successfully solved the distorted playback (itune

Similar Messages

Maybe you are looking for