Has anyone successfully used OSX Lion with Logic 8, a Digi002 and Digidesign's Coreaudio?  Need to know for iCloud update.

I need to upgrade to Lion for iCloud and to shift my mobile me iDisk to iCloud in order to save the content I have and need to share.
Anyone using Logic 8 with this?  I want to be sure, as I can't afford to upgrade everthing just yet.
Thanks

I can give a partial answer.
If you're installing Lion over the top of Snow Leopard Logic should be fine, it you're going to run a clean install of Lion, Logic 8 will not install but will run if you can copy it over from a working SL install.
Update: This thread has info on how to install Logic 8 on a clean install of Lion.
https://discussions.apple.com/message/18270040#18270040
The other issue are Digi's Core Audio MIDI drivers, they don't seem to be Lion compatible yet so while you may have the audio part of the interface working with Lion, you have to remove the MIDI drivers or Logic chokes while booting up. (unless there are new drivers I don't know about) Perhaps others have more info on the Digi situation.

Similar Messages

  • Has anyone successfully used the ZTE Open C with an AT&T microcell?

    I have a ZTE Open C and have had no issues with initial setup w/AT&T. However, like most newer phones the voice signal reception is very weak.
    I've had an AT&T Microcell before, but I don't have one now. For those that are unaware, the microcell allows 3G phones to connect via a 3G signal, but the call is routed through a home broadband internet connection.
    Has anyone successfully used a ZTE Open C w/Firefox OS AND used an AT&T microcell? If yes, did you need to do anything special on the phone or with Firefox OS.

    I don't use a ZTE Open C, however, I do have a ZTE Open (Original) on AT&T and so I'll see if I can help ;D
    I know someone who has a Microcell, and I have used it myself a few times. However, the microcell only works if you have entered in your phone number into settings of the Microcell.
    Check the Microcell settings.
    Check the data connection settings on your FxOS device
    Make sure your Microcell is properly connected to WiFi
    and check the AT&T support page for more info
    For a while, it actually hasn't actually worked for me. I apologize if this doesn't solve your problem :D

  • Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

    Has anyone successfully used the Intuit Quicken compatible with Lion upgrade for investment tracking?

    Although I gave up investment tracking for personal reasons (I had used Quicken Deluxe 2002 for many years for that reason), my understanding is that the new Quicken 2007 for Lion/Mt. Lion is completely the same feature wise as Quicken 2007 for PPC.  It will run on Snow Leopard, too.
    For $15, why not download it and just try it and LET US KNOW!

  • Has anyone successfully used Oracle EM as a Monitoring Solution??

    Hi All,
    This might be a wrong place to post ;) but anyways. My question is can we use Oracle EM as a Monitoring Solution? If so has anyone successfully used it?
    I have used Oracle EM over the years for mostly managing Databases. Eventually with the Middleware Support I have tried to use it to monitor Middleware Servers, earlier OC4J and recently WebLogic Servers. I however find that most people when talk about EM they think of it as a Business Transaction Monitoring Solution. (Lets keep BTM out for a while I know about that plugin but it is another full set of questions)
    Mostly I get questions as to can we "drill down the transactions" and see who initiated it and "what is being processed at this moment". Here transaction means Business Transaction as opposed "this thread is executing this particular piece of code". People want to know this piece of code is being executed "for Purchase Order XYZ" as opposed to just knowing that purchase order is being processed. If you know what i mean.
    No doubt OEM is great tool for an Admin but does it really sell itself as a monitoring solution? I have not seen a successful implementation so far with OEM being a central monitoring solution. If anyone has any experiences to share it would be great.

    I tried to look at that option. It is available only for the Database. I was looking something more towards say the web Services hosted or the Web Applications hosted on Weblogic instances. Can we find say the Web Service call which had the Purchase Order XYZ in its request, etc.

  • Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive?

    Has anyone successfully used a "WD My Book for Mac" via NAS (plugged into USB port on router) as a Time Machine back-up drive? Apple support tech tried to tell me it wasn't possible and that the only NAS Time Machine could back up to is the Time Capsule, but I'm not buying it. I know it's doable, but I'm having a hard time figuring out which External HDDs will work and which ones won't.  If not My Book for Mac, is there an External HDD that will work? (Running OS X 10.9.1 - Mavericks, btw...)

    Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
    The exhaustive list of devices supported by Time Machine amounts to the following:
    AirPort Time Capsule's built-in hard disk (any model)
    External USB hard disk drive connected to a Time Capsule (any model)
    External USB hard disk drive connected to an AirPort Extreme (current model only)
    A hard disk drive directly connected to your Mac
    That is all.
    Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

  • Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

    Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

    If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

  • Has anyone successfully used the Zoom R16 with Audition?

    I’ve tried just about everything, but can’t seem to get Audition to run with the Zoom R16.  As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously. 
    Has anyone had success getting the 2 to work together?  If so, what’s the trick?!
    Thanks in advance
    C

    CharlestonPro wrote:
    As noted in a recent post, I updated both the Zoom R16 firmware and widows driver, but that doesn’t seem to make the 2 work harmoniously.
    I'm intrigued - what is actually disharmonious?

  • Has anyone actually used PS CS6 with the new Macbook pro?

    There has been an awful lot of discussion about how the new macbook will work with CS6, mostly talk about the UI, but has anyone used it?  How does it work with the retina display (other than the UI)?  Yes, Adobe is going to make it retina compatible and we don't know if they will charge for the upgrade or not.  But I'd like feedback from someone who is using the new Macbook pro with CS6.
    Thanks!

    Thanks.  I have scoured the forums and nobody has used it - or if anyone has, they haven't said squat.  Anyway, I took the plunge, downloaded the app and it is absolutely stunning on my rMBP.  Even though, as you say, it is at the pixel representation I've always had.  I can't wait until the update and full retina representation.
    It is fast as blazes, sharp as a tack.  A beautiful thing.  I'll play with it some more to see how it performs.  But so far with some short tests, the rendering is almost instantanious and the colors are brilliant. 
    So far, so good.

  • Has anyone successfully used multiple page orientations in a CR2008 report?

    Hi -- I posted about this a couple of days ago:
       Unwanted blank pages using multiple page orientations in CR 2008
    I have a report with multiple subreports, each 1 page long, and some of which need to use landscape
    orientation (most are portrait). Thanks to the forum, I learned that this is possible in CR2008.
    Each subreport is in a report footer section. So, for the subreports that need to be landscape,
    I use the section expert for that footer, Paging tab, and set it to landscape. I DO NOT
    check New Page Before and New Page After -- but I get them anyway. There's a blank page
    before the landscape page -- portrait orientation. There's a blank page after the landscape
    page -- landscape orientation. In addition to being ugly, the blank pages mess up the page numbers that
    need to be associated w/ each subreport.
    I've checked the Report Footers before and after the footer for the landscape subreport.. neither of them have
    New Page Before or New Page After checked.
    I'm hoping to generate more interest/discussion w/ this post, and I also have some additional
    information.
    1) The "blank" pages that appear before and after the landscape page seem to be duplicates of the previous section.
    That is, subreport 3 is in page footer c (portrait). Its results correctly appear on page 3, but page 4, which appears
    blank, is also page footer c and shows the subreport object included -- but with no data.
    The subreport in page footer section d (landscape) appears on page 5 (it should be on 4). Page 6 appears blank,
    but it is also page footer section d and shows the subreport object included.
    If I change page footer c to landscape, all the "blank" pages go away (though subreport c takes up 2 pages because
    it's too long for a landscape page). So, from that perspective, having successive pages w/ the non-default
    orientation seemed to help...
    Is there some trick to using multiple page orientations in a report that I'm not aware of? Can someone describe
    an example where they were successful?
    Maybe tech support will be the way to go, but I'd like to think that someone out there has worked w/ this feature!
    Thanks much,
    Carol

    Please don't post the same question multiple times

  • Has anyone successfully used CarPlay?

    I have a 2014 Honda Civic and was told by dealer that once Apple released most recent iOS, the UI would be compatible with CarPlay as seen on apple.com/ios/carplay pictures & other blogs. However, when I connect it with cable it does not change UI from HondaLink to CarPLay. Does anyone know how to successfully link iPhone in car using CarPlay or do I need something from Honda (firmware update, etc.)?

    Honda needs to support CarPlay and as of now they don't.

  • Is anyone successfully using Netgear WN3000RP with Airport Extreme?

    Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
    Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
    I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
    I'm using Airport Utility version 6.1.
    Can someone out there can let me know if they got this device working with their Airport Extreme?
    Also, what are my other options to extend my range?

    I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
    1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
    2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
    3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
    4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
    5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
    A Visual Representation would be
    ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
    In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
    An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
    Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

  • Is Anyone Successfully Using DNxHR CODEC with CS6

    Just downloaded the HR 4K CODEC today http://cdn.avid.com/Codecs/LE/2.6.0/CodecsLE_2.6.0_Win.zip
    Trying to do a test export, but it hangs at 0%.
    Anyone else try this yet?

    tested it in premiere 8.2, seems to work ok, but was slow as it was using quicktime 32 bit. was able to export and re-import the video back into premiere and it read it ok. not sure why it wouldn't work in cs6, do you have the latest version of quicktime installed?

  • Has anyone else had this problem with the iphone 4 dock and bumper?

    I purchased an iphone 4 dock and bumper but when ever I sit the iphone in the dock with the bumper on it won't get a sufficient enough connection to charge so I have to take the bumper off in order for it to charge.
    Has anyone else had this problem?

    Yes I am not impressed with that either. How can apple design such an accessory and then not have it compatable with another accessory of theirs!?
    The same goes for the in-car charger also. It's a good job the iphone 4 is so good, otherwise it would have been a return to Blackberry for me!

  • Has anybody else had the problem with the wifi option being greyed out? I need to know how to fix it??

    I recently updated my phone software to iOS 6.1.3 and for the first couple of weeks, it was ok. but then until monday, the option to turn on the wi-fi has been greyed out so I can't turn my phone's wi-fi on which means I have to keep using my 3G coverage which will eventually cost me a fortune if I don't get the wi-fi greyed out problem sorted out as soon as possible. If anybody could help me with this problem (without having to take it apart or putting it into the freezer) please let me know as soon as possible.
    Thanks
    alexmac92 x

    I have seen a few searches that indicate some people have had success by changing their wifi security settings.  Using none (not recommended) or using WPA2 with a strong pass phrase (longer than 8 characters) seems to work for everyone I've talked to.  I've not had this issue myself on any of my devices (2 iPhone 4, 2 iPhone 5, 2 iPad 2, all running iOS 6.1.3, and 2 iPod Touch 3rd Gen running iOS 5.1.1), but then again, my home wifi has had a strong pasphrase, and WPA2 for 7-8 years now.  I beleive that some people have had luck with performing a reset of network settings (but others have not, and claimed that it actually made things worse some how).  Some have had luck performing a device restore in iTunes, while others have claimed that did nothing but cause them to lose everything. 
    I know there is so much wifi congestion in my neighborhood that it is hard to find a channel that doesn't already have 2-3 routers using it.  It is possible that resetting your wifi router might help.  I know that when my iPhone wouldn't connect to my wireless network, it would usually clear up if I restarted the router.

  • Has anyone sucessfully used the new Winclone 3.2 to backup and restore  Bootcamp partittion with Windows 7 Ultimate on MBP with Lion 10.7.3?

    Bought late 2011 MBP 17" with Bootcamp partition (Windows 7 Ultimate) and Lion OS 10.7.3
    I am trying to make a backup of Bootcamp partition before I start using my laptop but it proves to be a difficult task.
    I don’t have any installation disk for Windows 7 and I am afraid that, if a disaster strikes and I loose the HDD, my copy of Windows will be gone. 
    The only way to restore Windows partition according to what I read so far is to do the following:
    • Use Windows to backup data from BootCamp Partition
    • Reinstall OS Lion formatting full hard drive in the process
    • Use BootCamp Assistant to create BootCamp partition
    • Install Windows 7 on bootcamp partion
    • Use Windows 7 to restore data from backup file created in the first step
    The only problem is that I don't any image or disk to re-install Windows 7. With Windows 7 I can create only 'repair disk' (for what it is worth) or system image but according to other users it would format the whole drive including OS Lion partition when reinstalling
    Winclone 3.2 seems like the answer to my prayers but would like to hear from the users if it worked for them (most imprtantly, did the restore work?). 

    Got the response from Winclone regarding my confusion in step 18 of the procedure to create bootcamp backup.  The message displayed on the screenshot under step 18 can be ignored.  It refers to creating a Windows partition using Boot Camp Assistant but in fact this partition has already been created in earlier steps using Disk Utility. 
    I bought Winclone 3.3 as it promises to make backup and restore of Bootcamp partition with Windows 7 on it really easy, the steps to do this task are easy and well documented, and the owner of the program was very prompt responding to my queries.
    I performed the following as an insurance against disaster prior to creating Winclone image:
    Since my Windows 7 came pre-installed but without any installation disk I used Windows 7 to create 'Windows 7 system image' . From what I read on forums the system image created using Windows 7 apparently can't be used to easily restore Boot Camp partition (as it wipes out OS X in the process).  I created this image as a last resort backup rescue - some users reported that it can be used to recover Windows but the process is painful and involve a number of steps, swapping hard drives, and paid software to assist in the process.  I did not bother to make notes on this process - thanks to Winclone I am not suppose to need this backup if everything works as promised
    I also created 'Windows 7 repair disk' prior to running Winclone.  Not sure what the value of it will be but again, this is something I did just in case I need it in the future
    Then I installed Winclone 3.3 and created Windows 7 Ultimate Boot Camp image without any problems (on MBP running Lion 10.7.4).  My Winclone image file of 150GB Windows 7 Boot Camp partition prior to installing any programs and without any data on it ended up being nearly 8GB (saved to the external USB HDD).
    I have not restored and don't plan to restore the Winclone 3.3 image just to test if it works (don't want to risk loosing my perfectly well running Windows 7 in case of any disaster).  So ultimately only time or experience of other users will tell me if I spent my money well buying Winclone 3.3.  I  know it worked for you JBLTZ so hopefully it will work for me when I need it one day.
    Cheers
    Swavek

Maybe you are looking for