Has anyone tethered a Kodak DCS to an intel Mac using Yosemite and Aperture 3.6

has anyone tethered a Kodak DCS to an intel Mac using Yosemite and Aperture 3.6

Hi stephenfromedinboro,
If you are looking for more information on tethered shooting in Aperture 3, you may find the following article useful:
Aperture 3: Tips on tethered shooting - Apple Podrška
Regards,
- Brenden

Similar Messages

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

After upgrading to Yosemite and Aperture 3.6 all the library icons are shown plain. Does anyone has a hint?

If it is still slow after removing Symantec, you may need a RAM upgrade. Yosemite can run very poorly on older machines with only 4 GB RAM.

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub

Has anyone successfully set up scan to smb to mac os 10.7.x from a Konica Minolta bizhub. I'm using 10.7.3 on MacBook Pro. Don't care what model bizhub is being used as I have access to many. I've seen the posts for FTP workarounds but want to use SMB if that is an option. Any suggestions? Thank you!

petermtnbk wrote:
I've read other discussions that have suggested changing the format of the username and password when having login problems. I'm not familiar with NT-Status Codes. Could changing the format of the username make any difference? Something like... "workgroup/username" or "username@domain" or "domain/username" or some other combination of workgroup, domain, username, computername.
The issue has nothing to do with the format of the user authentication. What you are reading is about the Lion Mac connecting to a Windows computer that is part of domain or workgroup. The method changed slightly compared to Snow Leopard.
KM does support FTP so that is still an option, but I would ideally would like to set up SMB scanning. I'm not sure if KM is going to support AFP anytime soon.
With the lack of SMB support and KM offering no alternative at this stage then I suggest you look at using FTP. While Lion removed the option to enable FTP via the Sharing pane in System Preferences, it can still be enabled via Terminal using the following command
sudo -s launchctl load -w /System/Library/LaunchDaemons/ftp.plist
You will be prompted to authenticate using your Mac's admin account & password. Once this is done, you can then configure the address on the copier to push scan using FTP. The keys are;
The host name requires just the IP address. No leading slashes like SMB
The path will be the folder that you want to scan to, also entered without a leading slash. For example, Desktop
The user name will be the short name of the account who's folder you want to scan to.
The only other option may be WebDAV if the KM supports it. We have this with our imageRUNNER ADVANCE and with a document scanned to a shared folder in the copier hard drive, we can then connect to that folder by using Finder's > Go > Connect to Server facility. You then just enter
http://ipaddress/share
which connects you to the shared folder and lets you see the document you scanned. You also have the facility to set subfolders for security of users documents.

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks?

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks? I have finally given up on Dragon Dictate for Mac, which alas, after years of buying every new updated version, is still exceedingly buggy and does not begin to compare in quality to the PC version. I love my Mac, and don't like my PC at all, but the third-party voice dictation software for Mac is so pathetic, that I have wound up dictating on my PC, and then sending it to my Mac: an truly annoying and Baroque process. I was able to train over 120 words in Sanskrit word perfect on Dragon NaturallySpeaking, but on Dragon Dictate for Mac, I can't even get it to train my name. I know this is not an Apple problem, but I'm trying to find a way around by possibly running the DNS version on Windows on my iMac.
I have a hand disability, so I really do need to use voice dictation, both for dictating and navigating on my computer.
If anyone is doing this, are you using Boot Camp, VM fusion, or Parallels? How well does it work? Has anyone discovered anything else I ought to be considering, before giving this a try? I had tried running this on an old on 2008 iMac (with much less power), using Parallels, but it was incredibly slow. Now that I have a much more powerful iMac, I'm wondering whether it would be worth another try. As it will be quite an investment to purchase all this third-party software to get Dragon up and running, I was hoping to get a sense of how well it works, before plunking down the cash. I would be extremely grateful for helpful feedback.
IMac, Mavericks OS X 10.9.4, 3.5 GHz Intel core i 7, 8 GB 1600 MHz DD3, Dragon NaturallySpeaking 12, Dragon Dictate 4.0.2

You cannot run a Windows application on a Mac unless you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Has anyone received an update on apple tv issue with HD movies and what they are doing about it

Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Has anyone ran into the problem of having an old apple id and now can't download any past purchases

Has anyone ran into the problem of having an old apple id and now can't download any past purchases

Go to settings/itunes & app store and logout of your new ID and log in with the old, then try looking for past purchases again

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

I have an iphone 5s and i just got the 7.0.4 update. Now i don't have the option to have a fingerprint scanner. Has anyone had this same problem? If so, why is that and what did you do about it?

Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

Since the ios7 update has anyone lost ability to charge phone with external battery back! And is there going to be an update to correct this?

Modular747 is a troll with very little real knowledge of the iPhone charging systems (as evidenced by his uninformed comments in other threads).
It could very well be iOS 7 refusing to charge from "non-authorized" accessories. We have done A/B tests with the same accessory (in this case cables) with iOS6 and iOS7 and have seen the cable work with iOS6, then not work (i.e. not charge) with iOS 7. Same device, same cable. Only change was the OS.
Keep the pressure on Apple, folks. It is not OK to make working accessories unusable with a software update.

Has anyone ever had a problem with their iphone 4 not syncing and/or writing a backup file?

Has anyone ever had a problem with their iphone 4 not syncing and/or writing a backup file? Itunes locks up when i attempt a sync as well as when I transfer my purchases from my phone to Itunes. I'm running Itunes 10.4.1 on iOS 4.3.5. All of this is running on an 8 year old hp pavillian laptop running XP Pro that is fully updated. Could my phone have a bug or a hardware problem. Are there any known problems with iOS 4.3.5? Pretty frustrating problem so I'm hoping that someone has heard of this and can offer some suggestions on a solution. Thanks a bunch.

Did you used to have service and now suddenly you don't?
This happened to me a few years back, and several other iPhone users in my neighborhood, and after a while on the phone with AT&T they figured out that a technician had recently adjusted the receiver/sender on the tower and it was slightly off. They sent them back up and I actually had a better signal after than I did before it went out.
I would call AT&T and explain the issue you are having and see if they can fix it.
If you never had service there then like wjosten said it's probably just a bad zone.
Hope you get it sussed out.
-PM

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

I recently upgraded my Mac to Yosemite and I can't use the custom function (grayed out) in Image Trace Illustrator CS6 (physical version). Anyone else having this issue?

Custom will show automatically as soon as you just edit some options. So just go ahead, you don't need to select "custom"

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

I have got Acrobat 10.1.13 for Mac running Yosemite - and the 'advanced search' feature has stopped functioning - it doesn't install the search window, nothing happens - so I uninstalled acrobat, reinstalled it - but it still not working?

It's a 3rd party app. You really should contact Adobe Support and/or post in the Adobe Forums
Mac OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

Has anyone ued a pnm2ppa driver in an Intel iMac?

I can use my old HP 722C printer in the XP partition of my new Intel iMac, but even though the iMac System Profiler recognizes that I have an IEEE-1284 USB cable attached to a 720C series printer, the printer will not print in the OS X partition.
A search found a pnm2ppa driver that is supposed to work with Mac OS X. Has anyone had any experience with this driver on an >Intel< iMac?

This install is not for the faint of heart.

Has anyone tried to build a better blog on BC using WebApps only?

In the past I have considered trying to get around some of the limitations of the BC blog system by using WebApps but felt wasn't really possible without a lot of hacks and work-arounds.
But now we have some recent upgrades to BC that have me thinking about it again. Now we have modules-within-modules and, more recently, custom template paths within modules.
Has anyone else ever tried in the past? Is anyone thinking about doing it now with these upgrades? I have had customers in the past come to me with wanting to do blogs but their requested functionality was just too far beyond what BC offers in the blog system. I'd like to see what other partners think about this...
Curtiss
@bcfanboy

Hi there. There are key features to the blog and key lacking features to web apps. The blog is better then people think if you build it up right too.
The new web app engine out next year will allow you to build what you want like a blog.

TS1424 has anyone not been able to get the installer to properly load and get a message like: This installer is intended for 32 bit versions of windows. Please download and install 64 bit iTuines installer instead? and even if you uninstall and reinstall

Has anyone not been able to get the iTunes installer to load properly and get a message like this: This iTunes installer is intended for 32 bit versions of windows. Please download and install 64 bit iTunes installer instead. I have tried repeatedly to get this to load, I have uninstalled iTunes completely and reinstalled and still get the same message. I have windows XP and a brand new ipod touch which I am trying to load.

Yes, it's come up a number of times. If you look to the right under "more like this", you'll find threads that may offer useful suggestions.
Regards.

Has anyone experienced invisible folders after update to iOS 8.1.2 and subsequent restore from backup on an iPhone 5?

It's apparent that a folder that was visible on my iPhone 5 while running iOS 8.1.1, is no longer visible after an update and restore on iOS 8.1.2. The folder had several apps I used regularly. They must be on the phone, because after initiating a 'Spotlight Search' for apps in they now invisible folder, the appear listed in the results.
Has anyone had this occur on their phone after an upgrade to the new iOS version? Is there anyone that can suggest at 'fix' or should i just try to restore again?
Thanks In Advance,
Fabian

So you have checked all of the home screens and the folder does not exist? I've not witnessed hidden folders. Try a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone reboots, see if you can locate it. If not, then you can go to Settings>General>Reset>Reset Home Screen Layout. This should remove all apps from folders and reset your home screens.

Has anyone tethered a Kodak DCS to an intel Mac using Yosemite and Aperture 3.6

Similar Messages

Maybe you are looking for