Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro?
Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro? I've read that you could go as high as 3GB with no problems although not supported. With the prices of HDD's dropping, I'd like to add more storage to my system, either internally of externally, but I'd like to get a couple of 4GB drives, and was wondering if anyone has used that combination with a Mid 2010 Mac Pro 8 core.
Drives as large as 16TB are directly supported in Mac OS X and behave well when formatted with GUID partition Table -- the default after 10.4.4.
There is a Bug in the Erase function in Disk Utility from 10.8.4, that is unresolved at this writing. Drives over 2.2TB, once erased with this software as an Internal Drive, the drive cannot be further partitioned or erased by that same software. A fix in 10.9.3 or later is anticipated, but not guaranteed. Older versions work fine. External enclosures with Large Drive support work fine.
Western Digital in particular (and others may soon follow) has also shortened the depth of the mounting holes on certain large drives -- the holes adjacent to the platters -- to allow for the addition of an extra platter on certain large drives. A washer may be required to reduce the effective length the drive mounting screw penetrates into the drive.
Similar Messages
-
A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl
Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl -
Has anyone tried to use the Online Edition of Quickbooks and Tiger?
I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong -
Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG -
Has anyone tried pre-compression to improve image quality?
I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
MikeWhat you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around -
Has anyone tried Displayport to VGA adaptor for T410S?
I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010 -
Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?
I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?
Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.
-
Has anyone tried home sharing between mac and windows using parallels on the same machine?
I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!
In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.
-
Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat
Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistinathere are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive! -
Post Author: Horizon57
CA Forum: General
Has anyone tried creating sections in a Crystal Report where analytic comments (or any sort of text) is fed in from a database. I am trying to build a report where users have entered comments (into an Access database) to accompany the charts and graphs on a report.
The main idea is to have these comments auto populate in the report when it is run just like the rest of the data fields.
Does anyone have experience with anything similar to this?
MikePost Author: V361
CA Forum: General
You can insert a section in a group (it will insert below whatever is already there), then drag the field into the report, select can grow, and see what you get..... -
Has anyone tried disabling DART?
Has anyone tried disabling DART in the boot-args on an XSERVE running Tiger with 2GB RAM? Are there any effects on the PCI cards, except the obvious?
RogerGreat!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you -
Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?
I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.
It worked, for about $860 I now have a 1.8 TB xServer
-
Has anyone tried to extend Spatial with a 3D primitive?
Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...
The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work. -
Has anyone tried a 3rd party laptop cooling pad?
I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?
I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6) -
Has anyone tried a *real* role-link ? - (bea support pls respond)
Hi
Has anyone tried using different role-name and role-link in the security-role-ref section of web.xml.
isUserInRole method fails with this.
given a section in web.xml as:
<security-role-ref>
<role-name>xyz</role-name>
<role-link>abc</role-link>
</security-role-ref>
<security-role>
<role-name>abc</role-name>
</security-role>
u would say isUserInRole("xyz"); right?
but weblogic 5.1 always returns false
it instead behaves properly with isUserInRole("xyz"); which is wrong behaviour.
Please correct me if i am wrong.
thanks
sriramI don't have a definitive answer, but I would guess you won't find a tech support service dedicated to the Flash Player since it is free software and customers apparently have problems getting tech support for the products they buy. But here are a couple of things worth considering.
Try posting/looking thru the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player
Try submitting a bug report...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Maybe you are looking for
-
Name Space in Webservice Response is not parsed in BI Publisher
Hi, I have built the report in BI Publisher with Data Source as Web Service by giving WSDL URL and method Name. I have got the response for the method call, but it has name space for all tag elements. Like <ns:FirstName>Daniel</ns:FirstName> <ns:Last
-
Error while transporting Planning board profiles from Dev to QA
Hi All, I have created planning board profile by copying an already existing Non-Standard profile. The Profile is working fine in Dev and i am able to see all the charts and Graphical objects as per the settings in the profile. But when i transport t
-
Dear all please help me ....
-
[SOLVED]Mutt - abook problem - losing information
I've experienced the problem seen by others with abook losing information, but I have not seen any clear solutions. I'm using mutt from extra, compiled via abs with the sidebar patch. It appears that the data loss happens when you have existing phone
-
Copy Layout from FBL3N to FAGLL03
Hi, There are "N" numbers of user specific layouts created by the users in the transaction code FBL3N. I would like to know if there is any process of copying these Layout from FBL3N to FAGLL03. Regards, Dhruv