Has anyone tried any of these coolers?

And if you did, which one fit the best on the K8T Neo FIS2R?
http://www.tomshardware.com/2005/06/07/10_mammoth_cpu_coolers/

i have a K8T and use the zalman cnps7700
http://www.tomshardware.com/2005/06/07/10_mammoth_cpu_coolers/page15.html
if you're running 2 stick of ram in dual, the stick closest to the cpu socket is a very tight fit if you add the ram after the cooler but it's a great cooler IMO
my load temps hover around 42C that's with a 3200 venice @ 2.6 with the fan running @ 1200rpm .. nice and quiet

Similar Messages

Has anyone tried any of the ihealth accessories?

I was looking at some of the ihealth accessories, but don't know how good they are. I don't want to spend money on things that are not good quality. Has anyone used any of the ihealth accessories?

i have a K8T and use the zalman cnps7700
http://www.tomshardware.com/2005/06/07/10_mammoth_cpu_coolers/page15.html
if you're running 2 stick of ram in dual, the stick closest to the cpu socket is a very tight fit if you add the ram after the cooler but it's a great cooler IMO
my load temps hover around 42C that's with a 3200 venice @ 2.6 with the fan running @ 1200rpm .. nice and quiet

Has anyone tried one of these $40 eBay batteries...

...found this on eBay. Price sounds good but we all know what that usually means:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220396594649
Has anyone tried one?
-Alan

While the ad says "new in box", that box may well have been sitting on a shelf for more then 5 years. And if so, it's worthless. LiOH batterys begin to decay from internal self-oxidation the minute they are assembled. Even just sitting idle on a shelf, under perfect environmental conditions, they will only last for 4-7 years, after which, their capacity to hold a charge is pretty much shot.

Has anyone used any of these programs to create a floor plan for a retail store?

When they sold me the package they said Ai would work well, I have looked at it but can't seem to find any templates to use..

I use a CAD program that was designed to work with Ai for years- Hot Door. It is an architectural plugin (I guess you would consider it a plugin). It works great but a little pricey- well worth the price if you do this a lot. Hot Door

I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it sti

Hi
I'm trying to update my apps using the creative cloud desktop app. I can't see any apps in the app tab, the wheel just spins round and round and nothing happens. Has anyone got any ideas? I've tried uninstalling the desktop app and reinstalling but it still has the same problem.
Cheers
Rachel

Hi Rachel,
You can follow the article: App doesn't open | Progress wheel spins continually to get your issue fixed.
Let us know if the issue still persists or not.
Regards,
Ratandeep Arora

Has anyone tried

Post Author: Horizon57
CA Forum: General
Has anyone tried creating sections in a Crystal Report where analytic comments (or any sort of text) is fed in from a database. I am trying to build a report where users have entered comments (into an Access database) to accompany the charts and graphs on a report.
The main idea is to have these comments auto populate in the report when it is run just like the rest of the data fields.
Does anyone have experience with anything similar to this?
Mike

Post Author: V361
CA Forum: General
You can insert a section in a group (it will insert below whatever is already there), then drag the field into the report, select can grow, and see what you get.....

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried disabling DART?

Has anyone tried disabling DART in the boot-args on an XSERVE running Tiger with 2GB RAM? Are there any effects on the PCI cards, except the obvious?
Roger

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Has anyone had any luck returning there iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months

Has anyone had any luck returning their iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months & months .. The Apple tech told me that all I could do is wait for Apple to come up with a fix... Got a new router this week so that isnt' it. Would I be better off w/o this until Apple gets their act together? I downloaded the combo update 10.7.3 & it helped for about a day... yesterday I still had to manually reset the connection but now it's resorting back to disconnectiong w/o fully going into sleep mode first. Sorry to say this is a major lemon. Help!

Seems unfair... I thought I was probalby having a router problem... got a new router this week. Thst's when we realized we have a computer problem. My next door nieghbor got zero sleep staying up all night while trying to help us figure out what the problem could be. He said if it were him he would have returned the iMac / Lion. Got the new iMac w/ Lion for Christmas but didn't realize until this week that Apple is the problem.... Hard to believe that Apple just has kept on selling this like ... oh No problem! Can't stay on the internet... but will sell you another one today! I'm getting mad... It's not every day we spend that kind of money on a computer . & ALL they can give us is that LOUSY Lion combo update. I can't even stay connected long enough to make a vitamin order with Puritan's Pride... & then the disconnection wipes out my cart... so I have to start over. When are they going to fix this! 'Not feeling very positive'. I feel like Apple KNOWINGLY sold my husband a defective... system. 14 days... oh please...

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Has anyone tried a 3rd party laptop cooling pad?

I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?

I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6)

Has anyone tried to pack CPAN modules

i wanted to build yeemp
http://deekoo.net/technocracy/yeemp/
but it needs some modules from CPAN ... well i know how to get them for my machine over the perl-cpan shell, but this is not the arch-way ... has anyone tried to pack them to packages?

sarah31 wrote:
according to apeiro these files should not be installed. i believe they are just database module that cpan uses. there fore they are pointless in an arch package. perl packages can be alot more detailed than the one you post here. many do not have an easy ./configure&&make&&make install. often doing the make install part wil create an empty package as the files go directly to your computer.
just execute caution when building.
thanx, i will remove this file from the packages that i build from cpan, ok
i'm always first building packages as a user with very little access to the system ... to prevent scripts writing something to the wrong place --- and then switch to root to build them for true, so if a script wants to write something to the wrong place, i get a permission denied and i see what i have to change

Has anyone tried any of these coolers?

Similar Messages

Maybe you are looking for