Has anyone tried disabling DART?

Has anyone tried disabling DART in the boot-args on an XSERVE running Tiger with 2GB RAM? Are there any effects on the PCI cards, except the obvious?
Roger

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Similar Messages

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks?

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks? I have finally given up on Dragon Dictate for Mac, which alas, after years of buying every new updated version, is still exceedingly buggy and does not begin to compare in quality to the PC version. I love my Mac, and don't like my PC at all, but the third-party voice dictation software for Mac is so pathetic, that I have wound up dictating on my PC, and then sending it to my Mac: an truly annoying and Baroque process. I was able to train over 120 words in Sanskrit word perfect on Dragon NaturallySpeaking, but on Dragon Dictate for Mac, I can't even get it to train my name. I know this is not an Apple problem, but I'm trying to find a way around by possibly running the DNS version on Windows on my iMac.
I have a hand disability, so I really do need to use voice dictation, both for dictating and navigating on my computer.
If anyone is doing this, are you using Boot Camp, VM fusion, or Parallels? How well does it work? Has anyone discovered anything else I ought to be considering, before giving this a try? I had tried running this on an old on 2008 iMac (with much less power), using Parallels, but it was incredibly slow. Now that I have a much more powerful iMac, I'm wondering whether it would be worth another try. As it will be quite an investment to purchase all this third-party software to get Dragon up and running, I was hoping to get a sense of how well it works, before plunking down the cash. I would be extremely grateful for helpful feedback.
IMac, Mavericks OS X 10.9.4, 3.5 GHz Intel core i 7, 8 GB 1600 MHz DD3, Dragon NaturallySpeaking 12, Dragon Dictate 4.0.2

You cannot run a Windows application on a Mac unless you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Has anyone tried

Post Author: Horizon57
CA Forum: General
Has anyone tried creating sections in a Crystal Report where analytic comments (or any sort of text) is fed in from a database. I am trying to build a report where users have entered comments (into an Access database) to accompany the charts and graphs on a report.
The main idea is to have these comments auto populate in the report when it is run just like the rest of the data fields.
Does anyone have experience with anything similar to this?
Mike

Post Author: V361
CA Forum: General
You can insert a section in a group (it will insert below whatever is already there), then drag the field into the report, select can grow, and see what you get.....

Has anyone tried 1 terabyte drives with Apple G5 PCI RAID card 1M9699g?

I am planning on setting up RAID 5 on one of my PPC G5 Xservers with an Apple PCI RAID card and 3 Hitachi 1 terabyte HDs. At $180 a drive and a $300 or so for a card this seems like a good setup. Has anyone tried this or have any suggestions.

It worked, for about $860 I now have a 1.8 TB xServer

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Has anyone tried a 3rd party laptop cooling pad?

I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?

I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6)

Has anyone tried a *real* role-link ? - (bea support pls respond)

Hi
Has anyone tried using different role-name and role-link in the security-role-ref section of web.xml.
isUserInRole method fails with this.
given a section in web.xml as:
<security-role-ref>
<role-name>xyz</role-name>
<role-link>abc</role-link>
</security-role-ref>
<security-role>
<role-name>abc</role-name>
</security-role>
u would say isUserInRole("xyz"); right?
but weblogic 5.1 always returns false
it instead behaves properly with isUserInRole("xyz"); which is wrong behaviour.
Please correct me if i am wrong.
thanks
sriram

I don't have a definitive answer, but I would guess you won't find a tech support service dedicated to the Flash Player since it is free software and customers apparently have problems getting tech support for the products they buy. But here are a couple of things worth considering.
Try posting/looking thru the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player
Try submitting a bug report...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Has anyone tried using "ffmpegx" to compress video files to Xvid files?

Has anyone tried using the program ffmpegx to compress your video files into Xvid files? Still trying to find a magic solution to save some space on my hard drive

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried disabling DART?

Similar Messages

Maybe you are looking for