Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Similar Messages

Home Sharing Between MAC and PC Problem

Hello all,
I am having an issue with home sharing between my iMac and PC. Here is the setup:
IBM x61 tablet with Windows 7 Ultimate 64 bit- I run itunes and see the iMac's itunes library just fine and can import perfectly
iMac with Snow Leopard- iTunes can see the IBM's library but can't load the library; it gets hung up. Also, the icon next to the library from the x61 is a music symbol and not the home icon so I know something is wrong. I have tried everything in the troubleshooting section of the apple support page besides opening the ports. It seemed to have happened witht the latest iTumes update.
Should I try port forwarding? I use a d-link 815 router and have avira anti-virus. Has anyone had success with windows 7 firewall and the ports?
Any other suggestions? Thanks in advance.
Diggs

I'm not 100% sure of the terminology used by Windows or any other Windows firewall programs but in essence what you want to do is allow those port to pass through. Forwarding sounds correct to me. Do you only have one firewall active? I know Windows has its own built-in firewall and some security software also install firewalls and I know some people don't realize that they are running two and should turn one of them off. Not sure if you amy be running into that problem.
Here is a thread where someone shows what they did with their firewall settings to get things to work.
https://discussions.apple.com/message/16495919#16495919
Also, I wrote this for someone else. It explains how sharing in iTunes works. Maybe it can help you to troubleshoot your problem.
Home Sharing is enabled by selecting Home Sharing from the 'Advanced' menu (see screen shot below) and entering your Apple ID and password. Home Sharing allows unrestricted access to the shared iTunes library from computers on the network as well as from iOS devices. Home Sharing is required for access by iOS devices, they do not work with Library Sharing. Home sharing also allows you to copy media from one computer to another, something you can't do with Library Sharing. Home Sharing overrides Library Sharing if both are enabled.
Library Sharing is enable by selecting 'Share my library on my local network' in iTunes Preference (see screen shot below.) Library Sharing does not work with iOS devices. Library Sharing only allows for the playback of media from shared libraries. You cannot copy media from one computer to another using Library Sharing. The 'Status:' indicator will display a count of the number of computers that are connected to your library using Library Sharing. Home Sharing connections will not be indicated here. You can also restrict who can connect to your library using a password. This password restriction has no affect on Home Sharing connections. They are authorized and controlled by the use of Apple IDs.
How to tell if you are connecting to a library shared by Home Sharing or Library Sharing (see screen shot below.) A Home Sharing library icon looks like a house with a musical note on the side. A Library Sharing icon looks like a stack of CDs with a musical note on top. They are both labeled by the name of the shared library as configured in iTunes Preferences.
I think I've covered everything and hope this helps people understand the difference between the two types of shared libraries and how to configure each.

Home Sharing between Mac and PC

So I have Home Sharing enabled on both my Mac and PC, and signed into both with the same apple ID.
From my pc, i have installed the latest version of Itunes, and on my mac I have the latest version of Itunes.
I can access my library on my mac from the PC, but I cannot see any of the things located below.
When prompted, enter your Apple ID and password.Note: Be sure to use the same Apple ID when enabling Home Sharing on all computers you intend to share with.
Click Turn On Home Sharing.
Use the above steps to enable Home Sharing on additional computers on your home network.
Setting up Automatic Transfer
Automatic Transfer can transfer your newly-purchased apps, books, music, TV shows, and movie purchases to your other computers set up for Home Sharing.To automatically transfer content between computers, click the Settings button in the lower-right while viewing a Home Share and select which content to transfer. Automatic transfer of iTunes Store content is off by default.
Note: The Settings and Import button aren't present if you're using Music Sharing, which is different from Home Sharing.
Automatic transfer applies to new purchases from the iTunes Store whenever they are made. However, updates aren't transferred (such as those from the App Store).
Automatic transfer only applies to iTunes Store content you purchase or download after enabling Home Sharing.
Previously downloaded or non-iTunes Store content can only be manually transferred. It may be necessary to authorize iTunes Store content for playback on other computers.
Audiobooks purchased through the iTunes Store can be automatically or manually transferred.
Home Sharing can't transfer or stream audiobook content purchased from Audible.com. SeeAudible.com for assistance in using their content on multiple computers.
In addition, rentals from the iTunes Store can't be streamed or transferred to another computer using Home Sharing.
Home Sharing tips
The best way to avoid duplication is to use the Show menu located in the lower-left corner. Choose "Items not in my library" before transferring any content.
I do not have a drop down menu in the Home Sharing window, and also cannot choose items not in my library.
MY question is, how do I copy my purchases from Itunes from my mac to my pc????
Step by step please.

Hi clissmann,
It sounds like you simply wish to have your purchases on both your Mac and your PC. You can accomplish this by accessing your past purchases using the information in the following article:
Download past purchases - Apple Support
http://support.apple.com/en-us/ht2519
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Home Sharing between pc and ipad. Where is the library and sharing icon on ipad?

Hi, I have followed the exact Apple instructions on how to set up Home sharing on both Pc and ipad2. However when going to music app or videos app, I see no icon for the library or shared library as shown on the screen shots. Tried to see supports troubleshooting, but there is no indications on how , where and when these Libraries should show up. There is something saying you should immediately create a library on your ipad, but no instructions on how to do so. So for any of you with a successfull sharing setup between pc and ipad, any tips are appreciated. I.e. When and where will the shared library show up on the ipad if it ever will?

When you turn on Home Sharing on your PC you will only see the Sharing option in the sidebar if other computers on your network also have iTunes running with Home Sharing turned on as well.
As for how to get it to work on your iPhone go into Settings on your iPhone and scroll down to Music. Tap on the Music settings button. On the Music screen, in the Home Sharing section enter the Apple ID and password that you use on your PC.
Now go back to your Home screen. Launch the Music app. Tab on the More button on the bottom of the screen. On the More screen tap on the Shared button. You should see a list of all available shared iTunes libraries on your network. Make sure iTunes is running on on your PC with home Sharing turned on. You should now see all the music on your PC's shared library. You will not however be able to wirelessly transfer the music from the shared library to your iPhone. You will only be able to play it.

Adobe Lightroom 4 for Mac and Windows, can I install the same license on both systems or only 1?

I just purchased 1 full license of Adobe Lightroom 4 and I can see there's an installer for Mac and Windows.
does it mean I can install on both systems or my license is only valid for 1?
Thank you
BR,
Lucia

Yes, LR is cross-platform and you can install it on both systems.
Mylenium

Home Sharing Between Mac and PC with Windows Vista and Wireless Ethernet

Hello.
I want to ask if anyone knows what is the problem.
I have Home Sharing Activated in my two computers and File Sharing Activated too.
My MacBook Pro has iTunes 10 and Snow Leopard all updated and my PC has Windows Vista and iTunes 10.
My MacBook Pro is connected to my network wirelessly and my PC is connected by the Ethernet Cable.
Anyone can help?

since you don't describe the problem in detail, see if something here helps:
what you want to see in iTunes is this (view from my MBP's iTunes seeing the library on my Mini)
if you then click on the house icon, it will change to this and the shared library will load. at that point, two buttons will appear in the lower right corner of the iTunes window, being settings and import
now you should be able to import any content from any shared library by selecting the content and clicking on import.
if the icon looks like this , home sharing has not been set up correctly.
in order for home sharing to work
(a) iTunes on all machines must be authorized for the same iTunes store account
(b) all machines must be on the same network
(c) all machines must have access to the internet.
if none of the above makes a difference, try turning home sharing off on all computers, then turning it back on.
these reads will be useful: one and two.
JGG

Internet sharing between Mac and Windows XP

I am trying to establish an airport wireless network with a Powermac G5 desktop and a Dell laptop with Windows XP, but have been unable to establish even an open network, let alone a secure WEP network. The laptop recognizes the network and ostensibly establishes a connection, but the browser (I've tried both Firefox and Explorer) is unable to connect to any webpages. Any ideas?
Thanks,
David

OK, let's find the IP of the Airport on the Mac and the IP on the PC's connection.
Find IP on computers...
http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
Hopefully Macs Airport will be like x.x.2.1, and the PC x.x.2.x+1
We aren't do File Sharing or Windows Sharing at the same time are we?
You didn't create a Computer to Computer Airport Network on the Mac and are connecting to that are you?

I am unable to share files satisfactorily over my home network between Mac and Windows

Please advise.
I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB. The iMac also has a virtual PC in it using VMWare.
I have never been able to get file sharing to work satisfactorily across the network.
From the iMac, which is now running Yosemite, I can access the laptop and the external hard drive fine, but connections to the WD network drive are very slow and unreliable.
From the laptop, I can access the iMac and the WD network drive OK but while the LaCie share formatted for windows is visible, I am unable to open the individual files.
I was advised that I need a server. I have therefore bought and installed OS X Server on my Mac but I don't understand it and have absolutely no idea what to do to make it work. I open the LaCie share for example and cannot change anything - I get the message " 'Ignore ownership on this volume' is turned on for the volume containing the Share Point. All permissions will be ignored. This can be turned off in the 'Get info' window in the Finder." Except it can't, because there is no such option in that window.
I can find no help anywhere for this. Please tell me how I set my network up so that files can be shared freely across it.

Poor show Apple
Apple personnel aren't here. We're all just users like yourself and apparently there's no one here who's seen your post and can offer a solution.

ITunes sharing between Mac and PC is not working

iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Just follow the directions here:
http://support.apple.com/kb/HT5661
That's all you have to do.

I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Help: symbol shifting between mac and windows, flash cs3

I'm doing work reviewing flash files created by other users
on mac and windows. I'm using os x 10.5.6. When I open a file
created in windows / flash cs3 some symbols on the stage will have
shifted upwards on the y axis. If I correct the shift and then send
it back to the windows user they see the symbols incorrectly
aligned, as if I had moved symbols around on a correctly aligned
file.
The strange thing is not everything on the stage is shifted.
Only particular symbols will move, and it's usually symbols only
(not text frames, drawing objects, etc).
I believe there's a general history of bad behavior when
saving flash files and trading them back and forth between mac and
windows, but does anyone know what may be causing this? Or a
remedy?
Thank you in advance.
Peter

also, I tried opening the same files in vista using a mac
mini with vista installed on a bootcamp partition. When opening
other windows authored flash files there I had shifting issues as
well, so I'm not convinced it's strictly a mac vs. windows issue.
Unless it's a flash cs3 on windows xp doesn't like mac flash cs3
and vista flash cs3...

Is there a way to sync my saved user ids and passwords between Mac and iPhone using iCloud?

Is there a way to sync my saved user ids and passwords in Safari between Mac and iPhone using iCloud? Like I can do using Chrome for Mac and iOS...

You three would do better to sync to google directly. Google has a blackberry app that will allow you to sync your contacts and calendars. The app isn't perfect, but it works reasonably well, especially if you're just using one calendar to sync.
Then there's plenty of ways to sync those to your iPad using Google, including Exchange, or simply adding it as a google account.
As for iCloud, there really isn't any supported or unsupported method to do what you're trying to do, at least at this time. If there is, it would definitely be a hack and I would be wary of risking your contact or calendar data on it..

Share files between Mac and Windows in same iMac with boot camp

Hello,
I am new in using Mac and recently I buy a IMac 24" model.
I used to use PC a long time with a lot of old document.
I want to install Windows XP with boot camp.
But I also want to share my documents, music, video files between Mac and Windows in same iMac.
How can I do this?
Thanks in advance,
Eric

Hi Eric and welcome to Discussions and the Apple world.
Mac OSX can read and write from Windows partitions (like the BootCamp Windows partition you are about to create) when using FAT32 as file system for Windows.
However with FAT32 you are limited to a partition size of 32GB.
Mac OSX can also read from Windows partitions that uses the NTFS file system, but it can not write to them unless you use a third-party helper like either Paragons NTFS for Mac http://www.paragon-software.com/home/ntfs-mac/ or NTFS-3G http://www.ntfs-3g.org/
Windows can not even see or use a Mac OSX partition without additional help by MacDrive http://www.mediafour.com/products/macdrive/
Regards
Stefan

Transferring keyboard shortcuts between Mac and Windows

I need to migrate users from Mac (CS 5.5) to Windows 7 (CS 6). I have tried to transfer a user's custom keyboard shortcut set by copying the .indk file to the appropriate folder on the PC, and although it shows up in the list, when I try to select the set I get an error saying it is in the wrong format or the file could be damaged. Is there a way of transferring keyboard shortcuts between Mac and Windows?

Shortcut sets seem to be human-readable text files, so you could try making a copy and doing some editing, changing cmd to ctrl and opt to alt, and change the platform value in the first line to "win" though I can't make any promise it will work.
There are also some known problems trying to migrate legacy sets into newer versions of ID since CS5, I think.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

Similar Messages

Maybe you are looking for