Has anyone tried HP's new "E"printers? And more general printer help.

HP has released some new printers that have their own email address, and don't require any special drivers, you just email something to them, and it prints. It sounds like it would be great for linux users, especially since it probably runs linux, but you never know. Some potential issues might be a) file size b) file formats.
I was googling around for a printer that would meed my needs: I need it print AND scan wirelessly without ever interfacing with a proprietary OS . I thought that the e-print concept might be perfect for this. I don't think that these things can send scans to email addresses, but that would be really sweet!
PS Believe me, I've been googling. In fact, hours of googling led me to buy the hp 3050. Someone had managed to get the thing to print wirelessly. Problems with it are a)I can't connect to the ad-hoc network reliably (I think this unit may be defective) and b) It just seems like a hunk of junk to me. I want something nicer.

We have here a Brother MFC -8880DN that has replaced a MFC-8860DN - they have been serving our linux-only office for the past 5 years without noticeable hiccups.
The printer works perfectly with cups on our server and scanning over the network is done through FTP or an email: either in PDF or TIFF. I wrote a 20-line bashscript that OCR's a .tiff that is uploaded automatically via FTP to a certain location. The only thing that I have not really tested is the Fax-driver. I should be able to make a Libreoffice-macro to save a letter to a certain location and then fax it automatically via the Brother faxdriver. In a few tests I ran, the driver seemed picky about the PS-format it accepts, but nothing that couldn't be remedied I guess.
There is a wireless model also, so I guess this would deliver everything you need.

Similar Messages

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Has anyone tried getting a new phone and then giving your old phone to someone else? because if you have, did you deactivate your iphone on your support profile before so? and will the person who gets it be able to activate it as thiers again afterwards?

Just follow the directions here:
http://support.apple.com/kb/HT5661
That's all you have to do.

Has anyone tried syncing the new iPod Touch 4 with OS 10.4.11?

I know the "official" Apple spec's state the new iPod Touch 4 are
for it to sync with OS 10.5.8 and use iTunes 10 .... but has anyone been
successful in using the new iPod Touch 4 with OS 10.4.11 and iTunes 9.2.1?

Does iTunes see the iPod? If not
iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
You need iTunes 10.7 or later on the computer
The iPod touch uses different drivers than the Nano

Has anyone tried sample SDKCommandLineSSO.java in JES2005Q1 and succeed?

I tried to run the sso sample:
SDKCommandLineSSO.java
under JES2005Q1(installed on Solaris 10), but failed, meanwhile another sso sample:
CommandLineSSO.java
can run successfully!
These two samples can be found at the location:
SUNWam//samples/sso
I just make them and modifed the run bat file to run SDKCommandLineSSO instead of CommandLineSSO, but it throws an exception as following:
# pwd
/export/home/sunone/SUNWam/samples/sso
# . ./run
CLASSPATH IS:.:/etc/opt/SUNWam/config:/export/home/sunone/SUNWam/lib/am_logging.jar:/export/home/sunone/SUNWam/lib/sax.jar:/export/home/sunone/SUNWam/lib/jaxp-api.jar:/export/home/sunone/SUNWam/lib/dom.jar:/usr/share/lib/mps/secv1/jss3.jar:/export/home/sunone/SUNWam/lib/servlet.jar:/export/home/sunone/SUNWam/lib/am_services.jar:/export/home/sunone/SUNWam/locale
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/identity/authentication/internal/InvalidAuthContextException
at com.iplanet.sso.providers.dpro.SSOTokenImpl.<init>(SSOTokenImpl.java:86)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:140)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:284)
at SDKCommandLineSSO.main(SDKCommandLineSSO.java:58)
However, I can find com/sun/identity/authentication/internal/InvalidAuthContextException in am_services.jar, which has already been in CLASSPATH. Can anyone help?

This problem has now been solved by a stackoverflow user. Visit here if you are interested:
checkbox - JavaFX: compatibility issue between Java 7.4 and Java 8 - Stack Overflow

Has anyone tried saving WMP stream as Quicktime and importing to iTunes?

I saw a thread on the internet about listening to Windows Media streams in iTunes via the following method. I had limited success. The streams only last for up to 5 minutes or so.
Does anyone know of a way to make this work more consistently?
Step 1. Download and install Flip4Mac WMV.
Step 2. In Flip4Mac preferences, click on Movie, select "Create streaming movies".
Step 3. In WMP stream, on the right hand side, click the downward arrow, choose "save as Quicktime movie".
Step 4. Drag Quicktime movie onto iTunes.
Step 5. Play movie in iTunes.
I have done this several times and it always works. The problem is that the stream only plays for a few seconds to as long as 5 minutes.
Any suggestions anyone? I'm not technical at all, but don't like listening to streams in the browser if I can avoid it.
Thanks,
jr
Titanium Powerbook Mac OS X (10.4.8) iTunes 7

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has Anyone tried this new plug in WooWave Sync Pro?

Hi there
Has anyone tried this new plugin Woowave Sync pro?
They claim to offer better results than you can get with the built in synchronizing engine.
I downloaded the trial but can't figure out how to enable it in fcp.
I got this crappy footage.. hours of it and I really need something to sort it out , hate manual syncing
fcp tries and does some of it, but I got hours left unsynced.

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Have 1 POP3 email account I want to work like IMAP email in icloud. Apple suggested created a new Apple ID just for POP3. Has anyone tried this to see if it works and will delete across multiple devises?

Have 1 POP3 email account I want to work like IMAP email in icloud (keeps my iMac, iPhone, ipad mail in sync). Apple suggested trying creating a new Apple ID just for that POP3 email. Has anyone tried this to see if it works and will delete/update across multiple devises? Would mean keeping up with two Apple ID accounts but only other alternative I know of is paying for monthly service for Microsoft 365.

would I be able to "upload" (not sure how else to say it) my existing folders and subfolders containing all my emails so that they are all available on my new IMAP service, while still being available on my Mac?
Not easily, no. There's no direct transfer option between POP and IMAP, especially across email providers. The best you could do would be to forward all of your emails to your new address, although it's not clear that you need to - dropping your sbcglobal.net account doesn't instantly render all your existing mail void - it'll still be in your Mail client, you can still read it, search it, etc., it just won't be on your provider's server.
I have toyed with the idea of getting a MobileMe account. Would that solve my issue/question above?
MobileMe would be viable, especially if you're interested in synching your various iOS devices. It's not free, of course, unlike Yahoo and Gmail, although you've already discounted them...
I have also toyed with purchasing my own URL, but it's hard to tell from the sites (1and1, Namecheap, etc.) if they come with IMAP email accounts included.
Some registrars offer email hosting bundles with a domain registration. This could be a good way to go. GoDaddy, for example, have a email hosting option for domains you register with them.

Has anyone tried the new retina display MBP with a projector?

I bought a new MacbookPro with retina display online the other day (hasn't arrived yet). I use this primarily for business doing presentations etc. Has anyone tried connecting a projector using the Thunderbolt VGA adapter? Just curious if it'll work.
Thanks

Similar problem. I used my macbook Pro Retina with my Thunderbolt to VGA adapter all through the fall, and never had any trouble with it. Just before Christmas I got a Thunderbolt display.
Since that time, whenever I connect the projector, I get a black screen. I can see and move the mouse, but nothing else. Other computers still work with the projector.
I'm not certain if the Thunderbolt Display has anything to do with this or not, but it's just the timing that it happened.
Grateful for anyone that can offer help!

Has anyone tried the new MS Oracle DataProvider ?

Hi all.
Has anyone tried the Microsoft issued Oracle .Net data provider? I am not fond of switching horses in midstream (have been struggling with ODP for a few weeks). I do not like the ODP for these reasons...
1) Documentation is really non-existant/useless especially where hueristics and 'gotchas' are concerned
2) it is a HUGE install (why I have no idea)
3) some things simply do not work (like my recent rants on trying to return varchar2's from stored procs and functions).
Is the MS any better ?
Thanks

Hi,
1) There is a pdf doc and integrated help which comes with the ODP.NET. There are a few gotchas which could cause some hair-pulling moments. Sometimes it helps to read the same doc several times to really know what to do.
But instead of wasting time reading the doc, the samples cover most of the typical cases. (i think it includes your varchar2 output bind case).
2) The huge install is due to Oracle Client 9. The provider needs several dlls beyond Oracle.DataAccess.dll and OraOps9.dll. There are some other oracle standard dependencies also. MS provider for oracle will have the same issue (I think they need oracle client install also).
There a few post where the `Instant client install` is going to solve that.
But the thin client (like JDBC thin driver for oracle) is still (IMHO) the best solution for the huge install problem.
3) See my reply in the other post. (try the sample also)
Finally, which some other posters have mentioned before: Good luck looking for help for MS's provider when you are stuck.
Arnold

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Has anyone tried to send a Flash-app to the App Store?

Has anyone tried to send a Flash-app to the App Store, after the new statement from Apple? If yes, what was the answer back from Apple?
I see that the previous apps made from Flash CS 5 is still up on the App Store. Maybe there is a small hope for Flash developers?

Well, if they accepted a Flash-made app, then I would work more on my iPhone Flash-game before sending it to App Store. I don't think I'm gonna make better graphics etc, if the app only will run on my phone. And I don't think I'm gonna send a 70% done game to the App Store, and if they accept it, then finish it.
So it would be very helpful to hear a "success story".

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks?

Has anyone tried running Dragon NaturallySpeaking (for Windows) on Mac Mavericks? I have finally given up on Dragon Dictate for Mac, which alas, after years of buying every new updated version, is still exceedingly buggy and does not begin to compare in quality to the PC version. I love my Mac, and don't like my PC at all, but the third-party voice dictation software for Mac is so pathetic, that I have wound up dictating on my PC, and then sending it to my Mac: an truly annoying and Baroque process. I was able to train over 120 words in Sanskrit word perfect on Dragon NaturallySpeaking, but on Dragon Dictate for Mac, I can't even get it to train my name. I know this is not an Apple problem, but I'm trying to find a way around by possibly running the DNS version on Windows on my iMac.
I have a hand disability, so I really do need to use voice dictation, both for dictating and navigating on my computer.
If anyone is doing this, are you using Boot Camp, VM fusion, or Parallels? How well does it work? Has anyone discovered anything else I ought to be considering, before giving this a try? I had tried running this on an old on 2008 iMac (with much less power), using Parallels, but it was incredibly slow. Now that I have a much more powerful iMac, I'm wondering whether it would be worth another try. As it will be quite an investment to purchase all this third-party software to get Dragon up and running, I was hoping to get a sense of how well it works, before plunking down the cash. I would be extremely grateful for helpful feedback.
IMac, Mavericks OS X 10.9.4, 3.5 GHz Intel core i 7, 8 GB 1600 MHz DD3, Dragon NaturallySpeaking 12, Dragon Dictate 4.0.2

You cannot run a Windows application on a Mac unless you run Windows on the Mac.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Benchmarks of all of the above except Crossover can be found in Benchmarking Parallels, Fusion, and VirtualBox Against Boot Camp - The Mac Observer. Boot Camp is only available with Leopard or later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

Has anyone tried HP's new "E"printers? And more general printer help.

Similar Messages

Maybe you are looking for