Has anyone tried to add a Dericam to Time Capsule

I have a Dericam and I cannot get it to pare with Time Capksule. I have been in contact with the manufacturer but they haven't been much help. If anyone has had ant experience withe this product any help would be greatly appreciated.

6.1...7.6.1 so I guess I'm past toyland.
I con trol access to my TC with Mac address and the Dericam came with one so I have loaded it into TC. I find this form of security the best. I wish the Dericam would connect using this form. I have the option of a guest network and am wondering if the radio channels apply here or do they only apply to primary network.

Similar Messages

Has anyone tried to replace the HD in time Capsule?

I was wondering if anyone has cracked open their TC and tried to replace their 500GB with a higher capacity drive, like a 750 or 1TB. I would love to hear about your experience.

Hello Mike.. Yes I cracked open my T.C and changed the 500Gb drive it came with and swapped it with the Seagate 7200.11 1TB SATA Hard Disk Drive 32MB Cache.. It was a breeze to do and I didn't find any difficulty at all with the swap now I have a spare 500 Sata drive which I can replace in my computer as that particular hard drive is now 7 years old and needs upgrading anyways.. The only problem I encountered was the rubber part the glue underneath kinda went lumpy in places then when you put the rubber back it was all lumpy underneath and showed through the rubber but I got all that sorted and removed the glue lumps now it is smooth, the rubber mat can be removed multiple times and the glue is still strong enough not to let go now with the added heat it is stuck fast and no problems at all.. If your thinking of doing this then go ahead it isn't any more complicated than replacing the hard drive in your desktop computer.. Oh when you remove the rubber mat you will find 10 small screws as well there is a fan attached to the motherboard but this I removed carefully then I was able to lift the base plate clear until the old and new hard drives were replaced..
Hope this gives you some encouragement to do a retrofit yourself, but to all those crying about warranty issues, don't worry as hard drives and wireless cards are usually bullet proof and are the last things to fail so i'm not particularally worried anyways..

Has ANYONE got a printer to work on Time Capsule network?

I've tried two different printers and neither work with Time Capsule. I've checked this community and most state they cannot get the printer to work. Is there any secret to get this working. I just bought Time Capsule and I bought it mainly for printer to work on network. Is this just ANOTHER feature that Apple claims to work. . . but it doesn't?

Did you actually "install" the printer when it was connected to the USB port on the Time Capsule?
By that, I mean.....follow the steps (Page 17-18) in the Setup Manual for the Time Capsule?
Connect the printer to the USB port on the Time Capsule and power it up
Open System Preferences (gear icon on the dock)
Open Print & Scan
Click the + (plus) button at the bottom of the printer list on the left
If your printer is supported, it's name or a similar model will appear in the next window
Click the name of the printer to highlight it
Click Add at the lower right
Try to print
You have to select the correct printer "location". If you previously installed the printer when it was connected to your Mac, it will appear as if you have two of the same printers.
A closer inspection will reveal that one is located at the Mac and the other is located at the Time Capsule.
You have to chose the correct "location" at the Time Capsule. You may need to restart the printer as well.
Most printers will work.
But, if you have an All-in-One type device.....only the print function will work. Other functions like scan, copy, maintenance, etc are not supported.
That's not Apple's fault. The printer manufacturers have not provided full function drivers for network USB connections.
If you have an All-in-One, or are shopping for one, you need a "network" device as LaPastenague mentions. If the All-in-One connects using wireless only, or using Ethernet, you will have full functionality over the network.

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried to extend Spatial with a 3D primitive?

Has anyone tried to extend Spatial with a 3D primitive that for example can model buildings and tunnels? I am trying to add the polyhedron primitive next to the existing point, line, polygon model. I just want to hear some tips or ideas...

The plan is to make a new GType and new stored functions that recognize this GType.
A polyhedron could be of type 3008,3D and 8=polyhedron(=new). The elem_info
and ordinates contain multiple planes. Self-created stored functions would be
able to recognize this GType, e.g. area3D should give the sum of the areas of all the
faces of the polyhedron and should also work on Gtype=3003 and give the real area
of a 3D polygon instead of the projection.I wouldn't suggest this methodology if you are considering using any spatial indexing or
functions with your data.
There is a mechanism Oracle Spatial has for defining custom datatypes. It should only
be used with custom apps, i.e. it won't be usable in the context of applications that know
about Oracle Spatial data types.
The mechanism allows you to define you own element using an element type of 0, and using
the interpretation to define what you are looking at. You would also include an a supported
element type that approximates your geometry, and that element is the one that is indexed,
and the gtype entered is associated with that geometry. Your private functions could access
the 3d geometry when required. For instance, you want to have a 3d cube. It might look like this:
sdo_gtype=3002
sdo_elem_info=(1,2,1, 7,0,1, 22,0,2 etc.
sdo_ordinates=(0,0,0,2,2,2, 0,0,0,2,0,0,2,2,0,0,2,0,0,0,0, 2,0,0,2,0,2,2,2,2,2,2,0,2,0,0, etc
the 1,2,1 in the elem info array corresponds to a 3d line string that when indexed with a minimum bounding
volume encloses the 3d cube. The 0,0,0 and 2,2,2 in the ordinate array stored as the line string when indexed
include the bounds of the cube. Next in the elem info array are 7,0,1. The 7 means offst 7 in the ordinate array
and in this example is fixed. Next the 0 tells Oracle Spatial to ignore this element. The interpretation of 1 you define,
the number could be anything. Since it is my example, I'll say the 1 means this is the definition of the first face in the
x,y plane (i.e. the front face of the cube which faces me). I've set the ordinate array with the coordinates of that face.
Next in elem info comes 22,0,2 which is starting at offset 22 there is another element that Oracle spatial should ignore
(element type 0), and next comes 2, which might mean this is the second face definition, that I've defined as the right
hand side y,z plane.
etc.
The meaning of the interpretation value is only limited by your imagination.
Note while you can index three dimensions if you want, the only spatial functionality that supports 3d is a spatial
index and a filter query, and some lrs functions. You will not be able to run any operator except for SDO_FILTER if you
have a 3d index, and all spatial functions will only work on 2d.
Do not define your own gtype and expect to use spatial. it will not work.

Has anyone tried a 3rd party laptop cooling pad?

I have had my macbookpro 2.16 for about 2 1/2 weeks now, temp averages at about 40c during what i normally do, but the base of it is still too hot to comfortablly use on my lap. I have been using a large book as a buffer for the heat, recently I saw some 3rd party cooling pads with fans in them, running of USB power, has anyone tried one?

I use Vantec Lapcool 4. It folds and quite small for transporting (fits nicely into my bag). It uses 2 fans powered either by USB or by AC. Also adds 4 USB ports.
It makes about 10C defference. Since it keeps the case cooler and MBP doesn't build up heat like it used to, so works quite well.
The only con I've found is that the MBP slips a bit on the pad so I bought a package of small, clear, self-adhiesive, non-slip rubber cushions to put on the bottom of the lappad (~$2@Home Depot). Now MBP sits securely without any slippage.
Mac OS X (10.4.6)

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro?

Has anyone tried a 4GB HDD in a Mid 2010 Mac Pro? I've read that you could go as high as 3GB with no problems although not supported. With the prices of HDD's dropping, I'd like to add more storage to my system, either internally of externally, but I'd like to get a couple of 4GB drives, and was wondering if anyone has used that combination with a Mid 2010 Mac Pro 8 core.

Drives as large as 16TB are directly supported in Mac OS X and behave well when formatted with GUID partition Table -- the default after 10.4.4.
There is a Bug in the Erase function in Disk Utility from 10.8.4, that is unresolved at this writing. Drives over 2.2TB, once erased with this software as an Internal Drive, the drive cannot be further partitioned or erased by that same software. A fix in 10.9.3 or later is anticipated, but not guaranteed. Older versions work fine. External enclosures with Large Drive support work fine.
Western Digital in particular (and others may soon follow) has also shortened the depth of the mounting holes on certain large drives -- the holes adjacent to the platters -- to allow for the addition of an extra platter on certain large drives. A washer may be required to reduce the effective length the drive mounting screw penetrates into the drive.

Has anyone tried to 'adapt' the site wizard form?

I'd like to add some extra fields to the basic form - has anyone tried this at all?

Ah-ha Thank you the _shocker, basically I have added a number of extra fields now into the sitewizard template but need to know how to link up the php scrip...
My html is:
<div id="apDiv7"><form action="feedback.php" method="post">
<table width="852" height="409" border="0" cellpadding="6" cellspacing="6">
<tr>
<td align="right"> </td>
<td> </td>
<td align="right"> </td>
<td width="256"> </td>
</tr>
<tr><td width="122" align="right"><label for="tswname">*Name</label>
:</td>
<td width="217"><input name="fullname" type="text" id="tswname" onblur="MM_validateForm('tswname','','R');return document.MM_returnValue" size="30" /></td>
<td width="186" align="right"><label for="tswchildsname">Childs Name</label>:</td><td><input type="text" name="childsname" id="tswname2" size="30" /></td>
</tr>
<tr><td align="right" valign="top"><label for="tswaddress">Address</label>:</td><td><textarea name="address" cols="23" rows="3" id="tswaddress" address="Address"></textarea></td>
<td align="right" valign="top"><label for="tswstartage">
<br />At what age would you like your child to start?</label>:</td><td valign="top"><p>
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_0" />
    2 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_1" />
    2.5 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_2" />
    3 years</label>
<br />
</p></td>
</tr>
<tr><td align="right" valign="top"><label for="tswphone1">*Phone number<br />(home)</label>:</td><td><input name="phone1" type="text" id="tswphone1" onblur="MM_validateForm('tswphone1','','R');return document.MM_returnValue" size="30" /></td>
<td align="right"><label for="tswchilddob">Childs date of birth</label>:</td><td><input type="text" id="tswdob" name="childdob" size="30" />
</tr>
<tr><td align="right" valign="top"><label for="tswphone2">Phone number<br />(mobile)</label>:</td><td><input type="text" id="tswphone2" name="phone2" size="30" /></td>
<td align="right"><label for="tswcomms">*Preferred method of communication</label>
    :</td>
<td><p>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_0" />
      phone</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_1" />
      email</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_2" />
      mobile</label>
</p>
<tr><td align="right" valign="top"><label for="tswemail">*Email address</label>
      :</td><td valign="top"><input name="email" type="text" id="tswemail" onblur="MM_validateForm('tswemail','','RisEmail');return document.MM_returnValue" size="30" /></td><td align="right" valign="top"><label for="tswmessage">Message </label>:<br />
<br />
<br />
<br /></td><td><textarea name="message" cols="23" rows="3" id="tswmessage"></textarea>
</tr>
<tr>
    <td height="41" align="right"> </td>
    <td valign="top">* Denotes required field</td>
    <td height="41" align="right"> </td>
        <td height="41" align="center" valign="top"><input type="submit" value=" Send " /></td>
</table>
</form>
</div>
and the generic php script that I need to adapt is:
[Copyright script deleted by moderator. The script's terms of use state explicitly that it cannot be reproduced or distributed,.]
I just don't get which bit of the php I need to change to add in the extra fields that I require...

Has anyone tried a Western Digital SATA RAID hard drive on a non-RAID controler?

Because of a compatability problem, I want to try a different brand of SATA II drive on my non-RAID motherboard. The WD RAID drives have great specs but I don't know if they will work. WD says they are ONLY for RAID and not to put them on a non-RAID board. My theory is that they will be more reliable over the long term because they are a heavier duty drive.
Has anyone tried this and if so, what were the results?

I think there was some confusion about what I am asking. It is definately not a duplication of my other post and some of the information in that other post is incorrect because I JUST found out that my motherboard controller IS a RAID controller even though I am not using it as one. I will correct that when I am finished with this post.
The other post was about a specific model of Maxtor drive that doesn't work on my motherboard. This post is about Western Digital. The only reason that I even mentioned the word RAID in my previous post is that there is a known compatibility problem with RAID controllers and that drive. I wanted to emphasize that my problem was not the one of that known compatibility problem, but because it is a RAID controller, it might be that problem.
When you use the motherboard's controller as a non-RAID controller, you do format the drives individually, not as a RAID. I know that because I did it that way, not realizing I even had the option of using RAID on this board. That works fine on one model of Maxtor hard drive and does not work at all on the other model of Maxtor hard drive.
What I want to know now is: Will the Western Digital RAID drives will work on a non-RAID controller. The controllers on my add-in card is not RAID. Also, will that drive work on my motherboard's controller even though it is not being used as RAID.
Here is a link to the WD site's description of one such drive. There are several other WD RAID drives, this is just one example... http://www.wdc.com/en/products/Products.asp?DriveID=238&Language=en It does not state whether or not they will work well in a non-RAID environment.

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Final Cut Pro X and Macbook with 9400M chip. Has anyone tried it?

I have a late 2009 Macbook with Nvidia GeForce 9400M graphics chip. I've got 4 gig RAM installed. Apple lists this chip as working with Final Cut Pro X. Has anyone tried it on a Macbook? Is the performance adequate or should I wait until I get a more powerful laptop?

Yep, I've got a Macbook with that chipset and it runs FCPX. It's not blindingly quick but it work.

Has anyone tried home sharing between mac and windows using parallels on the same machine?

I recently purchased a mac, and plan to set up parallels for windows and windows 7 so that I can use the Windows version of Over Drive Media Console from the library and download WMA files in windows (limitation with mac version for wma downloads). I would like to synch to iTunes on the Mac iOS, but will need iTunes available in Windows to transfer the books I download in WMA format from the library to my iphone. Has anyone tried this? Any success or suggestions would be appreciated!

In case anyone is interested, last night I installed Paralells, Windows, Overdrive Media Console on Windows, and then was able to download my book in WMA format. I was hoping parallels would allow me to crossover sync to iTunes on the Mac and have Overdrive recognize that I had iTunes open, but I had to choose Windows or Mac when connecting my phone through the USB and had to choose Windows in order for it to successfully transfer. I was able to get it to work it is now synced to iTunes in Windows. The nice thing was that it pulled in all my music/apps that I had set up in the Mac side, so I didn't have to go through that exercise again. I tested it on my old phone. Now I need to decide if I want to set up my current phone on Windows or Mac, it seems that once synched it only opens the device in windows, I haven't figured out how to force the choice between mac or window again. If I do windows, I can't take advantage of the cloud or iphoto/imovie directly. I'm totally new to mac, but I think I'll have to import my photos manually.

Has anyone tried this? AutoMailMerge Plug-in for Adobe Acrobat

Mail Merge in Acrobat 9 Professional?
Hi, All!
I have been told that I can perform a mail merge similar to MS Word from within Acrobat Pro 9. The main document (with merge type fields) needs to be an Acrobat .pdf. The data source can come from an external file. The key is that the merge is performed in Acrobat, not Word.
I have searched throughout Acrobat Pro 9 but have found no functionality that matches my needs. Can anyone help me with this?
I was informed the there is this outside company that has this "AutoMailMerge™ Plug-in for Adobe® Acrobat®"
http://www.evermap.com/automailmerge.asp
Has anyone tried this? Does it work? Will it do what I'm looking do?
Please help!
Thank you!
Chistina

there are four episodes from MacBreak Studio avail for free, which explains MultiCam in FCPX
http://youtu.be/gNOfgBClIvQ
http://youtu.be/qKhmZbVgywk
http://youtu.be/eeQzOycTlOU
http://youtu.be/RS5Ct3I8Yrs
… in there, you'll find some not-so-known 'tricks' to fasten the process of synching, such as using Markers (not 'on beat' just 'approx').
I tried with my multicam soccer-recordings = no music (aside the referee's whistle ), and FCPX managed indeed to synch this stuff - impressive!

Has anyone tried to add a Dericam to Time Capsule

Similar Messages

Maybe you are looking for