Has anyone tried to link a Panasonic AG-HMC70P to On Location?

I've just purchased a turnkey CS4 system and the Panasonic AG-HMC70P Memory Card Camcorder expecting to shoot to the card in the field and go directly from the camera to On Location in the studio. So far the signal is not seen by OL in HDMI (previous post expalins that) or firewire. Has anyone successfully made this marriage?

You are so right. Thank you. I feel silly that I mistook the square end of the USB for a firewire. So no way to get a signal into On Location. Toubling that On Location has such limitations - I guess that was a waste of my great expectations.
Since my system has an HDMI card with two plugs (I assume IN and OUT or EITHER) then it's a shame that OnLocation cannot see that card. I assume that with the firewire, the camera is already compressing the signal and sending a smaller datastream to OnLocation. I understand that the HDMI sends a datastream on the order of 200gb/sec.
I like the camera so far, in spite of this challenge. Any ideas of how to link it to On Location for studio work is greatly appreciated. It would be a great way to scope the shots and tweak the lighting and such.

Similar Messages

Has anyone tried a *real* role-link ? - (bea support pls respond)

Hi
Has anyone tried using different role-name and role-link in the security-role-ref section of web.xml.
isUserInRole method fails with this.
given a section in web.xml as:
<security-role-ref>
<role-name>xyz</role-name>
<role-link>abc</role-link>
</security-role-ref>
<security-role>
<role-name>abc</role-name>
</security-role>
u would say isUserInRole("xyz"); right?
but weblogic 5.1 always returns false
it instead behaves properly with isUserInRole("xyz"); which is wrong behaviour.
Please correct me if i am wrong.
thanks
sriram

I don't have a definitive answer, but I would guess you won't find a tech support service dedicated to the Flash Player since it is free software and customers apparently have problems getting tech support for the products they buy. But here are a couple of things worth considering.
Try posting/looking thru the Flash Player forum...
http://forums.adobe.com/community/webplayers/flash_player
Try submitting a bug report...
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?

Has anyone tried changing the drummer on a drummer part that has already been placed into a track stack?
I find that if I do that, the parts in the stack all get merged together with no way to expand them (ie the triangle you would click on to expand the stack disappears).
I believe this is a bug, and wonder if anyone else has encountered it?

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried using "ffmpegx" to compress video files to Xvid files?

Has anyone tried using the program ffmpegx to compress your video files into Xvid files? Still trying to find a magic solution to save some space on my hard drive

Mac Fool wrote:
Unfortunately, when I click on the link I get "Error: you do not have permission to view the requested forum or category".
i believe the thread was removed due to the discussion was not in accordance with the ToU of the forum. it was a heated discussion as well (i was following it).
here's a similar discussion from the Apple TV forum. note the very last post ...
http://discussions.apple.com/thread.jspa?threadID=2313089&start=0&tstart=30
JGG

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

Has anyone tried to trade in the their iphone5 for the gift card that can be used to buy iphone6?

csa3, I want to make sure you are able to take advantage of this offer. Have you submitted a Preorder for the iPhone 6? If so, you can submit your appraisal before September 30, 2014 using the following link: http://bit.ly/GGnDDC
AndreaS_VZW
Follow us on Twitter @VZWSupport

Has anyone tried the Normalizer app?

Has anyone tried the Normalizer app? We are looking for something that will normalize job level for us. The only app I have found was the normalizer and a lot of the links on their website don't work and it doesn't look like they have has any activity on their site for over 6 months.

Great!! Thanks LB
From: Leigh Burke
Sent: Sunday, January 04, 2015 2:14 PM
To: Thomas Reyto
Subject: You have been mentioned by Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners
http://topliners.eloqua.com/
You have been mentioned
by HYPERLINK "http://topliners.eloqua.com/people/lburke?et=notification.mention"Leigh Burke in Re: Has anyone tried the Normalizer app? in Topliners - HYPERLINK "http://topliners.eloqua.com/message/56819?et=notification.mention#56819"View Leigh Burke's reference to you

Has Anyone tried to use DDE through Applets

I would like to update a client side opened Excel file via the web using DDE ( Windows protocol used to cut and paste between apps ) and an applet.
I guess that the level of security of the sand-box will limit the interaction with the excel application unless the applet jar is signed and certified.
Has anyone tried to develop such application ?
I didnt go through all the DDE technology yet and I am just wondering if there are some great difficulties to overcome.
Any "difficult to find" hints are welcome
Thanks

Thanks for the hint. A good one as I did not know this link.

Has anyone tried the suggestion from the macfixit site

see my earlier post, "painfully slow connection".
Has anyone tried installing the combo 10.4.5 update from the mac support site.
my imac came with 10.4.4 so I assume autoupdate just installed the latest delta, but perhaps there is a problem with the installer and an incorrect library version was linked with the library. Just surmizing , but that could cause a problem.
Anyway reinstalling the update won't hurt anything I don't think anyway.

I tried it and it didn't do anything noticable. At first I downloaded the PPC version by mistake and it wouldn't accept it. A little more digging turned up the intel version. But again no change.
What I found that is working for me is setting up my router to work in "b" wireless mode instead of "g" or "b/g". It has solved the problem for now and since the speed to the router still exceeds that of my ADSL line I have noticed nothing but fast and consistent internet access.
Mike

Has anyone tried to 'adapt' the site wizard form?

I'd like to add some extra fields to the basic form - has anyone tried this at all?

Ah-ha Thank you the _shocker, basically I have added a number of extra fields now into the sitewizard template but need to know how to link up the php scrip...
My html is:
<div id="apDiv7"><form action="feedback.php" method="post">
<table width="852" height="409" border="0" cellpadding="6" cellspacing="6">
<tr>
<td align="right"> </td>
<td> </td>
<td align="right"> </td>
<td width="256"> </td>
</tr>
<tr><td width="122" align="right"><label for="tswname">*Name</label>
:</td>
<td width="217"><input name="fullname" type="text" id="tswname" onblur="MM_validateForm('tswname','','R');return document.MM_returnValue" size="30" /></td>
<td width="186" align="right"><label for="tswchildsname">Childs Name</label>:</td><td><input type="text" name="childsname" id="tswname2" size="30" /></td>
</tr>
<tr><td align="right" valign="top"><label for="tswaddress">Address</label>:</td><td><textarea name="address" cols="23" rows="3" id="tswaddress" address="Address"></textarea></td>
<td align="right" valign="top"><label for="tswstartage">
<br />At what age would you like your child to start?</label>:</td><td valign="top"><p>
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_0" />
    2 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_1" />
    2.5 years</label>
<br />
<label>
    <input type="checkbox" name="Startage" value="checkbox" id="Startage_2" />
    3 years</label>
<br />
</p></td>
</tr>
<tr><td align="right" valign="top"><label for="tswphone1">*Phone number<br />(home)</label>:</td><td><input name="phone1" type="text" id="tswphone1" onblur="MM_validateForm('tswphone1','','R');return document.MM_returnValue" size="30" /></td>
<td align="right"><label for="tswchilddob">Childs date of birth</label>:</td><td><input type="text" id="tswdob" name="childdob" size="30" />
</tr>
<tr><td align="right" valign="top"><label for="tswphone2">Phone number<br />(mobile)</label>:</td><td><input type="text" id="tswphone2" name="phone2" size="30" /></td>
<td align="right"><label for="tswcomms">*Preferred method of communication</label>
    :</td>
<td><p>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_0" />
      phone</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_1" />
      email</label>
    <label>
      <input type="radio" name="comms" value="radio" id="comms_2" />
      mobile</label>
</p>
<tr><td align="right" valign="top"><label for="tswemail">*Email address</label>
      :</td><td valign="top"><input name="email" type="text" id="tswemail" onblur="MM_validateForm('tswemail','','RisEmail');return document.MM_returnValue" size="30" /></td><td align="right" valign="top"><label for="tswmessage">Message </label>:<br />
<br />
<br />
<br /></td><td><textarea name="message" cols="23" rows="3" id="tswmessage"></textarea>
</tr>
<tr>
    <td height="41" align="right"> </td>
    <td valign="top">* Denotes required field</td>
    <td height="41" align="right"> </td>
        <td height="41" align="center" valign="top"><input type="submit" value=" Send " /></td>
</table>
</form>
</div>
and the generic php script that I need to adapt is:
[Copyright script deleted by moderator. The script's terms of use state explicitly that it cannot be reproduced or distributed,.]
I just don't get which bit of the php I need to change to add in the extra fields that I require...

Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud? The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to. Help please!

Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud? On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both. What experiences has the community had? I'm also having syncing issues with photos most recently as well as contact updates. (I have an iPhone 4S with the iOS7.1) Thanks much!

It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
http://support.apple.com/kb/HT1766
http://support.apple.com/kb/HT5262
If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

Has anyone tried this Dj thing?

http://www.nseriesindia.com/DJ/DjRegistration.asp
Has anyone tried it? and does it work?
Nokia N95
V 20.0.015
0546553

28-Jun-200704:09 AM
6280 wrote:
http://www.nseriesindia.com/DJ/DjRegistration.asp
Has anyone tried it? and does it work?
Yes, it does. But I'm not referring to the particular link you gave. The DJ app works fine.
500.21.009
02-06-2010
RM-346
Nokia E71-1 (27)

Has anyone tried a Western Digital SATA RAID hard drive on a non-RAID controler?

Because of a compatability problem, I want to try a different brand of SATA II drive on my non-RAID motherboard. The WD RAID drives have great specs but I don't know if they will work. WD says they are ONLY for RAID and not to put them on a non-RAID board. My theory is that they will be more reliable over the long term because they are a heavier duty drive.
Has anyone tried this and if so, what were the results?

I think there was some confusion about what I am asking. It is definately not a duplication of my other post and some of the information in that other post is incorrect because I JUST found out that my motherboard controller IS a RAID controller even though I am not using it as one. I will correct that when I am finished with this post.
The other post was about a specific model of Maxtor drive that doesn't work on my motherboard. This post is about Western Digital. The only reason that I even mentioned the word RAID in my previous post is that there is a known compatibility problem with RAID controllers and that drive. I wanted to emphasize that my problem was not the one of that known compatibility problem, but because it is a RAID controller, it might be that problem.
When you use the motherboard's controller as a non-RAID controller, you do format the drives individually, not as a RAID. I know that because I did it that way, not realizing I even had the option of using RAID on this board. That works fine on one model of Maxtor hard drive and does not work at all on the other model of Maxtor hard drive.
What I want to know now is: Will the Western Digital RAID drives will work on a non-RAID controller. The controllers on my add-in card is not RAID. Also, will that drive work on my motherboard's controller even though it is not being used as RAID.
Here is a link to the WD site's description of one such drive. There are several other WD RAID drives, this is just one example... http://www.wdc.com/en/products/Products.asp?DriveID=238&Language=en It does not state whether or not they will work well in a non-RAID environment.

Has anyone tried to use the Online Edition of Quickbooks and Tiger?

I work from home as an editor. My employer has just set up payroll using the Online Edition of Quickbooks. When I tried to to login I got this message from Quickbooks:
"For business and tech reasons we designed Online Edition specifically to run on Windows. We do not offer an alternative version at this time. Customers have reported using a PC emulator, such as Microsoft's Virtual PC, to run Online Edition on their Macs. This may decrease application performance in terms of speed. We encourage you to research this approach to see whether it will work for you."
Has anyone tried this?
Also, they set up Online Edition to run with Internet Explorer. I use Safari.

i donot know the server he used in his example. All you need is to
replace the server deployment descriptors he used to weblogic descriptors. then rebuild. go to admin tool--localhost:7001/console
and login with weblogic as username and password
then on ejb you can then deploy the ejb.read on the console.
sumelong

Has anyone tried pre-compression to improve image quality?

I am having a hard time creating a usable disk image in iDVD from my 1 hr 45 min FCE movie. Portions of the video are extremely pixelated, usually the grainier, lo-light clips.
Since I don't have Compressor or DVD Studio Pro to use to get more control over the compression, I considered trying to "pre-compress" my video by exporting the entire master sequence using Quicktime conversion to an Mpeg4 format and playing with the data rate so that it would be well under the 4 GB limit of a DVD5. Then I was going to re-import the Mpeg4 into a new FCE sequence, add chapter markers and export again as Quicktime movie into iDVD.
My reasoning is that iDVD will no longer have to compress the file and the pixelization won't be there if it isn't there in the Mpeg4. Has anyone tried anything like this to overcome iDVD's compression and get more control?
If you think I should post over at iDVD forum please let me know.
Thanks in advance,
Mike

What you want to do does not make sense. You are going to ADD more compression
iDVD will compress your video no matter what you do ... it has to, in order to create the MPEG2 that comprises a DVD. iDVD will always do this ... even if you could create your own MPEG2 (which you can't do if you don't have Compressor) it would still try to do that compression ... it is a consumer app designed for ease of use
The more you "step on" your video before it goes to to iDVD the worse it will be.
You are right; you need more control over your MPEG2 compression and you can't tinker with iDVD's compression engine like you could with Compressor
The symptons you describe are not unusual. I fin that anything over 90 minutes in iDVD can give you potential probs. The quality of the original video had to be really, really high ... and doing a double compression ain't gonna help that.
Is it feasible to split the project in half and make two DVDs? If the project is under an hour, you can use iDVD's Best Performance preference which tends to give you a better result.
Remember, iDVD doesn't really care about the "size" of your project, only its length, so tinkering around to reduce the file size won't help you.
It is unfortunate that Compressor is not a standalone program and that DVD Studio Pro is now only included as part of the Final Cut Suite. I suppose you could troll e-Bay to see if there are any older, independent versions of the program still kicking around

Has anyone tried Displayport to VGA adaptor for T410S?

I found Displayport to VGA cable for T410S on Lenovo site.
Lenovo DisplayPort to VGA Monitor Cable 57Y4393
I just wonder if DP can directly transfer to analog port?
Has anyone tried this?
Solved!
Go to Solution.

Does the T410s not have a VGA port built right in? I know my T510 does and I'm almost certain the regular (non-"s") T410 has one.
ThinkPad T510 : i5-540M : 8GB PC-10600 : 500GB 7200rpm : 15.6" HD+ : Intel 6300 : Win7 Pro 64 : 9Cell
Ordered 2/Feb/2010 : Shipped 22/Feb/2010 : Received 3/Mar/2010

Has anyone tried to link a Panasonic AG-HMC70P to On Location?

Similar Messages

Maybe you are looking for